Print This Page

TOOLS for NUAGE V1.5.0 for Win 8.1/8/7 (32-bit) (Previous version)

Important Notice

  • Apple Bonjour and Audinate Dante Controller must be installed for the R series remote control.
  • Please use the MAIN firmware version 1.70 or later for the R Series.
TOOLS for NUAGE V1.5.0 for Windows consists of the following programs.

  • NUAGE Workgroup Manager V1.1.1
  • NUAGE Extension V1.5.0
  • HARC Extension V1.1.0

NUAGE System Compatibility

Windows

TOOLS for NUAGE

OS
Nuendo Cubase / Cubase Pro NUAGE FADER / MASTER Firmware NUAGE I/O Firmware (16D/16A/8A8D) DANTE ACCELERATOR
MAIN MAIN DANTE Firmware Driver
1.6.0
Windows 7 SP1 / 8 /8.1 (64-bit)
6.5.30
6.0.7 (*1)
8.0.0
7.5.30
1.05 1.14
1.13
1.12
3.7.1.10 - 3.4.9.3 - 1.2.1 2.0.0 2.0.1
1.5.0
Windows 7 SP1 / 8 / 8.1 (32-bit/64-bit)
6.5.20
6.0.7 (*1)
7.0.4 later
1.2.0
Windows 7 SP1 /8 / 8.1 (32-bit/64-bit)
6.0.6 - 6.0.7 1.04
1.1.0
Windows 7 SP1 / 8 /8.1 (32-bit/64-bit)
6.0.4 - 6.0.5 1.03 1.11
1.09
3.6.4.20 - 3.4.3.8 - 1.1.3 1.0.1
1.0.0
1.0.0
1.0.0
Windows 7 SP1 / 8 / 8.1 (32-bit/64-bit)
6.0.2 - 6.0.3 7.0.2 later 1.03
1.02

*1 With Nuendo 6.0.7, only some additional features of V1.5.0 or later are available.

Macintosh

TOOLS for NUAGE

OS
Nuendo Cubase / Cubase Pro NUAGE FADER / MASTER Firmware NUAGE I/O Firmware (16D/16A/8A8D) DANTE ACCELERATOR
MAIN MAIN DANTE Firmware Driver
1.6.0
OS X 10.8.x/10.9.x/10.10.x 
6.5.30-6.5.40
6.0.7 (*3)
8.0.0-8.0.5 (*2)
7.5.30-7.5.40
1.05 1.14
1.13
1.12
3.7.1.10 - 3.4.9.3 - 1.2.1 2.5.0
2.5.1
1.5.0
OS X 10.7.5/10.8.x/10.9.x
6.5.20 (*1)
6.0.7 (*3)
7.0.4 later
2.5.0(*4)
1.2.0
OS X 10.7.5/10.8.x/10.9.x 
6.0.6 or later 1.04
2.0.0
2.0.0
1.1.0
OS X 10.7.5/10.8.x/10.9.x
6.0.4 or later 1.03 1.11
1.09
3.6.4.20 - 3.4.3.8 - 1.1.3 1.0.1 1.0.1
1.0.0(*5) 1.0.0
1.0.0
OS X 10.7.5/10.8.x/10.9.x
6.0.2 - 6.0.3 7.0.2 later 1.03
1.02
1.0.1(*5) 1.0.1
1.0.0(*5) 1.0.0

(PULL UP / PULL DOWN function is not available in Mac OS X 10.8.)
*1 Nuendo 6.5.x does not support Mac OS X 10.7.x.
*2 Cubase Pro 8 does not support Mac OS X 10.8.x.
*3 With Nuendo 6.0.7, only some additional features of V1.5.0 or later are available.
*4 Support only for Mac Pro (Late 2013) / Nuendo 6.0.7.
*5 VST System Link function is not available.

Main Revisions and Enhancements

New Functions (V1.2.0 to V1.5.0)

  • The HA gain of R series devices can now be controlled. Installation of Bonjour on your computer is required to control the R Series remotely.
  • The parameters for "Quick Controls" assigned to a channel can now be edited on the [Multi Function Display].
  • You can control VST instruments on instrument tracks on the CHANNEL CONTROL page.
  • You can now use the "track visibility control" function of Nuendo 6.5.
  • Added a super fine mode which allows for finer adjustments of the parameters on the CHANNEL STRIP.
  • Channel "Sends" can now be panned.
  • You can now control the parameters of the new Nuendo 6.5 plugin (Magneto II) and Noise Gate parameters in the SECTION CONTROL section.
  • Support has been added for the improved ADR functions in Nuendo 6.5.
  • You can now select an output for direct monitoring in NUAGE I/O Setup.

Improvements

  • If a list does not completely fit on the [Multi Function Display], you can now drag to scroll the list on the screen.
  • [CYCLE] and [●] (record) were removed from Smart Switch.
  • The SETUP page of Nuage Master is divided into three pages since the number of configurable settings has been increased.

Fixed Bugs

  • Solved a problem in which fader's value reverts to the default value when you slide the [Touch slider bar] while holding the [CTRL] button of Nuage Fader.
  • Solved a problem in which the LED and [Multi function display] did not light, when the project file was opened immediately after the first start of Nuendo.
  • Solved a problem in which the order of Nuage I/O devices added to the Workgroup was changed when NUAGE Workgroup Manager was restarted with not all of the added Nuage I/O devices being powered on.
  • Solved some other minor problems.

Known issue

  • If you name a Channel Label in Transmit tab from Dante Contoller, Direct monitoring function may not work properly.  Please keep them unchanged.

System Requirements

OS Windows 8/8.1 Windows 7 (SP1)
CPU Intel/AMD dual core processor (32-bit)
Memory 2GB or more
Interface Equipped with an Ethernet connector
Equipped with an RS-232C connector for controlling an AD8HR from the Nuage Fader. (When connecting the AD8HR to the USB connector, make sure to use a USB to Serial converter.)
HDD Free disk space of 100MB or more; high-speed hard disk

former version information.

V1.5.0

New Functions
  • The HA gain of R series devices can now be controlled. Installation of Bonjour on your computer is required to control the R Series remotely.
  • The parameters for "Quick Controls" assigned to a channel can now be edited on the [Multi Function Display].
  • You can control VST instruments on instrument tracks on the CHANNEL CONTROL page.
  • You can now use the "track visibility control" function of Nuendo 6.5.
  • Added a super fine mode which allows for finer adjustments of the parameters on the CHANNEL STRIP.
  • Channel "Sends" can now be panned.
  • You can now control the parameters of the new Nuendo 6.5 plugin (Magneto II) and Noise Gate parameters in the SECTION CONTROL section.
  • Support has been added for the improved ADR functions in Nuendo 6.5.
  • You can now select an output for direct monitoring in NUAGE I/O Setup.
Improvements
  • If a list does not completely fit on the [Multi Function Display], you can now drag to scroll the list on the screen.
  • [CYCLE] and [●] (record) were removed from Smart Switch.
  • The SETUP page of Nuage Master is divided into three pages since the number of configurable settings has been increased.

Fixed Bugs

  • Solved a problem in which fader's value reverts to the default value when you slide the [Touch slider bar] while holding the [CTRL] button of Nuage Fader.
  • Solved a problem in which the LED and [Multi function display] did not light, when the project file was opened immediately after the first start of Nuendo.
  • Solved a problem in which the order of Nuage I/O devices added to the Workgroup was changed when NUAGE Workgroup Manager was restarted with not all of the added Nuage I/O devices being powered on.
  • Solved some other minor problems.
Known issue
  • If you name a Channel Label in Transmit tab from Dante Contoller, Direct monitoring function may not work properly.  Please keep them unchanged.

V1.2.0

New Functions
  • Added support for remote operation of AD8HR remote preamp from Nuage Master.
  • Improved the EQ Band Curve display.
  • Added support for marker colors in Nuendo.
  • Improved parameter indications on the Multi Function Display.
  • Improved pan control operations from the channel strip.
Fixed Bugs
  • Solved a problem in which the cue mix monitor would be interrupted when changing the Monitor from the CONTROL ROOM section on the Nuage Master.
  • Solved a problem in which the Select Track pop-up window of the DAW A may have been displayed when DAW B or DAW C was operated by using NUMERIC PAD.
  • Solved a problem in which direct monitoring would be disabled if executing “Revert” of the Nuendo when direct monitoring is on.
  • Solved a problem in which [MOVE] would become dim if pressing and holding [ZOOM] when [MOVE] and [SELECT] on the Nuage Master are lit.
  • Solved a problem in which no plug-in effect may have been applied if the order of the effects were rearranged when the Channel Strip rack in “Mixer” on Nuendo was displayed.
  • Solved some other minor problems.

V1.1.0

New Functions
  • Added the ADR mode.
  • Added the functions for configuring the buttons in the USER ASSIGNABLE section.
  • Added support for remote operation of the AD8HR remote preamp.
  • Added the display in the [Channel name display].
  • Added display channels on the LCD.
  • Added some track select operations.
  • Added some Zoom In and Zoom Out operations.
  • Added some editing operations.
  • Added the input format when you set the Project Cursor position in the Locate function.
  • The dynamics of each channel can now be operated on the DYN page of Nuage Master.
  • Added the function for locking/unlocking “TEMPO” and “CLICK” in the MAIN page of the TRANSPORT page of Nuage Master.
  • Key input can now be executed continuously while pressing the [Input keys] in the NUMERIC PAD section of the Nuage Master.
  • Added the display of “Channel Configuration” to “Channel Information” in the upper left of the CHANNEL CONTOROL page of the Nuage Master.
  • Added the “L&R” parameter, which lets you simultaneously operate “PAN” of both left and right channels, to the PAN page of Nuage Master.
  • Changed so that only applicable channel strip types are displayed when “Show One Channel Strip Type” is selected in the “Mixer” window of Nuendo.
  • Changed the display of [Channel name display] in the Left Lock area or the Right Lock area. The other main fixes and enhancements for each program are explained below.

V1.1.0

NUAGE Workgroup Manager
  • Changed the "Check for Update" button to the "Update" button.

V1.0.0

  • 1st. Release Version.

License agreement and software

TOOLS for NUAGE V1.5.0 for Win 8.1/8/7 (32-bit) (Previous version)

Return to Top