Print This Page

DME Satellite firmware V3.11 for Win (Previous version)

Important Notice

  • The hardware specification for DME Firmware V3.5x or earlier differs from the one for Firmware V3.8x or later. Therefore firmware V3.5x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.5x or earlier. (This does not apply to the SP2060 or ICP1.)
    If you need to upgrade your DME from V3.55 or earlier to V3.81 or later, please contact your Yamaha dealer.
  • Save an up-to-date DME project file (*.daf). Don't update unless an up-to-date &quote;.daf&quote; file has already been saved on your computer. Without the &quote;.daf&quote; file, you will not be able to restore DME operation.
  • When DME64N/24N units running firmware version 3.5x or earlier and DME64N/24N or DME Satellite units running firmware versions 3.81 or later are combined in the same device group, DME64N/24N units running firmware version 3.5x or earlier cannot be designated as the group master.

DME Designer/Firmware compatibility

DME Designer Version Firmware Version
  DME-N, ICP1 DME Satellite SP2060
3.8.0 3.82, 3.81, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01 3.82, 3.81, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01 1.31, 1.30, 1.24, 1.23, 1.22, 1.21
3.5.1, 3.0.2, 3.0.1, 3.0.0 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01 1.31, 1.30, 1.24, 1.23, 1.22, 1.21

* If the Program Ducker component is used, both DME firmware and DME Designer versions must be V3.5x or greater.

New Features

  • The following two commands have been added to the Remote Control Protocol.
    GMUT: Obtaining mute condition
    SWF: Stopping playback of a file in the WAV File Player
    Refer to the DME Remote Control Protocol Specifications V3.1 for detailed information on the commands.

Fixed Bugs

  • The message "Scene Recalling. Do not turn off!" is now displayed (the DME Satellite lights the front panel [SIGNAL] indicators consecutively in a clockwise direction.) until internal processing has been thoroughly completed to be ready to turn off the power when a scene is recalled. Never attempt to turn off the power until the message disappears.
  • Fixed a problem in which audio was sometimes cut off when communication was broken between the group master and the slave.
  • (DME64N/DME24N only) Fixed a problem in which characters in the Info page of the UTILITY screen were occasionally not displayed correctly when using Japanese characters.
  • (DME Satellite only) Fixed a problem in which it seemed as if the second and subsequent remote controllers could be connected, when remotely controlling the DME Satellite via Ethernet.
  • Fixed a problem in which the Delay Time parameters and some Gain parameters could not be occasionally controlled remotely from the external devices.

Precautions for updating the DME Satellite

  • If the DME Satellite firmware is updated from versions V3.09 or earlier to V3.10 or later, the internal device updates will be run for about 30 seconds immediately after the first restart. Never attempt to turn off the power while any four (4) [SIGNAL] indicators out of eight (8) at the front panel are alternately flashing in process of updating.

License agreement and software

DME Satellite firmware V3.11 for Win (Previous version)

You also need to download these files.

You are recommended to download these files.

Return to Top