Print This Page

DME-N and ICP1 firmware V3.06 for Win (Previous version)

Important Notice

</span> <ul class="normal"> <li>The hardware specification for DME Firmware V3.5x or earlier differs from the one for Firmware V3.8x or later. Therefore firmware V3.5x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.5x or earlier. (This does not apply to the SP2060 or ICP1.)<br /> If you need to upgrade your DME from V3.55 or earlier to V3.81 or later, please contact your Yamaha dealer.</li> <li>Save an up-to-date DME project file (*.daf). Don't update unless an up-to-date &quote;.daf&quote; file has already been saved on your computer. Without the &quote;.daf&quote; file, you will not be able to restore DME operation.</li> <li>When DME64N/24N units running firmware version 3.5x or earlier and DME64N/24N or DME Satellite units running firmware versions 3.81 or later are combined in the same device group, DME64N/24N units running firmware version 3.5x or earlier cannot be designated as the group master.</li> </ul> <h3 class="headingD01">DME Designer/Firmware compatibility</h3> <div class="tableA01"> <table> <thead> <tr><th>DME Designer Version</th><th colspan="3">Firmware Version</th></tr> <tr><td>&nbsp;</td><td>DME-N, ICP1</td><td>DME Satellite</td><td>SP2060</td></tr> </thead> <tbody> <tr> <td>3.8.0</td><td>3.82, 3.81, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01</td> <td>3.82, 3.81, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01</td> <td>1.31, 1.30, 1.24, 1.23, 1.22, 1.21</td> </tr> <tr> <td>3.5.1, 3.0.2, 3.0.1, 3.0.0</td> <td>3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01</td> <td>3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01</td> <td>1.31, 1.30, 1.24, 1.23, 1.22, 1.21</td> </tr> </tbody> </table> <p>* If the Program Ducker component is used, both DME firmware and DME Designer versions must be V3.5x or greater.</p> </div> <span>

Fixed Bugs

  • Fixed a problem in which the Wav file registered on the Wav File Manager list 001 could not be played back after the DME was restarted.
  • Fixed a problem in which the DME would freeze when the Room Combiner component parameters were changed from an external device (remote control, MIDI, or GPI).
  • The response speed has been improved for assigned parameters to be changed once the DME receives a trigger signal via the GPI IN connector.

License agreement and software

DME-N and ICP1 firmware V3.06 for Win (Previous version)

You also need to download these files.

Return to Top