Print This Page

DM1000VCM Firmware V2.41-2 for Mac

Important Notice

  • You cannot double-click to open this firmware updater because of a specification change of Gatekeeper on Mac OS X 10.9.5. In that case, control-click the firmware updater icon in Finder, and select "Open" from the top of the contextual menu that appears. Once you open it, you can double-click to open it after that.
  • This firmware is only for use on the DM1000VCM.
    It should not be installed on the DM1000 V2. If installed on the DM1000 V2 a "Please Grant Authority" message will appear and the system will not start because a different firmware license applies. If you have erroneously installed this firmware on the DM1000 V2, proper operation can be restored by reinstalling the correct firmware for that model.

DM1000 Editor/Firmware Compatibility (Mac)

DM1000V2 Editor Studio Manager V2 Host DM1000 Firmware
VCM V2
2.2.2 2.3.5, 2.3.4, 2.3.3, 2.3.2 2.41, 2.40 2.41, 2.40, 2.30, 2.24, 2.23
2.2.1 2.3.1
2.2.0 2.3.0,
2.2.1, 2.2.0
2.1.3 2.1.8
2.1.2 2.1.8, 2.1.6, 2.1.5 - 2.22, 2.21, 2.20
2.1.1 2.1.5, 2.1.4, 2.1.3 - 2.05, 2.04, 2.03, 2.02, 2.01, 2.00
2.0.0 2.0.0 -

Main Revisions and Enhancements

New Feature

  • Now supports Mac OS X 10.10.

Fixed Bugs

  • Fixed a problem in which the phase between the odd and even channels of the MY8-ADDA96 input signal might occasionally shift by one sample when changing the wordclock settings.

    *Set the sliding switch of the MY8-ADDA96 card to the "AE96" position.
  • Fixed a problem which occurred when using a MY16-AE or MY16-TD card, in which the data transfer format was returned to the default value (Double Channel mode) when the workclock settings were changed, even if the mode was properly changed from Double Channel to a different mode in the DIO|FORMAT page.

System Requirements

OS Mac OS X 10.6.x/ 10.7.x/ 10.8.x/ 10.9.x/ 10.10.x
CPU Mac G3/233MHz or higher, or Intel processor
Memory 16MB or more
HDD 10 MB or more
Display 1024 x 768 pixels, 32,000 colors or more
Other USB port

former version information.

DM1000VCM Firmware V2.40 for Win/Mac OSX

Fixed Bug
  • Fixed a problem that when the DM1000 was used with an MY8-AE96(S) inserted to the slot and a certain channel input signal was unlocked or failed in synchronization, noise was generated to another channel input signal.

License agreement and software

DM1000VCM Firmware V2.41-2 for Mac

You also need to download these files.

You are recommended to download these files.

Return to Top