PM5D V2Editor

  • The PM5DV2 Editor is for use with the Studio Manager V2 Host and USB-MIDI Driver. Be sure to use the latest versions of both the Studio Manager V2 Host and USB-MIDI Driver. Both are available from this site.
  • Use the Editor with the supported firmware listed in the following table. Using an unsupported Editor/firmware combination may result in data corruption and unexpected behavior. If a failure occurrs, turn the power ON while pressing the [STORE] key on the panel, and then select INITIALIZE ALL MEMORIES to restart normally.
  • "PM5DV2 Editor for PowerPC" can run on Intel Mac machines via Rosetta, but cannot run simultaneously with "M7CL V3/LS9/DSP5D Editors". If you wish to use PM5DV2 Editor and "M7CL V3/LS9/DSP5D Editor" at the same time, you must use "PM5DV2 Editor for Intel Mac

PM5DV2 Editor/Firmware Compatibility ( Win )

PM5DV2 Editor/Firmware Compatibility (Mac / Intel )

  • Do not use Studio Manager V2 Host via Rosetta when using PM5DV2 Editor for Intel Mac. "PM5DV2 Editor for Intel Mac" cannot be added to Studio Manager via Rosetta.

PM5DV2 Editor/Firmware Compatibility (Mac / Power PC )

  • Files saved using later Editor or console versions cannot be loaded into earlier versions.
  • Communication with the Editor automatically goes offline while the PM5DV2/DSP5D is loading a file or synchronizing for cascade connection. Synchronize the editor with the PM5DV2/DSP5D after the process is completed.
  • The PM5DV2 Editor cannot go online until the BUSY indicator at the top of the display (in the constant display area) goes out after the PM5DV2 is started. Synchronize the PM5DV2 Editor with the PM5DV2 after the BUSY indicator goes out. For the DSP5D, wait for a while after startup to synchronize the DSP5D Editor with the DSP5D as well.
  • The following operations cannot be performed on the editor when cascade connection is enabled.
    •  Scene and library editing (copy, move, undo, clear, or store).
    •  "PC to Console" synchronization (DSP5D).

Current version

V2.2.6
for Mac OS X (Intel Mac)

  • Release version for Intel Mac.

V2.2.5
for Win (7/Vista/XP), for Mac OS X(Power PC)

New Feature

  • Now supports Windows 7 and Snow Leopard.

Known problem when used on the new OS

  • Scroll bars may not be displayed properly when the display DPI is set to 125%. (Windows 7)
  • The BATTERY status picture may not appear properly in PREFERENCE page. (Mac OS X 10.6)

Fixed bug

  • Fixed a problem in which the signal processing and screen statuses were not identical when patching the same port simultaneously to each Insert Out in the Input Patch library and Output Patch library by for example, recalling a library which inserts the same GEQ module.

System Requirements

 
OS: Windows 7: Ultimate / Professional / Home Premium
Windows Vista: Ultimate/Enterprise/Business/Home Premium/Home Basic
Windows XP: Professional SP2 or later/ XP Home Edition SP2 or later/ XP Tablet PC Edition 2005
Mac OS X: 10.4 or lator(10.58/10.6.X for the PM5DV2 Editor V2.2.6 or higher)
Hard Disk: 100 MB or more
Display:1024 x 768 pixels or higher; High Color 16-bit or higher
Other:Pointing device such as a mouse, USB port
Windows Vista/7
CPU: 32bit : 1.4GHz or higher Intel Core/Pentium/Celeron family processor
64bit :Intel 64 compatible processor
Available Memory:1GB or more(2GB or more on windows7 64bit)
for Windows XP
CPU:800MHz or higher Intel Core/Pentium/Celeron family processor
Available Memory:512 MB or more
for Mac OS X (for Power PC)
CPU:Power Mac G4 or higher
Available Memory:512MB or more
Caution: Use the PowerPC when using the Editor V2.2.5 or earlier.
for Mac OS X (for Intel)
CPU:Intel Core family processor
Available Memory:1GB or more
Caution: Execute the Studio Manager V2 via Rosetta when using the Editor V2.2.5 or earlier.

TOP