Print This Page

PM5D V2 Firmware V2.11 (Previous version)

PM5DV2/ DSP5D Compatibility (Win)

Use the Editor software only with a supported firmware version.

PM5D V2 Editor DSP5D Editor Studio Manager V2 Host PM5D V2 Firmware DSP5D Firmware
2.2.5 2.3.1, 2.3.0 2.27 1.27
2.26 1.26
2.25 1.25
2.2.4, 2.2.3 2.23 1.23
2.2.2 2.1.7 2.22 1.22
2.2.0 2.20 1.20
2.1.1 2.11 1.11
2.1.0 2.06, 2.05 1.05
  • PM5DV2 user data is compatible with later firmware versions, but not with lower firmware versions. Cross-platform compatibility is provided for setup data which is directly saved to a compact flash memory via the PM5DV2, or saved as a ".PM5" file using the Editor application.

Note for Cascade Connection Mode

  • Be sure that the same firmware version is installed on all PM5DV2 units when you use more than two PM5DV2 units in cascade connection mode.
  • Be sure to install the latest versions when you use the PM5DV2 and DSP5D in cascade connection mode.

PM5DV2/ DSP5D Compatibility (Mac / Intel)

PM5D V2 Editor DSP5D Editor Studio Manager V2 Host PM5D V2 Firmware DSP5D Firmware
2.2.6 2.3.5, 2.3.4 2.27 1.27
2.26 1.26
2.25 1.25
  • PM5DV2 user data is compatible with later firmware versions, but not with lower firmware versions. Cross-platform compatibility is provided for setup data which is directly saved to a compact flash memory via the PM5DV2, or saved as a ".PM5" file using the Editor application.

Note for Cascade Connection Mode

  • Be sure that the same firmware version is installed on all PM5DV2 units when you use more than two PM5DV2 units in cascade connection mode.
  • Be sure to install the latest versions when you use the PM5DV2 and DSP5D in cascade connection mode.

Main Revisions and Enhancements

Fixed Bugs

  • The Global Paste function now works properly even when cascade-connection is enabled.
  • Even when cascade-connection is enabled, scene editing operations (insert, cut, paste, clear) and undo operations for scene store/recall now work properly.
  • Fixed a problem in which a scene shown in the scene list could not be sometimes recalled or edited (insert, cut, paste, clear) if a scene was edited several times.
  • Even when a device other than machine #1 (PM5D) is selected as the target of the PM5D's panel operations and a scene including a fade time setting is recalled, the faders now move properly according to the fade time setting.
  • DME control functions routed through an MY16-CII card now work properly.
  • Fixed a problem in which a scene could not be undone if the DIRECT RECALL function was assigned to a User Defined Key and the scene was recalled.
  • Fixed a problem that occurred when the internal effects were used for the GEQ module.
  • Fixed a problem in which cascade-connection (PM5D — DCU5D — DSP5D) would occasionally not be restored even if the network was restored after the connection was temporarily disconnected due to network failure, etc.

License agreement and software

PM5D V2 Firmware V2.11 (Previous version)

Return to Top