Print This Page

LS9 Firmware V1.30 (Previous version)

Important Notice

  • Use the Editor with the supported firmware listed in the following table.

LS9 Compatibility (Win)

LS9 Editor Studio Manager
V2 Host
LS9 Firmware
2.1.4 2.3.1 1.35, 1.33, 1.30
2.1.3 1.21, 1.20, 1.18, 1.17
2.1.2 2.3.1, 2.3.0, 2.1.7 1.16, 1.15, 1.14
2.1.1 1.13, 1.12, 1.11, 1.10
2.1.0 1.01, 1.00

LS9 Compatibility (Mac)

LS9 Editor Studio Manager
V2 Host
LS9 Firmware
2.1.4 2.3.5, 2.3.4 1.35, 1.33, 1.30
2.1.3 1.21, 1.20, 1.18, 1.17
  • Files saved using later Editor or console versions cannot be loaded into earlier versions.
  • Please note that some types of USB flash memories cannot be used for firmware updates, or cannot be accessed from the LS9 at all.

How to update the firmware

  • Before performing any firmware upgrade it is good practice to back-up console data to a USB memory device.
    1. Copy the following file to root directory of your USB memory.
    LS9Px_xx.PGM (x_xx shows the version number.)
    2. Insert your USB memory and power on.
    3. LS9 detects the file and shows the following message.
    "Start Loading? CANCEL[DEC]/OK[INC]"
    4. Then press [INC] key to start updating the firmware.
    5. Wait until completing the update. LS9 automatically restarts and becomes ready to use.
    6. Initialize LS9.

Performance Limits and Specifications

  • If the LS9 Editor does not return online, reset the Input Port/Output Port in the LS9 Editor "System Setup" dialog box, then select the ports again to return online.
  • Severe fragmentation of USB memory may stop the recording/playback function of the USB memory recorder.
  • The LS9 cannot recognize the files whose name start with a two-byte character.
  • Sorting titles too quickly using up and down arrow buttons on the TITLE LIST screen of the USB memory recorder will sometimes result in a malfunction and moving of another title.
  • While playing back an audio file using the USB memory recorder, the last part (maximum 400 ms) may not be played back.
  • The USB memory recorder cannot play back WMA Professional audio files.
  • The title list of USB memory is updated whenever USB memory is inserted or a file is added to or deleted from the SONGS folder in the YPE folder. Please note that update may take some time for a number of files.
  • If USB memory is disconnected while recording with the USB memory recorder, it will not play back properly since the file process is incomplete.
  • A bitmap file created by the user can be displayed on the CONSOLE LOCK screen with some restrictions, including that the file be uncompressed, 8/16/24/32 bit color, and 300KB or less.

Main Revisions and Enhancements

Improvements

  • Added POST ON to the selections of the insertion point of the INPUT channel, the MIX channel, the STEREO channel / MONO (C) channel, and the MATRIX channel
  • Categorization of Recall Safe parameters were revised as follows:
    - INPUT MIX SEND now includes INPUT TO MIX PRE/POST.
    - MIX TO MATRIX SEND now includes MIX TO MATRIX PRE/POST.
    - STEREO TO MATRIX SEND now includes STEREO TO MATRIX PRE/POST.
  • INPUT TO MIX PRE/POST parameter now can be linked between channels (Channel Link).

Fixed Bug

  • Increased the stability of remote control of an external head amplifier. Through this, the following conditions have been eliminated or minimized:
    - Appearance of "No Response from External HA" message.
    - Termination of communication.
    - LS9 recognized AD8HR to be AD824.
    - The actual gain amount differs from the display.
  • (LS9-32 only) Fixed a problem that would occur when an INPUT channel having GEQ etc. inserted was moved to one of the INPUT channels 33-64 (which do not have insertion points), and the original OUTPUT insert data of the destination channel would be deleted.

How to update the firmware

  • Before performing any firmware upgrade it is good practice to back-up console data to a USB memory device.

    - 1. Copy the following file to root directory of your USB memory.
    LS9Px_xx.PGM (x_xx shows the version number.)
    - 2. Insert your USB memory and power on.
    - 3. LS9 detects the file and shows the following message.
    "Start Loading? CANCEL[DEC]/OK[INC]"
    - 4. Then press [INC] key to start updating the firmware.
    - 5. Wait until completing the update. LS9 automatically restarts and becomes ready to use.
    - 6. Initialize LS9.

Performance Limits and Specifications

  • They are the same as V1.10.

License agreement and software

LS9 Firmware V1.30 (Previous version)

You are recommended to download these files.

Return to Top