Print This Page

PM5D V2 Editor V2.2.6-3 for Mac OS X 10.13-10.7

Important Notice

Important Notice for Mac OS X Yosemite (10.10) users.

  • The level meters occasionally stop working when the file dialog box is opened. In that case, clicking on an editor window will make them work again.
  • The PM5DV2 Editor is for use with the Studio Manager V2 Host and USB-MIDI Driver. Be sure to use the latest versions of both the Studio Manager V2 Host and USB-MIDI Driver. Both are available from this site.
  • Use the Editor with the supported firmware listed in the following table. Using an unsupported Editor/firmware combination may result in data corruption and unexpected behavior. If a failure occurrs, turn the power ON while pressing the [STORE] key on the panel, and then select INITIALIZE ALL MEMORIES to restart normally.


PM5DV2/ DSP5D Compatibility (Mac / Intel)

PM5D V2 Editor DSP5D Editor Studio Manager V2 Host PM5D V2 Firmware DSP5D Firmware
2.2.6 2.3.5, 2.3.4 2.27 1.27
2.26 1.26
2.25 1.25
  • PM5DV2 user data is compatible with later firmware versions, but not with lower firmware versions. Cross-platform compatibility is provided for setup data which is directly saved to a compact flash memory via the PM5DV2, or saved as a ".PM5" file using the Editor application.

Note for Cascade Connection Mode

  • Be sure that the same firmware version is installed on all PM5DV2 units when you use more than two PM5DV2 units in cascade connection mode.
  • Be sure to install the latest versions when you use the PM5DV2 and DSP5D in cascade connection mode.

Main Revisions and Enhancements

New Feature

  • Now supports macOS 10.13.

System Requirements

OS Mac OS X:10.7.x/ 10.8.x/10.9.x/ 10.10.x/ 10.11.x/ masOS 10.12.x/ 10.13.x
CPU Intel Core family processor
Memory 1GB or more
HDD 100 MB or more
Display 1024 x 768 pixels or higher
Other Pointing device such as a mouse, USB port
Caution PM5DV2 Editor V2.2.6-2 does not run on Power PC.

former version information.

Editor V2.2.6 for Mac

New Feature
  • Release version for Intel Mac.

Editor V2.2.5 for Mac

Known problem when used on the new OS
  • The BATTERY status picture may not appear properly in PREFERENCE page. (Mac OS X 10.6)
Fixed bug
  • Fixed a problem in which the signal processing and screen statuses were not identical when patching the same port simultaneously to each Insert Out in the Input Patch library and Output Patch library by for example, recalling a library which inserts the same GEQ module.

Editor V2.2.3 for Mac

  • The PM5DV2 Editor now supports the PM5D update to the firmware V2.23.

License agreement and software

PM5D V2 Editor V2.2.6-3 for Mac OS X 10.13-10.7

You also need to download these files.

You are recommended to download these files.

Return to Top