Current Version Info

V2.05

Fixed Bugs

• Fixed a problem in which a scene would not be recalled properly when the last event of the TC EVENT list was executed and then was returned to the first, and the duration between the first and the last event was one hour or less.
• Fixed a problem in which the CS1D and the DSP1D would recall a different scene when the user recalls a scene with a function other than TC EVENT, after the last event in the TC EVENT list was executed.
• Fixed a problem in which the CS1D and the DSP1D would have a different scene status when the engine was switched after recalling a scene with the TC EVENT function in Mirror mode.
• Fixed a problem in which the setting would not be stored when clicking the [APPLY EDIT] button after REV TIME was edited for a library in which either "REV-X Hall," "REV-X Room" or "REV-X Plate" was stored as the effect type in the PM1D Manager effect library pop-up window.
• Fixed a problem in which the setting would not be recalled when clicking the [RECALL] button after REV TIME was edited for a library in which either "REV-X Hall," "REV-X Room" or "REV-X Plate" was stored as the effect type in the PM1D Manager effect library pop-up window.
• Fixed a problem in which the REV TIME would not change when editing ROOMSIZE for a library in which either "REV-X Hall," "REV-X Room" or "REV-X Plate" was stored as the effect type in the PM1D Manager effect library pop-up window.
• Fixed a problem in which the variable range value below the REV TIME knob would not be shown properly when a library was opened in which either "REV-X Hall," "REV-X Room" or "REV-X Plate" was stored as the effect type on the PM1D Manager effect library pop-up window.
• Fixed a problem in which PM1D Manager in the online condition with the console or the engine would go offline when another PM1D Manager tried to go online with the console or the engine that was not connected online.

System Requirements

for Windows 7

CPU:	1.4GHz or higher Intel Core/Pentium/Celeron family processor;
OS:	Windows 7 (32-bit; Ultimate / Professional / Home Premium)
Hard Disk:	10 MB or more
Memory:	1GB or more
Display:	1024 x 768 pixels or higher; High Color 16-bit or higher
Other:	Serial port * You will need an RS-232C cable (cross-wired) not exceeding 5 meters, or a USB cable not exceeding 3 meters.

for Windows Vista

CPU:	1GHz or higher Intel Core/Pentium/Celeron family processor
OS:	Windows Vista(32-bit; Ultimate/Enterprise/Business/Home Premium/Home Basic)
Hard Disk:	10 MB or more
Memory:	512 MB or more
Display:	800 x 600 pixels and 16 bit color (SVGA, High Color) or higher
Other:	Serial port * You will need an RS-232C cable (cross-wired) not exceeding 5 meters, or a USB cable not exceeding 3 meters.

for Windows XP/2000/Me/NT/98/95

CPU:	An IBM PC/AT compatible computer with at least a Pentium II 233 MHz or equivalent CPU (Pentium II 350 MHz or faster is recommended)
OS:	Windows XP Professional / XP Home Edition / 2000 / NT 4.0 (Service Pack 6a or later) / Me / 98 / 95
Hard Disk:	10 MB or more
Memory:	64 MB or more memory (128 MB or more is recommended)
Display:	800 x 600 pixels (SVGA, High Color) or higher
Other:	Serial port * You will need an RS-232C cable (cross-wired) not exceeding 5 meters, or a USB cable not exceeding 3 meters.

Depending on your hardware or OS, system requirements may be greater than listed above.

If you are using a notebook computer, system requirements may be greater than listed above as the minimum. Also, communication may become unstable due to the power management settings in the Windows Control Panel, or due to power management settings specific to notebook CPUs (e.g., SpeedStep (Intel Corporation), PowerNow! (AMD Corporation), or LongRun (Transmeta Corporation)). Please disable these power management settings and use your computer with its power supply adaptor connected.