V1.25

Fixed bugs

• Fixed a problem in which the meters of the channels other than the currently selected channel and the adjacent channels did not move when the PM5D and the DSP5D units were cascade-connected and the DSP5D was selected for the PM5D panel operation under the following conditions.
  • The same metering point was specified for the channel strip meters and for the meters at the top of the top panel.
  • The meter of a different layer was displayed on the channel strip meters and the meters at the top of the top panel.
  • A specific screen such as EQ or COMP was displayed.

• Fixed a problem in which the GR indicator of the channel that uses no COMP/GATE function flashed instantaneously by switching the channel layers with a screen other than COMP or GATE screen displayed, when the PM5D and the DSP5D units were cascade-connected and the DSP5D was selected for the PM5D panel operation.
• Fixed a problem in which the GR meter continued to display the maximum value on the panel or screen of the selected channel and its paired channel when the PM5D and the DSP5D units were cascade-connected and the DSP5D was selected for the PM5D panel operation under the following conditions. To fix this problem, update the DSP5D firmware as well as the PM5D firmware.
  • VERTICAL PAIR was selected for the PAIR MODE.
  • GATE and/or COMP of the selected and its paired channels were set to ON.
  • A different layer was selected for the INPUT channel strip meters and for the meters at the top of the top panel.

V1.23

Fixed bugs

• Fixed a problem in which the MIX/MATRIX/STEREO channels patch where the OUTPUT ISOLATION function was set to ON could be changed by scene recall or by loading a file.
• Fixed a problem (only in the display) in which the indication for the patch settings did not show when the effect or GEQ module patch was changed from the inserts into the MIX/MATRIX/STEREO channels to the inserts into the INPUT/ST IN channels.
• Fixed a problem in which the GEQ module patch could be changed even if you locked an INPUT PATCH or OUTPUT PATCH that includes channels into which the GEQ module was inserted in the LOCK PARAMETER SELECT area of the SECURITY screen.

V1.22

Fixed bugs

• Added a confirmation message to prevent inadvertent erasing of some parts of memory on the DSP5D when enabling the cascade-connection between the PM5D and the DSP5D(s). Blank scenes on the PM5D will erase the scene data of the same number on each DSP5D. The PM5D's library data not associated with a scene will be transmitted and overwritten on each DSP5D to synchronize libraries
• Fixed a problem in which some of the panel indications would not be correct, such as encoders' PAN indication and name indicators' brightness, and the send operation could not be performed from the ST IN to the MONO bus using the MIX section encoders when different machines' layers were selected on the INPUT channel strip and the ST IN channel strip while the PM5D and the DSP5D(s) were cascade-connected
• Fixed a problem in which indication of the screen and the panel would occasionally not be consistent when having recalled a scene while two PM5D units were cascade-connected, and the DCA groups and MUTE groups were cascade-linked

V1.20

Fixed bugs

• Two DSP5D units now can be cascade-connected and used (PM5D-DSP5D-DSP5D, PM5D-DCU5D-DSP5D-DSP5D, PM5D-DCU5D-DSP5D-DCU5D-DSP5D).
• Fixed a problem in which the cascade-connected DSP5D units could not properly load a file containing CASCADE TYPE or word clock settings different from the current settings.
• The DSP5D version and the internal battery status are not now shown when the PM5D and the DSP5D are cascade-connected but the connection is disabled. This is because the DSP5D internal battery was shown incorrectly as "No Battery" when the cascade-connection was disabled.
• A word clock source incapable of serving as the master clock now cannot be selected on the WORD CLOCK screen when the PM5D and the DSP5D are cascade-connected.
• After the DSP5D internal memory initialization is complete, the leftmost OUT [TX] LED now keeps flashing until the power is turned off and then on again (the LED used to turn off in about 10 seconds). The four LEDs now flash from the left repeatedly during the initialization (the LEDs used to flash once).
• When the PM5D/DSP5D for which the cascade-connection is enabled is turned off and then on again, the cascade-connection now becomes enabled automatically. Until the cascade-connection is enabled, a "Waiting for Auto Cascade Sync" message is now shown. To cancel the cascade-connection being enabled, select machine #1 (PM5D) then disable the cascade-connection using the CASCADE ENABLED/DISABLED button.
• Fixed a problem in which the PM5D-RH was disconnected from the AD8HR and/or the AD8HR gain setting was changed to 6-dB steps when five or more AD8HR units were connected to the PM5D-RH for extended periods.
• Scenes are now recalled faster when the PM5D and the DSP5D are cascade-connected.
• Fixed a problem in which the fader levels shown on the FADER ASSIGN screen sometimes differed from the actual levels.
• Fixed a problem in which the CH to MIX and MIX to MATRIX parameters were not recalled properly when a scene in which MIX channels were paired during PREVIEW was recalled.
• Fixed a problem in which the previous effects sometimes kept being applied when a scene that would change the internal effects to the GEQ modules was recalled.

Known issue

When the cascade-connection between the PM5D and the DSP5D is enabled, a scene for which the trigger condition is specified using INTERVAL on the EVENT LIST screen is occasionally skipped. To make sure the scene is properly recalled, specify the trigger condition using TIME CODE.

V1.11

Fixed bugs

1. The Global Paste function now works properly even when cascade-connection is enabled.
2. Even when cascade-connection is enabled, scene editing operations (insert, cut, paste, clear) and undo operations for scene store/recall now work properly.
3. Fixed a problem in which a scene shown in the scene list could not be sometimes recalled or edited (insert, cut, paste, clear) if a scene was edited several times.
4. Even when a device other than machine #1 (PM5D) is selected as the target of the PM5D's panel operations and a scene including a fade time setting is recalled, the faders now move properly according to the fade time setting.
5. DME control functions routed through an MY16-CII card now work properly.
6. Fixed a problem in which a scene could not be undone if the DIRECT RECALL function was assigned to a User Defined Key and the scene was recalled.
7. Fixed a problem that occurred when the internal effects were used for the GEQ module.
8. Fixed a problem in which cascade-connection (PM5D — DCU5D — DSP5D) would occasionally not be restored even if the network was restored after the connection was temporarily disconnected due to network failure, etc.