Print This Page

DSP5D Firmware V1.25 (Previous version)

Important Notice

  • Use the Editor with the supported firmware listed in the following table.
  • Do not connect any EtherSound devices and software other than AVRed-ES to the DSP5D system. You can use the AVS-ESMonitor software to set up the AVRed-ES, but be sure to physically disconnect the PC on which the ESMonitor is installed before enabling cascade connection.

PM5DV2&DSP5D Editor/Firmware Compatibility (Win)

PM5D V2 Editor DSP5D Editor Studio Manager V2 Host PM5D V2 Firmware DSP5D Firmware
2.2.5 2.3.1, 2.3.0 2.26 1.26
2.25 1.25
2.2.4, 2.2.3 2.23 1.23
2.2.2 2.1.7 2.22 1.22
2.2.0 2.20 1.20
2.1.1 2.11 1.11
2.1.0 2.06, 2.05 1.05

PM5DV2&DSP5D Editor/Firmware Compatibility (Mac)

PM5D V2 Editor DSP5D Editor Studio Manager V2 Host PM5D V2 Firmware DSP5D Firmware
2.2.6 2.3.5, 2.3.4 2.26 1.26
2.25 1.25
  • PM5D/DSP5D user data is compatible with later firmware versions, but not with lower firmware versions. Cross-platform compatibility is provided for setup data which is directly saved to a compact flash memory via the PM5DV2, or saved as a ".PM5" file using the Editor
  • The DSP5D Editor cannot go online during DSP5D startup.
  • Communication with the Editor automatically goes offline while the DSP5D is loading a file or synchronizing for cascade connection. Synchronize the Editor with the DSP5D after the process is completed.
  • The following operations cannot be performed on the editor when cascade connection is enabled,
    - Scene and library edting (copy, move, undo, clear, or store).
    - "PC to Console" synchronization (DSP5D).

Main Revisions and Enhancements

Fixed Bugs

  • Fixed a problem in which the meters of the channels other than the currently selected channel and the adjacent channels did not move when the PM5D and the DSP5D units were cascade-connected and the DSP5D was selected for the PM5D panel operation under the following conditions.
    - The same metering point was specified for the channel strip meters and for the meters at the top of the top panel.
    - The meter of a different layer was displayed on the channel strip meters and the meters at the top of the top panel.
    - A specific screen such as EQ or COMP was displayed.
  • Fixed a problem in which the GR indicator of the channel that uses no COMP/GATE function flashed instantaneously by switching the channel layers with a screen other than COMP or GATE screen displayed, when the PM5D and the DSP5D units were cascade-connected and the DSP5D was selected for the PM5D panel operation.
  • Fixed a problem in which the GR meter continued to display the maximum value on the panel or screen of the selected channel and its paired channel when the PM5D and the DSP5D units were cascade-connected and the DSP5D was selected for the PM5D panel operation under the following conditions. To fix this problem, update the DSP5D firmware as well as the PM5D firmware.
    - VERTICAL PAIR was selected for the PAIR MODE.
    - GATE and/or COMP of the selected and its paired channels were set to ON.
    - A different layer was selected for the INPUT channel strip meters and for the meters at the top of the top panel.

License agreement and software

DSP5D Firmware V1.25 (Previous version)

Return to Top