Print This Page

01V96V2 Firmware V2.42 for Mac (Previous version)

Important Notice

  • This firmware is only for use on the 01V96 V2. It should not be installed on the 01V96VCM.
    If installed on the 01V96VCM this firmware will render the pre-installed VCM effects unusable.
    If you have erroneously installed this firmware on the 01V96VCM, proper operation can be restored by reinstalling the correct firmware for that model.

01V96 Editor/Firmware Compatibility (Mac)

01V96V2 Editor Studio Manager V2 Host 01V96 Firmware
2.2.2 2.3.3, 2.3.2 2.42, 2.41, 2.40 2.42, 2.40, 2.30, 2.24, 2.23,
2.2.1 2.3.1
2.2.0 2.3.0, 2.2.1, 2.2.0
2.1.3 2.1.8
2.1.2 2.1.8, 2.1.6, 2.1.5 - 2.22, 2.21, 2.20
2.1.1 2.1.5, 2.1.4, 2.1.3 - 2.05, 2.04, 2.03, 2.02, 2.01, 2.00
2.0.0 2.0.0 -

Fixed Bugs

  • Fixed a problem in which the phase between the odd and even channels of the MY8-ADDA96 input signal might occasionally shift by one sample when changing the wordclock settings.
    *Set the sliding switch of the MY8-ADDA96 card to the "AE96" position.
  • Fixed a problem which occurred when using a MY16-AE or MY16-TD card, in which the data transfer format was returned to the default value (Double Channel mode) when the workclock settings were changed, even if the mode was properly changed from Double Channel to a different mode in the DIO|FORMAT page.

System Requirements

OS Mac OS X 10.4.1/ 10.5.x/ 10.6.x
CPU Mac G3/233MHz or higher, or Intel processor
Memory 16MB or more
HDD 10 MB or more
Display 1024 x 768 pixels, 32,000 colors or more
Other USB port

License agreement and software

01V96V2 Firmware V2.42 for Mac (Previous version)

You also need to download these files.

You are recommended to download these files.

Return to Top