MTX Series

MTX3 Matrix Processor

26 x 8 Matrix Mixer / Signal Processor

  • 8ch mic/line input and 8ch analog output
  • 16ch YDIF digital I/O
  • SD Card Slot for playback

MTX5-D Matrix Processor

34 x 16 Matrix Mixer / Signal Processor

  • 8ch mic/line input and 8ch analog output
  • 16ch YDIF digital I/O
  • 16ch Dante digital I/O
  • 1x MY Card slot
  • SD Card Slot for playback

EXi8 Input Expander

EXi8 input expanders convert analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be controlled remotely from MTX/MRX series processor via Ethernet cable.

EXo8 Output Expander

EXo8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX/MRX series processors via YDIF.

DCP1V4S Digital Control Panel

1 Volume & 4 Switch equipped Wall Mount Control panel for MTX SeriesEasy connection by CAT5 carrying RS485 + powerMaximum 8 DCPs can be connected to 1 MTX Series

DCP4S Digital Control Panel

4 Switch equipped Wall Mounut Control panel for MTX SeriesEasy connection by CAT5 carrying RS485 + powerMaximum 8 DCPs can be connected to 1 MTX Series

DCP4V4S Digital Control Panel

4 Volume & 4 Switch equipped Wall Mounut Control panel for MTX SeriesEasy connection by CAT5 carrying RS485 + powerMaximum 8 DCPs can be connected to 1 MTX Series

DCH8 Digital Controller Hub

Divides the control line from host devices such as the Yamaha DME7 and MTX/MRX series into up to 8 lines.

PGM1 Paging Station Microphone

The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.

  • Dante network support
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 4 units can be connected per system
  • PoE powered
  • Dimensions: 132(W) Ă— 56(H) Ă— 154(D) mm (excluding mic)
  • Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)

PGX1 Paging Station Extension

The PGX1 is a paging station extension that can be used with the PGM1.

  • Function expansion for the PGM1
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 2 units can be connected to each PGM1
  • Dimensions: 132(W) Ă— 56(H) Ă— 154(D) mm
  • Weight: 0.9 kg (excluding connecting bracket)

MCP1

Wall-Mount Controller

  • 6 buttons can be assigned to perform control functions (via ProVisionaire Design or MTX-MRX Editor)
  • Multi-language displays supported
  • Four user levels for access management
  • Up to 16 units can be connected per system
  • PoE powered
  • Back can adapter supplied
  • Dimensions: 149(W) x 125(H) x 18(D) mm
  • Weight: 0.5 kg

SWR2100P-10G L2 Switch

The SWR2100P series network switch equipped with ten RJ45 ports.

  • Ports available for PoE power supply: 1-9 / Up link port: 9 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2100P-5G L2 Switch

The SWR2100P series network switch equipped with five RJ45 ports.

  • Ports available for PoE power supply: 1-4 / Up link port: 5 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2311P-10G L2 Switch

Recommended settings for stable operation of a Dante network (such as QoS, EEE, and IGMP Snooping) can be made easily

  • LAN ports equipped with PoE supply: 8(1-8)
  • LAN/SFP combo ports: 2(9, 10) (The LAN port and SFP slot are exclusively used)
  • PoE supply is compliant with IEEE 802.3at, and can supply up to 30W to all PoE ports
  • In-build RADIUS server for advanced security management