Print This Page

Dante Accelerator Driver V1.0.1 for Mac (Previous version)

Dante Accelerator Firmware/Driver Compatibility (Mac)

Firmware Driver
2.5.0 2.5.1/2.5.0
2.0.0 2.0.0
1.0.1 1.0.1
1.0.0 1.0.0

Main Revisions and Enhancements

Main Revisions and Enhancements

V1.0.0 to V1.0.1

Specification Changes

  • Disabled the Pull up/Pull down settings in OS X 10.8 which does not support Pull up/Pull down.
  • This driver does not support Dante Accelerator Firmware V1.0.0. Dante Accelerator Firmware V1.0.1 or later is required for use.

Fixed Bug

  • Solved the problem in which the audio sound would not play back properly when two audio applications were simultaneously using Dante Accelerator.

Known Issue

  • If the buffer size is set to 2048 when the audio buses in the VST Connections of Nuendo are set to less than 32 channels in OS X 10.6.8, continual noise may occur. Set the value to something other than 2048.

System Requirements

OS Mac OS 10.6.8/ 10.7.5/ 10.8.x
PC a 2009 Mac Pro or later
RAM 6GB
HDD 64M Cache (recommended) 7200rpm
PCIe SLOT x4 lane or above
*Please refer to system requirements of NUAGE

former version information.

Dante Accelerator firmware V2.0.0

Specification Changes
  • Now supports Dante Redundancy. (The secondary port became available.)
Fixed Bug
  • Solved the problem in which the Dante Accelerator for which Pull up/Pull down is set to enable does not work properly in OS X 10.8.
Known Issue
  • None.

Dante Accelerator firmware V1.0.1

Specification Changes
  • Disabled the Pull up/Pull down settings in OS X 10.8 which does not support Pull up/Pull down.
  • This firmware does not support Dante Accelerator Driver V1.0.0 for Mac. V1.0.1 or later is required for use.
Fixed Bug
  • Solved the problem in which the noise might occur when changing the Pull up/Pull down settings in Mac OS X 10.6 or 10.7.
Known Issue

To customers planning to use the card from OS X 10.6 or 10.7 to 10.8.

  • The Dante Accelerator for which Pull up/Pull down is set to enable does not work properly in OS X 10.8. Before installing, set the Pull up/Pull down setting to “None”

Dante Accelerator firmware V1.0.0

  • The initial release version.

License agreement and software

Dante Accelerator Driver V1.0.1 for Mac (Previous version)

Return to Top