
The installer application in CD-ROM may not be supported by the latest OS. Please refer to the following information to install the Add-on Effects and/or V2 software.
You may install the firmware by using the installer that is available on this page. When an installer requests a Product ID please enter the ID which is attached to your CD-ROM product.
At the final stage of installation, a dialog box displaying "This program may not be installed properly" may appear, but actually the installation has completed.
Even if the port name is not displayed properly, continue the procedure and installation will be done properly.
| CPU: | 1.4GHz or higher Intel Core/Pentium/Celeron family processor |
| OS: | Windows 7 (32bit), Vista (32bit) |
| Hard Disk: | 30 MB or more |
| Memory: | 1GB or more |
| Display: | 1,024 x 768 pixels or higher; High Color 16-bit or higher |
| Other: | USB port |
| CPU: | 433MHz or higher Intel Core/Pentium/Celeron family processor |
| OS: | Windows XP, 2000 |
| Hard Disk: | 10MB or more |
| Memory: | 128MB or more |
| Display: | 1024 x 768 pixels, 256 colors or higher High Color 16bit recommended |
| Other: | USB port |
| CPU: | Mac G4 or higher, or Intel processor |
| OS: | Mac OS X 10.4.1-10.6.x |
| Hard Disk: | 10 MB or more |
| Memory: | 256MB or more |
| Display: | 1024 x 768 pixels, 32,000 colors or more |
| Other: | USB port |
| CPU: | Mac G3/233MHz or higher |
| OS: | Mac OS 9.0-9.2.2 |
| Hard Disk: | 10 MB or more |
| Memory: | 64MB or more |
| Display: | 1024 x 768 pixels, 32,000 colors or more |
| Other: | USB port |