Print This Page

AG DSP Controller V1.1.0.0 for Win 10/8.1/8/7(SP1)

Important Notice

  • The "Yamaha Steinberg USB Driver" is required for using AG DSP Controller. If the driver has not been installed yet, you can download from here.
  • You can reset the AG06/03 to factory default setting by following procedure.
    A. By using AG DSP Controller
    1. Connect the AG06/03 directly to the computer by using a USB cable, and turn on the AG06/03
    2. Start AG DSP Controller on the computer
    3. Press "EXPERT" button to go to Expert mode
    4. Select "DEFAULT" from LOAD Menu
    B. By using only the AG06/03
    1. Connect the AG06/03 directly to the computer by using a USB cable
    2. Turn on the AG06/03 while pressing and holding down the "COMP/EQ" button.

Main Revisions and Enhancements

V1.0.1.0->1.1.0.0

Improvements

  • When the edit box of the parameter is clicked, the edit box changes to overwritten selected state.

Fixed bugs

  • Fixed a problem in which ON/OFF settings changed with the [COMP/EQ], [AMP SIM] and [EFFECT] buttons (by operating the buttons on the AG unit itself) would not be saved after exiting from the AG DSP Controller.
  • Fixed a problem in which the GR meter of COMP is in motion when the effect is started.
  • Fixed a problem in which the EQ graph is shown as flat under certain conditions.
  • Fixed a problem in which EQ parameters are not overwritten even if the Save operation was carried out when EQ was OFF.

System Requirements

OS Windows 10/8.1/8 Windows 7(SP1)
CPU Intel or AMD dual core CPU
Memory 1GB or more
HDD 100MB or more
Display 1280 x 800px or more
  • We are currently testing the compatibility of AG DSP Controller with Windows 10 operating system.

License agreement and software

AG DSP Controller V1.1.0.0 for Win 10/8.1/8/7(SP1)

Upgrade Instruction

Return to Top