Print This Page

PM5D V2 Firmware V2.22 (Previous version)

PM5DV2/ DSP5D Compatibility (Win)

Use the Editor software only with a supported firmware version.

PM5D V2 Editor DSP5D Editor Studio Manager V2 Host PM5D V2 Firmware DSP5D Firmware
2.2.5 2.3.1, 2.3.0 2.27 1.27
2.26 1.26
2.25 1.25
2.2.4, 2.2.3 2.23 1.23
2.2.2 2.1.7 2.22 1.22
2.2.0 2.20 1.20
2.1.1 2.11 1.11
2.1.0 2.06, 2.05 1.05
  • PM5DV2 user data is compatible with later firmware versions, but not with lower firmware versions. Cross-platform compatibility is provided for setup data which is directly saved to a compact flash memory via the PM5DV2, or saved as a ".PM5" file using the Editor application.

Note for Cascade Connection Mode

  • Be sure that the same firmware version is installed on all PM5DV2 units when you use more than two PM5DV2 units in cascade connection mode.
  • Be sure to install the latest versions when you use the PM5DV2 and DSP5D in cascade connection mode.

PM5DV2/ DSP5D Compatibility (Mac / Intel)

PM5D V2 Editor DSP5D Editor Studio Manager V2 Host PM5D V2 Firmware DSP5D Firmware
2.2.6 2.3.5, 2.3.4 2.27 1.27
2.26 1.26
2.25 1.25
  • PM5DV2 user data is compatible with later firmware versions, but not with lower firmware versions. Cross-platform compatibility is provided for setup data which is directly saved to a compact flash memory via the PM5DV2, or saved as a ".PM5" file using the Editor application.

Note for Cascade Connection Mode

  • Be sure that the same firmware version is installed on all PM5DV2 units when you use more than two PM5DV2 units in cascade connection mode.
  • Be sure to install the latest versions when you use the PM5DV2 and DSP5D in cascade connection mode.

Main Revisions and Enhancements

Fixed Bugs

  • Fixed a problem in which a scene on the cascade slave PM5D would occasionally not be recalled when recalling the scene of two cascade-connected PM5D units from an external GPI device which was connected to the cascade master PM5D
  • Fixed a problem in which some settings, such as INPUT/OUTPUT PATCH and MIDI CONTROL CHANGE, would not operate correctly as indicated on the screen when the data created from the PM5D V1 was loaded into the PM5D V2
  • Added a confirmation message to prevent inadvertent erasing of some parts of memory on the DSP5D when enabling the cascade-connection between the PM5D and the DSP5D(s). Blank scenes on the PM5D will erase the scene data of the same number on each DSP5D. The PM5D's library data not associated with a scene will be transmitted and overwritten on each DSP5D to synchronize libraries
  • Fixed a problem in which some of the panel indications would not be correct, such as encoders' PAN indication and name indicators' brightness, and the send operation could not be performed from the ST IN to the MONO bus using the MIX section encoders when different machines' layers were selected on the INPUT channel strip and the ST IN channel strip while the PM5D and the DSP5D(s) were cascade-connected
  • Fixed a problem in which indication of the screen and the panel would occasionally not be consistent when having recalled a scene while two PM5D units were cascade-connected, and the DCA groups and MUTE groups were cascade-linked

License agreement and software

PM5D V2 Firmware V2.22 (Previous version)

Return to Top