Print This Page

Digital Control Panel - DCP Series

All three models are available in either US or EU standardized sizes, built to meet the specifications of most regions around the globe.

DCP1V4S

  • 1 Volume & 4 Switch equipped Wall Mount Control panel for MTX Series
  • Easy connection by CAT5 carrying RS485 + power
  • Maximum 8 DCPs can be connected to 1 MTX Series

DCP4S

  • 4 Switch equipped Wall Mount Control panel for MTX Series
  • Easy connection by CAT5 carrying RS485 + power
  • Maximum 8 DCPs can be connected to 1 MTX Series

DCP4V4S

  • 4 Volume & 4 Switch equipped Wall Mount Control panel for MTX Series
  • Easy connection by CAT5 carrying RS485 + power
  • Maximum 8 DCPs can be connected to 1 MTX Series

Digital Controller Hub

DCH8

DCH8

Divides the control line from host devices such as the Yamaha MTX/MRX series into up to 8 lines.

Paging Station

PGM1

The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.

PGM1

  • Dante network support
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 4 units can be connected per system
  • PoE powered
  • Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
  • Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)

PGX1

The PGX1 is a paging station extension that can be used with the PGM1.

PGX1

  • Function expansion for the PGM1
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 2 units can be connected to each PGM1
  • Dimensions: 132(W) × 56(H) × 154(D) mm
  • Weight: 0.9 kg (excluding connecting bracket)

Wall-Mount Controller

MCP1

Wall-Mount Controller

MCP1

  • 6 buttons can be assigned to any functions * MTX/MRX series functions (components) are specified via the MTX-MRX Editor
  • Multi-language displays supported
  • Four user levels for access management
  • Up to 16 units can be connected per system
  • PoE powered
  • Back can adapter supplied
  • Dimensions: 149(W) x 125(H) x 18(D) mm
  • Weight: 0.5 kg

L2 Switch SWR21001P series

SWR2100P-10G

The SWR2100P series network switch equipped with ten RJ45 ports.

SWR2100P-10G

  • Ports available for PoE power supply: 1-9 / Up link port: 10
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2100P-5G

The SWR2100P series network switch equipped with five RJ45 ports.

SWR2100P-5G

  • Ports available for PoE power supply: 1-4 / Up link port: 5 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

Input Expander/Output Expander

EXi8

EXi8

EXi8 input expanders convert analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be controlled remotely from an MTX/MRX series processor via Ethernet cable.

EXo8

EXo8

EXo8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX/MRX series processors via YDIF.

Exi8/ Exo8 Specifications

  EXi8 EXo8
Sampling frequency 48kHz/44.1kH
Signal delay Less than 2.5ms
Total harmonic distortion Less than 0.05% (+4dBu , Gain:-6dB); less than 0.1% (+4dBu , Gain:+66dB)
Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max
Dynamic range 107dB (Gain:-6dB)
Equivalent input noise (EIN) -126dBu (Gain: +66dB)
Phantom power +48V (per channel; individually settable)
Crosstalk -100dB (@1kHz)
Heat dissipation (per hour) 21.5 kcal max.
Power supply voltage 100V 50/60Hz
Power consumption 25 W max.
Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U
Included items Power cord, Euroblock plugs (3-pin, tabbed) x8

EXi8 Analog Input Specifications

Input terminal GAIN Actual load
impedance
For use with
nominal
Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics
& 600ΩLines
-62dBu -42dBu Euroblock
-6dB +10dBu +30dBu

EXi8 Digital Input Specifications

Terminal Format Level IN/OUT Connector
YDIF In YDIF RS-422 16IN RJ45

EXo8 Analog Output Specifications

Output terminal Actual Source
impedance
For use with
nominal
Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩLines +4dBu +24dBu Euroblock

EXo8 Digital Output Specifications

Terminal Format Level IN/OUT Connector
YDIF Out YDIF RS-422 16OUT RJ45

Exi8 / Exo8 Control I/O Specifications

Terminal Format Level Connector
Network  Ethernet 100Base-TX - RJ-45

Return to Top

ProVisionaire Control

This Windows software based control and display interface creation tool for customized remote control. It allows you to control a wide range of Yamaha PA equipment such as MTX/MRX, XMV, CL/QL/TF and so on.

ProVisionaire Touch

This iPad control and display interface creation tool for customized remote control of Yamaha PA equipment such as MTX/MRX, XMV, TF-RACK and so on.

Wireless DCP

Wireless DCP is an application for Android and Apple iOS devices that provides remote control of Yamaha MTX series Matrix Processors and Yamaha Siginal Processor MRX7-D.

Mini-YGDAI Card Matching

Check Mini-YGDAI Card and host compatibility.