V1.2.0

New feature

The driver now supports Windows Vista.

Fixed Bugs

1. Fixed a problem in which an existing MIDI driver such as a USB MIDI driver would not sometimes work after the DME-N Network Driver was installed.
2. Fixed a problem that Studio Manager would sometimes unexpectedly quit when enabling both the MIDI port of the DME-N Network Driver used by DME Designer and another MIDI port of the DME-N Network Driver in Studio Manager.
3. Fixed a problem in which the synchronization between M7CL/LS9 Editor and the M7CL/LS9 would sometimes stop.
4. Fixed a problem in which the [Apply] button in the DME-N Network Driver control panel would sometimes not work properly when the device settings were changed.
5. Fixed a problem in which the MAC address of the device which had been deleted last would be shown if a device IP address was input after all devices were deleted by pressing the [Remove] button on the DME-N Network Driver control panel.
6. A warning message indicating that the settings cannot be changed now appears if the DME-N Network Driver control panel is opened with an account other than administrative account.
7. The warning message "Quit all applications that use the DME-N Network Driver in order to change settings" now appears when you try to save the DME-N Network Driver settings while an application is using the driver. Quit all applications that use the driver to change the settings.
8. The initial view of the Target Device List on the DME-N Network Driver control panel is now shown properly without a horizontal scroll bar.

V1.1.3

Fixed Bugs

1. Fixed a problem that the computer could not communicate with the DME in a condition unless the computer was not restarted again, when the first device was registered on the control panel after the DME-N Network Driver was installed and then the computer was restarted.
2. Fixed a problem that some letters for the buttons on the control panel were not shown on a Chinese Windows OS.

V1.1.2

Fixed Bugs

1. A forced termination causes when quitting from DME Designer after changing IP address. This is caused with some specific PC.
2. A forced termination causes when quitting from DME Designer after disconnecting a network cable. This is caused after making network connection with DME by using some specific PC.
3. A forced termination causes when launching Studio Manager after disconnecting a network cable. This is caused after making LS9 Editor online and quitting from it.

V1.1.1

Fixed Bugs

1. There was a problem that when unplugging the Ethernet cable between the M7CL and a computer to which the DME-N Network Driver V1.1.0 and the M7CL Editor was installed after connecting to the M7CL online via computer and closing the M7CL Editor, the Editor could occasionally not be reconnected online. This problem was fixed by using the M7CL V1.11 with the DME-N Network Driver V1.1.1.
2. Devices not selected on the Target Device List, which was being sorted from the "DME-N Network Driver" window, would be also deleted by clicking the REMOVE button.

V1.1.0

Fixed Bugs

1. DME-N Network Driver now supports multi-client operation. DME-N Network Driver is available for multiple host applications (DME Designer, Studio Manager, etc.) simultaneously.
2. All the devices can be sorted in the Target Device List. Devices can be removed, duplicated or undone on the control panel.
3. Using the Auto Detect function, devices connected on the network are automatically detected. The driver then adds them to a list of detected devices, among which any preferable devices are registered to the Target Device List.
4. The [TCP/TCP-KEEPALIVE] setting has been removed from the control panel and it is always set to TCP-KEEPALIVE.
5. While a host application (DME Designer, Studio Manager, etc.) is using the DME-N Network Driver, the DME-N Network Driver settings cannot be changed.
6. The configuration can be saved to or read from a file.