TOOLS for NUAGE V1.7.0 for Win 8.1/8/7 (64-bit) (Previous version)
Important Notice
- Apple Bonjour and Audinate Dante Controller must be installed for the R series remote control.
- Please use the MAIN firmware version 1.70 or later for the R Series.
- We are currently testing the compatibility of TOOLS for NUAGE with Cubase Pro 8.5, Microsoft Windows 10 operating system.
TOOLS for NUAGE V1.7.0 for Windows consists of the following programs.
- NUAGE Workgroup Manager V1.2.1
- NUAGE Extension V1.7.0
- NUAGE HARC Extension V1.1.1
NUAGE System Compatibility
Windows
TOOLS
for NUAGE |
OS | Nuendo | Cubase Pro/
Cubase |
NUAGE FADER / MASTER Firmware | NUAGE I/O Firmware (16D/16A/8A8D) | DANTE ACCELERATOR | ||
---|---|---|---|---|---|---|---|---|
MAIN | MAIN | DANTE | Firmware | Driver | ||||
1.8.0
|
Windows
10 (64-bit) |
7.1.0 | 8.5.20
8.0.40 |
1.07(*2)
1.06 |
1.17
1.16 1.15 |
3.8.0.24 -
3.5.1.8 - 1.2.2 |
2.5.0 | 2.0.3
2.0.2 |
Windows
7 SP1 / 8.1 (64-bit) |
7.1.0
6.5.40 6.0.7(*1) |
8.5.20
8.0.40 7.5.40 |
||||||
1.7.1
|
Windows
10 (64-bit) |
7.0.35 | 8.5.0
8.0.35 |
|||||
Windows
7 SP1 / 8.1 (64-bit) |
7.0.35
6.5.40 6.0.7(*1) |
8.5.0
8.0.35 7.5.40 |
||||||
1.7.0
|
Windows
7 SP1 / 8 / 8.1 (64-bit) |
7.0.20
6.5.40 6.0.7(*1) |
8.0.20
7.5.40 |
2.0.2 | ||||
1.6.0
|
Windows
7 SP1 / 8 /8.1 (64-bit) |
6.5.30
6.0.7(*1) |
8.0.0
7.5.30 |
1.05 | 1.14
1.13 1.12 |
3.7.1.10 -
3.4.9.3 - 1.2.1 |
2.0.0 | 2.0.1 |
1.5.0
|
Windows
7 SP1 / 8 / 8.1 (32-bit / 64-bit) |
6.5.20
6.0.7(*1) |
7.0.4
or later |
|||||
1.2.0
|
Windows
7 SP1 / 8 / 8.1 (32-bit / 64-bit) |
6.0.6 -
6.0.7 |
1.04 | |||||
1.1.0
|
Windows
7 SP1 / 8 /8.1 (32-bit / 64-bit) |
6.0.4 -
6.0.5 |
1.03 | 1.11
1.09 |
3.6.4.20 -
3.4.3.8 - 1.1.3 |
1.0.1
1.0.0 |
1.0.0 | |
1.0.0
|
Windows
7 SP1 / 8 / 8.1 (32-bit / 64-bit) |
6.0.2 -
6.0.3 |
7.0.2
or later |
1.03
1.02 |
*1 With Nuendo 6.0.7, only some additional features of V1.5.0 or later are available.
*2 Pre-installed version.
Macintosh
TOOLS
for NUAGE |
OS | Nuendo | Cubase Pro/
Cubase |
NUAGE FADER / MASTER Firmware | NUAGE I/O Firmware (16D/16A/8A8D) | DANTE ACCELERATOR | ||
---|---|---|---|---|---|---|---|---|
MAIN | MAIN | DANTE | Firmware | Driver | ||||
1.8.0 | OS X
10.11.x |
7.1.0 |
8.5.20
|
1.07(*2)
1.06 |
1.17
1.16 1.15 |
3.8.0.24 -
3.5.1.8 - 1.2.2 |
2.5.0
|
2.5.1 |
OS X
10.10.x |
7.1.0
6.5.40 |
8.5.20
8.0.40 7.5.40 |
||||||
OS X
10.9.x |
6.5.40
6.0.7(*1) |
8.0.40
7.5.40 |
||||||
1.7.1 | OS X
10.11.x |
7.0.35 |
8.5.0
|
|||||
OS X
10.10.x |
7.0.35
6.5.40 |
8.5.0
8.0.35 7.5.40 |
||||||
OS X
10.9.x |
7.0.35
6.5.40 6.0.7(*1) |
8.0.35
7.5.40 |
||||||
1.7.0 | OS X 10.10.x | 7.0.20
6.5.40 |
8.0.20
7.5.40 |
|||||
OS X
10.9.x |
7.0.20
6.5.40 6.0.7(*1) |
|||||||
OS X
10.8.x |
6.5.40
6.0.7(*1) |
7.5.40 | ||||||
1.6.0
|
OS X
10.10.x |
6.5.30 -
6.5.40 |
8.0.0 -
8.0.5 7.5.30 - 7.5.40 |
1.05 | 1.14
1.13 1.12 |
3.7.1.10 -
3.4.9.3 - 1.2.1 |
||
OS X
10.9.x |
6.5.30 -
6.5.40 6.0.7(*1) |
|||||||
OS X
10.8.x |
7.5.30 -
7.5.40 |
|||||||
1.5.0
|
OS X
10.9.x/ 10.8.x |
6.5.20
6.0.7(*1) |
7.0.4
or later |
|||||
OS X
10.7.5 |
6.0.7(*1) | |||||||
1.2.0 | OS X
10.9.x/ 10.8.x/ 10.7.5 |
6.0.6
or later |
1.04 | 2.5.0(*3) | ||||
2.0.0 | 2.0.0 | |||||||
1.1.0
|
OS X
10.9.x/ 10.8.x/ 10.7.5 |
6.0.4
or later |
1.03 | 1.11
1.09 |
3.6.4.20 -
3.4.3.8 - 1.1.3 |
1.0.1 | 1.0.1 | |
1.0.0(*4) | 1.0.0 | |||||||
1.0.0
|
OS X
10.9.x/ 10.8.x/ 10.7.5 |
6.0.2 -
6.0.3 |
7.0.2
or later |
1.03
1.02 |
1.0.1(*4) | 1.0.1 | ||
1.0.0(*4) | 1.0.0 |
* PULL UP / PULL DOWN function is not available in Mac OS X 10.8.
*1 With Nuendo 6.0.7, only some additional features of V1.5.0 or later are available.
*2 Pre-installed version.
*3 Support only for Mac Pro (Late 2013) / Nuendo 6.0.7.
*4 VST System Link function is not available.
Main Revisions and Enhancements
Main Revisions and Enhancements (V1.6.0 to V1.7.0)
Changed the system requirements for software.New Functions
- Added channel assignment for VCA fader. (Nuendo 7 or later)
- Added assignment change for keys in SECTION CONTROL section.
- Added assignment change for keys in CHANNEL VIEW CONTROL section.
- Added a function for expanding and collapsing folder tracks.
- Added support for GPIO.
- Added setting automation mode for each track.
- Added Insert operation for control room channels.
- Added new parameters in the CONTROL ROOM page.
- Added new settings for saving project files.
- Added initializing direct monitoring settings.
Improvements
- Expanded CHANNEL VIEW memory.
- Added a display all function for all channel types.
- Added new parameter setting method for Quick Controls.
- Expanded adjustment function for "Mixer" window width.
- Added support for hierarchical display of the Plug-in list.
- Changed the user interface of "Mixer."
- Added the function in which the network interface selected by the NUAGE system will be automatically used for the Dante primary interface.
-
System Requirements
OS Windows 8/8.1(64-bit) Windows 7 SP1(64-bit) CPU Intel/AMD dual core processor or higher Memory 8GB or more Interface Equipped with an Ethernet connector
Equipped with an RS-232C connector for controlling an AD8HR from the Nuage Fader. (When connecting the AD8HR to the USB connector, make sure to use a USB to Serial converter.)HDD Free disk space of 100MB or more; high-speed hard disk DAW Nuendo 6.0.7 or later, Cubase 7.5.40 or later *We are currently testing the compatibility of TOOLS for NUAGE with Cubase Pro 8.5.
former version information.
V1.7.1
- Changed the system requirements for software.
New Functions
- Added support for Cubase Pro 8.5.
Fixed Bugs
- Solved some minor problems.
V1.7.0
- Changed the system requirements for software.
New Functions
- Added channel assignment for VCA fader. (Nuendo 7 or later)
- Added assignment change for keys in SECTION CONTROL section.
- Added assignment change for keys in CHANNEL VIEW CONTROL section.
- Added a function for expanding and collapsing folder tracks.
- Added support for GPIO.
- Added setting automation mode for each track.
- Added Insert operation for control room channels.
- Added new parameters in the CONTROL ROOM page.
- Added new settings for saving project files.
- Added initializing direct monitoring settings.
Improvements
- Expanded CHANNEL VIEW memory.
- Added a display all function for all channel types.
- Added new parameter setting method for Quick Controls.
- Expanded adjustment function for "Mixer" window width.
- Added support for hierarchical display of the Plug-in list.
- Changed the user interface of "Mixer."
- Added the function in which the network interface selected by the NUAGE system will be automatically used for the Dante primary interface.
V1.6.0
- Changed the system requirements for software.
New Functions
- Added support for Cubase Pro 8.
- Added stereo panner switching function.
- Added more parameters to Channel Strip section.
- Added key function (shortcut) for dividing events into selected ranges.
- Added collective bypass function for inserts.
- Added collective bypass function for dynamics.
- Added support for remote operation of the RMio64-D.
- Added a function for Project cursor positioning.
- Added enable/disable selection for [Jog wheel] during Project playback.
Improvements
- Updated Direct Monitoring window in Nuage I/O Setup.
- Added support for switching parameters in Channel Setting mode.
- Changed display on the Marker Jump pop-up window into the list display.
- Changed the MUTE Button Behavior setting to MUTE/SOLO Behavior.
Fixed Bugs
- Solved a problem in which direct monitoring could not be used if Dante Tx channels had been labeled.
- Solved a problem in which direct monitoring could not be used if the Dante device name had been changed.
- Solved some other minor problems.
V1.5.0
New Functions
- The HA gain of R series devices can now be controlled. Installation of Bonjour on your computer is required to control the R Series remotely.
- The parameters for "Quick Controls" assigned to a channel can now be edited on the [Multi Function Display].
- You can control VST instruments on instrument tracks on the CHANNEL CONTROL page.
- You can now use the "track visibility control" function of Nuendo 6.5.
- Added a super fine mode which allows for finer adjustments of the parameters on the CHANNEL STRIP.
- Channel "Sends" can now be panned.
- You can now control the parameters of the new Nuendo 6.5 plugin (Magneto II) and Noise Gate parameters in the SECTION CONTROL section.
- Support has been added for the improved ADR functions in Nuendo 6.5.
- You can now select an output for direct monitoring in NUAGE I/O Setup.
Improvements
- If a list does not completely fit on the [Multi Function Display], you can now drag to scroll the list on the screen.
- [CYCLE] and [●] (record) were removed from Smart Switch.
- The SETUP page of Nuage Master is divided into three pages since the number of configurable settings has been increased.
Fixed Bugs
- Solved a problem in which fader's value reverts to the default value when you slide the [Touch slider bar] while holding the [CTRL] button of Nuage Fader.
- Solved a problem in which the LED and [Multi function display] did not light, when the project file was opened immediately after the first start of Nuendo.
- Solved a problem in which the order of Nuage I/O devices added to the Workgroup was changed when NUAGE Workgroup Manager was restarted with not all of the added Nuage I/O devices being powered on.
- Solved some other minor problems.
Known issue
- If you name a Channel Label in Transmit tab from Dante Contoller, Direct monitoring function may not work properly. Please keep them unchanged.
V1.2.0
New Functions
- Added support for remote operation of AD8HR remote preamp from Nuage Master.
- Improved the EQ Band Curve display.
- Added support for marker colors in Nuendo.
- Improved parameter indications on the Multi Function Display.
- Improved pan control operations from the channel strip.
Fixed Bugs
- Solved a problem in which the cue mix monitor would be interrupted when changing the Monitor from the CONTROL ROOM section on the Nuage Master.
- Solved a problem in which the Select Track pop-up window of the DAW A may have been displayed when DAW B or DAW C was operated by using NUMERIC PAD.
- Solved a problem in which direct monitoring would be disabled if executing “Revert” of the Nuendo when direct monitoring is on.
- Solved a problem in which [MOVE] would become dim if pressing and holding [ZOOM] when [MOVE] and [SELECT] on the Nuage Master are lit.
- Solved a problem in which no plug-in effect may have been applied if the order of the effects were rearranged when the Channel Strip rack in “Mixer” on Nuendo was displayed.
- Solved some other minor problems.
V1.1.0
New Functions
- Added the ADR mode.
- Added the functions for configuring the buttons in the USER ASSIGNABLE section.
- Added support for remote operation of the AD8HR remote preamp.
- Added the display in the [Channel name display].
- Added display channels on the LCD.
- Added some track select operations.
- Added some Zoom In and Zoom Out operations.
- Added some editing operations.
- Added the input format when you set the Project Cursor position in the Locate function.
- The dynamics of each channel can now be operated on the DYN page of Nuage Master.
- Added the function for locking/unlocking “TEMPO” and “CLICK” in the MAIN page of the TRANSPORT page of Nuage Master.
- Key input can now be executed continuously while pressing the [Input keys] in the NUMERIC PAD section of the Nuage Master.
- Added the display of “Channel Configuration” to “Channel Information” in the upper left of the CHANNEL CONTOROL page of the Nuage Master.
- Added the “L&R” parameter, which lets you simultaneously operate “PAN” of both left and right channels, to the PAN page of Nuage Master.
- Changed so that only applicable channel strip types are displayed when “Show One Channel Strip Type” is selected in the “Mixer” window of Nuendo.
- Changed the display of [Channel name display] in the Left Lock area or the Right Lock area. The other main fixes and enhancements for each program are explained below.
V1.1.0
NUAGE Workgroup Manager
- Changed the "Check for Update" button to the "Update" button.
V1.0.0
- 1st. Release Version.
License agreement and software
TOOLS for NUAGE V1.7.0 for Win 8.1/8/7 (64-bit) (Previous version)
You also need to download these files.
You are recommended to download these files.
-
-
NUAGE Workgroup Manager Operation Manual
-
NUAGE V1.7 Supplementary Manual [English]
-
NUAGE V1.7 Supplementary Manual [French]
-
NUAGE V1.7 Supplementary Manual [German]
-
NUAGE V1.7 Supplementary Manual [Italian]
-
NUAGE V1.7 Supplementary Manual [Spanish]
-
NUAGE V1.7 Supplementary Manual [Portuguese]
-
NUAGE V1.7 Supplementary Manual [Russian]
-
NUAGE V1.7 Supplementary Manual [Chinese]
-