V1.22

Fixed bugs

• Fixed a problem in which a scene on the cascade slave PM5D would occasionally not be recalled when recalling the scene of two cascade-connected PM5D units from an external GPI device which was connected to the cascade master PM5D
• Fixed a problem in which some settings, such as INPUT/OUTPUT PATCH and MIDI CONTROL CHANGE, would not operate correctly as indicated on the screen when the data created from the PM5D V1 was loaded into the PM5D V2
• Added a confirmation message to prevent inadvertent erasing of some parts of memory on the DSP5D when enabling the cascade-connection between the PM5D and the DSP5D(s). Blank scenes on the PM5D will erase the scene data of the same number on each DSP5D. The PM5D's library data not associated with a scene will be transmitted and overwritten on each DSP5D to synchronize libraries
• Fixed a problem in which some of the panel indications would not be correct, such as encoders' PAN indication and name indicators' brightness, and the send operation could not be performed from the ST IN to the MONO bus using the MIX section encoders when different machines' layers were selected on the INPUT channel strip and the ST IN channel strip while the PM5D and the DSP5D(s) were cascade-connected
• Fixed a problem in which indication of the screen and the panel would occasionally not be consistent when having recalled a scene while two PM5D units were cascade-connected, and the DCA groups and MUTE groups were cascade-linked

V1.11

Fixed bugs

1. The Global Paste function now works properly even when cascade-connection is enabled.
2. Even when cascade-connection is enabled, scene editing operations (insert, cut, paste, clear) and undo operations for scene store/recall now work properly.
3. Fixed a problem in which a scene shown in the scene list could not be sometimes recalled or edited (insert, cut, paste, clear) if a scene was edited several times.
4. Even when a device other than machine #1 (PM5D) is selected as the target of the PM5D's panel operations and a scene including a fade time setting is recalled, the faders now move properly according to the fade time setting.
5. DME control functions routed through an MY16-CII card now work properly.
6. Fixed a problem in which a scene could not be undone if the DIRECT RECALL function was assigned to a User Defined Key and the scene was recalled.
7. Fixed a problem that occurred when the internal effects were used for the GEQ module.
8. Fixed a problem in which cascade-connection (PM5D — DCU5D — DSP5D) would occasionally not be restored even if the network was restored after the connection was temporarily disconnected due to network failure, etc.