• Please use the combo installer available in this page when you need to uninstall the former version network driver.
• The new features and fixed bugs are available at the DME-N Network Driver downloads page.

New Features

• Now supports Windows 7 and 64-bit Vista.
• [SP2060 Backup] has been added to the main panel window [Hardware] menu, allowing internal SP2060 data to be transferred to a computer for backup. Multiple SP2060 units can be restored from the backup data.
• If backup data is restored to an SP2060 unit running a firmware version prior to V1.3, network settings such as IP address will be changed.
  Make sure to restore all the SP2060 units within the device group from the same backup data. If you restore a subset of the SP2060 units, the communication between the master unit and slave units may not be established.
• The IM8, MSR250, and other external devices can now be specified as External Device.
• It is possible to select and install speaker library data for third-party speakers into the Speaker Processor component library.

Fixed Bugs

• Fixed a problem in which the probe monitor or monitoring point operation would freeze up if components were connected with each input port wired.
• Fixed a problem in which synchronization would fail when you saved a project file in DME Designer V3.0 and then loaded it in V3.5, if a DME8i-ES/8o-ES/4io-ES unit was used.

System Requirements