Print This Page

DME Series Firmware V4.06

Important Notice

  • The hardware specification for DME Firmware V3.6x or earlier differs from the one for Firmware V3.8x or later (including V4.0). Therefore firmware V3.6x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.6x or earlier. (This does not apply to the SP2060 or ICP1.) If you need to upgrade your DME from V3.6x or earlier to V3.81 or later (including V4.0), please contact your Yamaha dealer.
  • It is needless to change the DME hardware when you need to upgrade/downgrade between V3.8x and V4.00 or later. Please download the required firmware version from our download page and update your DME by using DME Designer.
  • Save an up-to-date DME project file (*.daf). Don't update unless an up-to-date ".daf" file has already been saved on your computer. Without the ".daf" file, you will not be able to restore DME operation.
  • DME Designer V4 cannot design/control the system that consists of DME Firmware V3 units or the mixed system with Firmware V3 and V4 units. It is required to unify the system version to V3 or V4 by upgrading/downgrading DME Designer or firmware.
  • It is necessary to update DME firmware to V4.05 or later in order to connect with a Windows 10 PC that has DME Designer installed. If it is connected with a DME that has firmware Ver.4.00 – 4.04 installed, the DME Designer will not operate normally.

DME Designer/Firmware compatibility

DME Designer Version Firmware Version
  DME-N, ICP1 DME Satellite SP2060
4.0.1, 4.0.0 4.06, 4.05, 4.04, 4.03, 4.02, 4.01, 4.00 4.06, 4.05, 4.04, 4.03, 4.02, 4.01, 4.00 1.33, 1.32, 1.31, 1.30, 1.24, 1.23, 1.22, 1.21

* DME Series firmware V4.05 or later is needed for DME to connect to a Windows 10 PC that is installed with DME Designer.

Main Revisions and Enhancements

Fixed bug

  • (DME-N only) Fixed a problem in which, when using Dante-MY16-AUD / Dante-MY16-AUD2 Mini-YGDAI cards, even-numbered channels would not be transmitted or received after changing Dante wordclock settings from 96KHz to 48KHz and back to 96KHz.

License agreement and software

DME Series Firmware V4.06

You also need to download these files.

You are recommended to download these files.

Return to Top