Current Version Info

V2.03

Note

• In order to use the editor software with firmware V2.03, you MUST use M7CL V2 Editor V2.5.1.

Improvements

• The BUS SETUP parameters (BUS TYPE/PRE FADER SEND POINT/PAN LINK) are now included for Global Paste operations if you select ALL for MIX/MATRIX channels.
• The SEND LEVEL parameters are now passed from odd-numbered buses for Global Paste operations when the SIGNAL TYPE of the buses is set to STEREO for the copy source and MONOx2 for the paste destination if you select ALL for the MIX/MATRIX channels.
• Improved the automatic insertion on/off behavior when specifying or clearing a GEQ insertion.
• The MONITOR FADER can now be reset to 0dB if you press the on-screen MONITOR FADER knob while holding down the user-defined key to which SET NOMINAL is assigned.

Fixed bugs

• Fixed a problem that sometimes caused most parameters of the console to become inoperable after the following operation: Assign MONITOR FADER LEVEL to the STEREO MASTER fader or MONO MASTER fader. Turn off the console and turn power back on. Press the CUE key of the MASTER fader assigned to the MONITOR FADER LEVEL function.
• Fixed some problems which happened for Global Paste operations as follows:
  Fixed problems in detail
  • Fixed a problem that could happen when the SIGNAL TYPE of the buses was set to MONOx2 for the copy source and STEREO for the paste destination if you selected ALL or WITH SEND FROM SOURCE CHs for the MIX/MATRIX channels.
  • Fixed a problem that could happen when the SIGNAL TYPE of the buses was set to MONOx2 for the copy source and STEREO for the paste destination if you selected ALL or WITH SEND FROM SOURCE CHs for the MIX/MATRIX channels.
  • Fixed a problem that could happen when the BUS TYPE of the buses was set to VARI for the copy source and FIXED for the paste destination if you selected the SEND parameters for the INPUT channels.
  • Fixed a problem in which the insertion would not be turned on automatically at the paste destination scene if a GEQ was inserted for the copy source.

• Fixed a problem so that you can now adjust the level balance within the link group using the multiple faders when you press one of the [SEL] keys to temporarily defeat the channel link.
• Fixed a problem in which the "temporary defeating" channel link was cancelled when you adjusted another channel fader while temporarily defeating the channel link by pressing the [SEL] key if "AUTO CHANNEL SELECT - INPUT" and "[SEL] -> [NAVIGATION KEY] LINK" were on.
• Fixed a problem in which the user at which MIX/MATRIX channel WITH MIX/MATRIX SEND was turned off as ACCESS PERMISSION could change the SEND PRE parameters.
• Fixed a problem in which the Help would not appear correctly if you pressed an on-screen place of firmware V2 new features while holding down the user-defined key to which HELP was assigned. To fix the problem, you need to download the updated Help file from our website and load it on your console.
• Fixed a problem in which the signal of ST IN channel 4R would be input if you selected SELF PRE EQ as the KEYIN signal for the ST IN channel 4L DYNAMICS1.

Supplementary Information

• In Global Paste operations, unlike other similar operations, the Insert Out and Direct Out parameters of input channels are included not in INPUT PATCH but in OUTPUT PATCH.
• Some parameters included in OUTPUT for Global Paste operations differ between those when ALL is selected and those when WITH MIX SEND/WITH MATRIX SEND is selected. When ALL is selected, this includes SIGNAL TYPE (STEREO/MONOx2) and PAN LINK but excludes SEND PAN (from input channels). When WITH MIX SEND/WITH MATRIX SEND is selected, this includes SEND PAN but excludes SIGNAL TYPE and PAN LINK.
• When you "global paste" to scenes in which some input channels are linked, the copied parameters are pasted only to the input channels selected as the paste destination.
• When you load a file saved in M7CL V1 to an M7CL running firmware Version 2, the channel library data of the previous session remains accessible. When a V1 file is loaded to the M7CL V2 Editor, the channel library data of the previous session is cleared.
• If an Administrator, External User, or Guest user is logging in while the connection with the M7CL V2 Editor is online, the Preference settings will be updated only when you perform the Re-synchronization operation (not updated in real time).
• If Administrator user is logging in while the connection with the M7CL V2 Editor is online, the Preference settings for Guest will be updated only when you perform the Re-synchronization operation (not updated in real time).