Print This Page

DME-N and ICP1 firmware V3.04 for Win (Previous version)

Important Notice

</span> <ul class="normal"> <li>The hardware specification for DME Firmware V3.5x or earlier differs from the one for Firmware V3.8x or later. Therefore firmware V3.5x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.5x or earlier. (This does not apply to the SP2060 or ICP1.)<br /> If you need to upgrade your DME from V3.55 or earlier to V3.81 or later, please contact your Yamaha dealer.</li> <li>Save an up-to-date DME project file (*.daf). Don't update unless an up-to-date &quote;.daf&quote; file has already been saved on your computer. Without the &quote;.daf&quote; file, you will not be able to restore DME operation.</li> <li>When DME64N/24N units running firmware version 3.5x or earlier and DME64N/24N or DME Satellite units running firmware versions 3.81 or later are combined in the same device group, DME64N/24N units running firmware version 3.5x or earlier cannot be designated as the group master.</li> </ul> <h3 class="headingD01">DME Designer/Firmware compatibility</h3> <div class="tableA01"> <table> <thead> <tr><th>DME Designer Version</th><th colspan="3">Firmware Version</th></tr> <tr><td>&nbsp;</td><td>DME-N, ICP1</td><td>DME Satellite</td><td>SP2060</td></tr> </thead> <tbody> <tr> <td>3.8.0</td><td>3.82, 3.81, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01</td> <td>3.82, 3.81, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01</td> <td>1.31, 1.30, 1.24, 1.23, 1.22, 1.21</td> </tr> <tr> <td>3.5.1, 3.0.2, 3.0.1, 3.0.0</td> <td>3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01</td> <td>3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01</td> <td>1.31, 1.30, 1.24, 1.23, 1.22, 1.21</td> </tr> </tbody> </table> <p>* If the Program Ducker component is used, both DME firmware and DME Designer versions must be V3.5x or greater.</p> </div> <span>

New Feature

  • The internal head amps of the DME64N/24N (with an AVY16-ES card) can now be controlled directly through the slot via EtherSound without using the REMOTE terminal.
    To use this function, from the AVS-ESMonitor application set Serial Port Mode to Internal Slot Port <-> EtherSound and Baud Rate to 38400. Please note that on the DME64N you can only use slot 3 and 4.

Fixed Bugs

  • When Utility or Network settings are changed from DME Designer, the device display now shows a message indicating that the settings are being stored as well (for the DME Satellite the [SIGNAL] indicators light consecutively in a clockwise direction).Do not turn the power off while the settings are being stored; doing so may damage the data.
  • Fixed a problem that when the DME64N/24N was used with an MY8-AE96(S) inserted to the slot and a certain channel input signal was unlocked or failed in synchronization, noise was generated to another channel input signal.

License agreement and software

DME-N and ICP1 firmware V3.04 for Win (Previous version)

You also need to download these files.

Return to Top