Print This Page

M7CL V3 Editor V3.5.1 for Win 7/Vista/XP (Previous version)

Important Notice

  • The M7CL V3 Editor is for use with Studio Manager V2 Host and Network Driver. Be sure to use the latest versions of both the Studio Manager V2 Host and Network Driver, Both are available from this site.
  • Use the Editor with the supported firmware listed in the following table.
  • Files saved using later Editor or console versions cannot be loaded into earlier versions.

M7CL V3 Compatibility(Win)

M7CL Editor Studio Manager V2 Host M7CL Firmware EtherSound Firmware(*2)
3.5.1 2.3.1 3.52(*1) 0C18
3.51
3.5.0 3.50
3.0.4 3.04 0C16
3.0.3 3.03
3.0.0 3.02, 3.01

Fixed bugs

  • Fixed a problem in which incorrect settings of delay time and delay on/off of the ports were displayed when the MONITOR OUT L/R/C channels were assigned to the ports in the Output Port window.
  • Fixed a problem in which the Undo operation did not work when the delay time was input with numbers directly in the Output Port window.
  • Fixed a problem in which the Send Point settings could not be edited simultaneously in the Selected Channel window as an Additional View when the MATRIX channels were selected in the Selected Channel window as the Main View.

System Requirements

OS Windows 7:
Ultimate/Professional/Home Premium
Windows Vista:
Ultimate/Enterprise/Business/Home Premium/Home Basic
Windows XP:
Professional SP2 or later/Home Edition SP2 or later
CPU 32bit: 1.4GHz or higher Intel Core/Pentium/Celeron family processor;
64bit: Intel 64 compatible processor
32bit: 1.4GHz or higher Intel Core/Pentium/Celeron family processor;
64bit: Intel 64 compatible processor
800MHz or faster Intel Core/Pentium/Celeron family processor
Memory 32bit: 1GB or more;
64bit: 2GB or more
1GB or more 512MB or more
HDD 100 MB or more
Display 1024 x 768 pixels or higher; High Color 16-bit or higher
Other Pointing device such as a mouse, Ethernet (100Base-TX/10Base-T) port

License agreement and software

M7CL V3 Editor V3.5.1 for Win 7/Vista/XP (Previous version)

Return to Top