Print This Page

DM1000VCM Firmware V2.41 for Win

Important Notice

  • This firmware is only for use on the DM1000VCM.
    It should not be installed on the DM1000 V2. If installed on the DM1000 V2 a "Please Grant Authority" message will appear and the system will not start because a different firmware license applies. If you have erroneously installed this firmware on the DM1000 V2, proper operation can be restored by reinstalling the correct firmware for that model.

DM1000 Editor/Firmware Compatibility (Win)

DM1000V2 EditorStudio Manager V2 HostDM1000 Firmware
VCMV2
2.2.12.3.12.41, 2.402.41, 2.40, 2.30, 2.24, 2.23
2.1.32.3.0, 2.1.7
2.1.22.1.7, 2.1.6, 2.1.5-2.22, 2.21, 2.20
2.1.12.1.5, 2.1.4, 2.1.3-2.05, 2.04, 2.03, 2.02, 2.01, 2.00
2.1.02.1.0-
2.0.02.0.0-

Fixed Bug

  • Fixed a problem in which the phase between the odd and even channels of the MY8-ADDA96 input signal might occasionally shift by one sample when changing the wordclock settings.
    *Set the sliding switch of the MY8-ADDA96 card to the "AE96" position.
  • Fixed a problem which occurred when using a MY16-AE or MY16-TD card, in which the data transfer format was returned to the default value (Double Channel mode) when the workclock settings were changed, even if the mode was properly changed from Double Channel to a different mode in the DIO|FORMAT page.

System Requirements

OSWindows 7 (32-bit)Windows Vista (32-bit)Windows XPWindows 2000
CPU1.4GHz or higher Intel Core/Pentium/Celeron family processorIntel Pentium/Celeron 433MHz or faster
Memory1GB or more128MB or more
HDD30 MB or more10MB or more
Display1024 x 768 pixels or higher; High Color 16-bit or higher
OtherUSB port

License agreement and software

DM1000VCM Firmware V2.41 for Win

You also need to download these files.

Upgrade Instruction

You are recommended to download these files.

Return to Top