Imprimer cette page

[Notice]

1. You can change the channel labels but not a part of the device labels. Because they are used for the device identification of CL series. For details, please refer to this fig.

2. Please do not use the EEE function (*) of network switches in a Dante network.
Although power management should be negotiated automatically in switches that support EEE, some switches do not perform the negotiation properly. This may cause EEE to be enabled in Dante networks when it is not appropriate, resulting in poor synchronization performance and occasional dropouts.
Therefore we strongly recommend that:

1. If you use managed switches, ensure that they allow EEE to be disabled. Make sure that EEE is disabled on all ports used for real-time Dante traffic.
2. If you use unmanaged switches, make sure to not use network switches that support the EEE function, since EEE operation cannot be disabled in these switches.
* EEE (Energy Efficient Ethernet) is a technology that reduces switch power consumption during periods of low network traffic. It is also known as Green Ethernet and IEEE802.3az.

3. Be sure to use the switches with IGMP Snooping V3 enabled when audio data is transmitted in multicast flows.
Unicast is used by default (recommended). Only use multicast when it is necessary, and keep the number of multicast flows to a minimum.


Firmware et Logiciel

Name Description OS Last Update
CL5 Firmware V4.50 - Feb. 19, 2018
CL3 Firmware V4.50 - Feb. 19, 2018
CL1 Firmware V4.50 - Feb. 19, 2018
CL Editor V4.5.0 for Win 10/8.1/7 Win Feb. 19, 2018
CL Editor V4.5.0 for Mac macOS 10.13-OS X 10.9 Mac Feb. 19, 2018
Dante Virtual Soundcard -
Console File Converter V4.0.0 for Win 10/8.1/7 Win Aug. 1, 2017
Console File Converter V4.0.0 for Mac macOS 10.13-OS X 10.9 Mac Aug. 1, 2017
CL StageMix for iPad -
CL Series Help File - Mar. 1, 2017
Yamaha Console Extension V2.0.0-2 for Mac Required for use with Nuendo Live. Also works with QL Series. Mac Apr. 27, 2016
Yamaha Console Extension V2.0.0 for Win8.1/8/7(64-bit) Required for use with Nuendo Live. Also works with QL Series. Win Jul. 15, 2014
Yamaha Console Extension V2.0.0 for Win8.1/8/7(32-bit) Required for use with Nuendo Live. Also works with QL Series. Win Jul. 10, 2014
Name Description OS Last Update
ProVisionaire Control V1.0.0 for Win 10/8.1/7 Win Jan. 22, 2018
ProVisionaire Control KIOSK V1.0.0 for Win 10/8.1/7 Win Jan. 22, 2018

Advice for using StageMix on iOS 10

[ 1 ]

Since the release of iOS 10, your iPad may try to access the Internet at the time of selecting a Wi-Fi Network. Depending on the set-up or model of your Wi-Fi device (Router or Access Point), the message of "cannot connect with the Internet" may appear on your iPad screen and StageMix will be unable to connect with a console.
Internet access is unnecessary for the connection between StageMix and console, so should you experience this you can prevent this message from appearing by disabling "Redirect Function for Internet connection" of your Wi-Fi device. Please ask the Wi-Fi device manufacturer about the way to disable "Redirect Function for Internet connection".

[ 2 ]

With iOS 10 you may experience Wi-Fi connection difficulties which can result in StageMix repeatedly losing sync with the console. Should you encounter this problem, please use either of the following procedures in order to maintain a stable Wi-Fi connection.

[Solution 1: If using a static IP address setting on the iPad.]

1. Open "Settings" application on the iPad.
2. Select Wi-Fi.
3. Tap [ >] of Wi-Fi Network you are using.
4. Tap [ Router ] and enter the IP address of the Router or Access Point.
(IP address is usually printed on the bottom of the device.)
5. Tap [ DNS ] and enter the same IP address as used in the above step 4
6. Close "Network Settings"
7. Launch StageMix and connect it to a console.

* Please note that the DNS address entered in the above step 5 must be set as required if using your iPad to connect to the Internet via the same WiFi device. Please ask your Network Administrator for assistance.

[Solution 2: If using the DHCP setting on the iPad.]

Should your Router or Access Point feature a DHCP server, it can be set-up accordingly. If not, use solution 1.

( Wi-Fi device settings )
1. Login to your Wi-Fi device using a web browser etc. and enter the set-up page.
2. Enable the DHCP server function in the setting page of step 1.
3. Set the upper and lower limits of the IP addresses the DHCP server can assign.
Ensure your console's IP address is outside this range, or reserve its IP address.
4. Set the Subnet Mask to the same value as the console.
5. Set the Router (Gateway) and DNS address if necessary.
6. Store the changes to apply.
7. Re-boot your Wi-Fi device if necessary.

( iPad settings )
8. Open "Settings" application on your iPad.
9. Select Wi-Fi.
10. Tap [ >] of Wi-Fi Network you are using.
11. Select [DHCP] under IP address. The iPad will receive the necessary DHCP data from the Wi-Fi device. Tap [Renew Lease] if it does not.
12. Double check that there is no IP address conflict between the console and iPad
13. Double check the iPad has received correct data for the Router and DNS address.
14. Launch StageMix and connect it to the console.

Cette FAQ vous a-t-elle aide ?

EQ Preset

EQ Presets for Ultimate Ears In-ear Monitors

EQ presets for the Ultimate Ears UERM, UE11, UE18, UE4, UE5, UE7, and UE900 in-ear monitors. [Download]

Documentation/Catalogue

CL Series
[EN] [JA]

CL/QL V3 & RMio64-D
[EN] [JA]

CL/QL V3 (for iPad, iBooks format)
[EN] [JA]

CL QL V4 Leaflet
[EN]

Wallpaper

Manuels

Name FR EN
CL Editor Installation Guide [470KB] [458KB]
CL Editor Owner's Manual [16.MB] [7.7MB]
CL Series Reference Manual [44.6MB] -
CL StageMix V5 User Guide [2.52MB] [3.13MB]
CL StageMix V5.1 User Guide [2.76MB] [2.42MB]
CL StageMix V6 User Guide [4.27MB] [3.58MB]
CL StageMix V7 User Guide [4.79MB] [3.76MB]
CL/QL Series & CL/QL Editor V4.1 Supplementary Manual [6.24MB] [3.15MB]
CL/QL Series & CL/QL Editor V4.5 Supplementary Manual [229KB] [224KB]
CL5/CL3/CL1 Update Guide - [593KB]
CL5/CL3/CL1 V1.5 Owner's Manual [18.7MB] [8.61MB]
CL5/CL3/CL1 V1.5 Reference Manual [46.7MB] [10.1MB]
CL5/CL3/CL1 V1.7 Supplementary Manual [4.34MB] [896KB]
CL5/CL3/CL1 V2.0 Supplementary Manual [720KB] [687KB]
CL5/CL3/CL1 V3.0 Owner's Manual [8.59MB] [8.46MB]
CL5/CL3/CL1 V3.0 Reference Manual [12.3MB] [13.1MB]
CL5/CL3/CL1 V3.1 Supplementary Manual [1.43MB] [1.33MB]
CL5/CL3/CL1 V4.0 Owner's Manual [17.0MB] [6.48MB]
CL5/CL3/CL1 V4.0 Reference Manual [13.2MB] [12.8MB]
Console File Converter User Guide - [753KB]
Dante Controller V3.5.x User Guide - [2.18MB]
Dante-MY16-AUD & R Series HA Remote Control Guide - [961KB]
MBCL Owner's Manual - [1.89MB]
MonitorMix User Guide [567KB] [561KB]
ProVisionaire Control Setup Guide - [1.08MB]
ProVisionaire Touch Setup Guide - [3.96MB]
R Remote V2 User's Guide - [789KB]
R Remote V3 User's Guide - [1.41MB]
R Remote V4.1 User's Guide - [1.57MB]
R Remote V4.5 User's Guide - [2.0MB]
R Series/Tio1608-D Firmware Update Guide (R series:V4.10 or lator) - [119KB]
RMio64-D Firmware Update Guide - [532KB]
RMio64-D Owner's Manual [3.94MB] [3.81MB]
RSio64-D Firmware Update Guide (V4.04 or older) - [636KB]
RSio64-D Owner's Manual [7.77MB] [2.19MB]
Ri8-D/Ro8-D Firmware Update Guide (V4.04 or older) - [839KB]
Ri8-D/Ro8-D Owner's Manual [4.46MB] [4.38MB]
Rio3224-D/Rio1608-D Owner's Manual [7.15MB] [5.1MB]
Rio3224-D/Rio1608-D Update Guide (V4.04 or older) - [847KB]
Rio3224-D2/Rio1608-D2 Owner's Manual [5.17MB] [5.1MB]
Specification additions/changes for CL5/CL3/CL1 V1.02 - [254KB]
Yamaha Console Extension Installation Guide - [49.9KB]

Ressources pour Conception Systeme

Retour en haut

CL/QL Series V4.1

CL/QL Version 4.1 supports AES67, additional Shure wireless receivers, and more!

Yamaha Design "Synapses"

Yamaha Design site "Synapses" describes connections between products and concept keywords.

Exemple d'installation

Créé en 2003, Hir TV fut la première chaîne de télévision « tout info » en Hongrie. Elle est toujours numéro un dans le domaine. Lors d’une rénovation récente de ses installations techniques, une configuration basée sur des consoles Yamaha CL a été mis en place. Elle assure une souplesse et un rapport coût/efficacité exceptionnels.

  • Exemple d'installation

Exemple d'installation

Après avoir convaincu nombre d’ingénieurs du son en spectacle vivant, les consoles numériques Yamaha de la Série CL sont de plus en plus adoptées dans le secteur Broadcast en Europe. C’est ainsi qu’une CL5 est désormais utilisée sur le talk-show le plus ancien de la télévision allemande, 3nach9.

  • Exemple d'installation