I/O Card Matching

How to use this page

  1. Click “Select” button of the host model.Please read the displayed [NOTE] carefully that gives important information on the use of specific cards with the host model.
  2. Please select the QTY of the card(s) you would like to install into the host model, and click “Check” to see if you can safely use them in combination. You cannot select QTY of the cards unusable with the host model. Total QTY should not exceed the available number of slots.
  3. If you would like to try different configuration, please click "Clear" and follow 2.

* This check sheet calculates if the total power consumption of the cards you have selected stays within the power supply limit of each host model. Please follow the guideline so that you won't damage the equipment.

Host Models

Discontinued products

Results

Selected model? Number of slots Result Card selected
01V 1 - -

Note

MY8-mLAN with 01V
- MY8-mLAN is fully supported with 01V FirmwareV1.06 or later. Both mLAN audio and MIDI transmission is possible.
- With 01V FirmwareV1.05 or before, MY8-mLAN is recognized as MY8-AE and 8IN/8OUT audio data transmission is possible.
* For 01V Firmware Upgrade, please talk to your local Yamaha service center,
or alternatively you can get the instruction and software from download section.
- Use MY8-ADDA96 by setting the mode to AE.

Yamaha Products

Card Description Item Code Ch Format Resolution QTY
AD Card MY4-AD 4 - 24bit
AD Card MY8-AD 8 - 20bit
AD Card MY8-AD24 8 - 24bit
AD Card MY8-AD96 8 - 24bit
DA Card MY4-DA 4 - 20bit
AD/DA Card MY8-ADDA96 8 - 24bit
Digital I/O Card MY8-AE 8 AES/EBU 24bit
Digital I/O Card MY8-AT 8 ADAT 24bit
Digital I/O Card MY8-TD 8 TASCAM 24bit
mLAN Interface Card MY8-mLAN 8 IEEE1394 24bit
mLAN Interface Card MY16-mLAN 16 IEEE1394 24bit

Third-party products

Card Description Item Code Ch Format Resolution QTY
AVIOM A-Net Interface Card AVIOM16/o-Y1 16 A-Net Pro16 24bit
RIEDEL RockNet Interface Card RN.341.MY 16 RockNet 24bit