V2.30
Fixed Bugs
- The 01V96V2 now supports the MY16-CII card with the following restrictions.
- The card is shown as "MY16-C" on the LCD display, since it has the same ID as the MY16-C.
- As with the MY16-C, the console does not support CobraNet serial communication.
- Fixed a problem that the MY16MADI64 card made by AudioService was recognized incorrectly as the MY8-AE when the card was inserted into the slot (occurring in V2.24). The card is now recognized as MY16-AT when the Mode switch is set at 56ch/64ch and MY8-AE96 when the switch is set at DFS.
V2.24
Fixed Bugs
There was a problem that some MY-Cards were occasionally not recognized properly when inserted into a slot, which sometimes prevented the console from being launched, and showed an error message indicating that the consumption current exceeded the limit. The new version has fixed the problem by changing the determination method for MY-Cards.
V2.23
Fixed Bugs
A bug regarding RECALL SAFE is fixed.
When recalling a scene which contains different group assignments from the current scene, the group assignments change even if Recall Safe is set for these channels. The bug is fixed in this version.
V2.22
Fixed Bugs
Improvement of fader position detecting.
The detection of fader positions has been improved in response to variances in the hardware's accuracy. This also improves the effectiveness of the Fader Calibration process.
V2.21
New Features
- The following effect programs are added to the Effects library to correspond to the new Add-On Effects Packages, AE051 (Vintage Stomp Package).
- [No.54] Max100
- [No.55] Vintage Phaser
- [No.56] Dual Phaser
- Turn on the power while holding down the [EFFECT] key in the DISPLAY ACCESS section. Then Add-On Effects Demo Function works. All Add-On Effects, AE011, AE021, AE031 and AE051 are available for 10 minutes. 10 minutes later, if there are some Add-On Effects that have not been installed, the LCD display shows the message, "End of Add-On Effect Demo Mode (10 min. up)." and the effects will be muted and not be available. [NOTE] If you use the scene data for recalling this function in a normal mode, the effect that has not been installed will not be recalled and the previous effect will remain.
- AE011 (Channel Strip Package)
- AE021 (Master Strip Package)
- AE031 (Reverb Package)
- AE051 (Vintage Stomp Package)
Fixed Bugs
When receiving a scene protect parameter from Studio Manager, the console sent a program change message to other MIDI equipment which was connected to the console. This bug is fixed in this version.
V2.04
Fixed Bugs
The warning message for a low battery, which appears when the power switch is turned on, is changed. A pop-up message is added besides the blinking warning message. (The pop-up message remains visible until the OK button is pressed or a new page is selected on the LCD).
