Print This Page

R Remote V3.1.1 for Mac (Previous version)

Important Notice

  • You need to install the Dante Controller before using the R Remote software.
  • In the "System Preferences" -> "Network" screen, if using manually configured settings, leave the router item blank or enter the IP address of the connected router. When using with Dante Controller, there are cases in which the device can no longer be found correctly.

R Remote / R Series / Tio Firmware Compatibilities

R Remote Rio/Ri/Ro Firmware Set RMio Firmware Set RSio Firmware Set Tio Firmware
4.1.0 4.10, 3.11, 3.10 3.11, 3.10 4.10, 3.10, 1.00 1.01
3.1.1 3.11, 3.10 3.11, 3.10 3.10, 1.00 1.00
3.0.0 3.11, 3.10 3.11, 3.10 3.10, 1.00  
2.0.0 3.00 3.00    
1.0.0(Win Only) 1.70 1.70    

R Series Firmware Set

Rio3224-D/Rio1608-D/Ri8-D/Ro8-D

Firmware Set Main Dante
4.10 4.10 3.10.0.19 - 4.0.3.1 - 1.3.2
3.11 3.11 3.8.0.24 - 3.5.1.8 - 1.2.2
3.10 3.10
3.00 3.00
2.00 2.01 3.7.1.10 - 3.4.9.3 - 1.2.1
1.70 1.70
1.61 1.61 3.6.4.20-3.4.3.8-1.1.0
1.51, 1.50 1.51, 1.50
1.15 1.15
1.14 1.14 3.6.4.7 - 3.4.2.1 - 1.0.8
1.11 1.11
1.02 1.02 3.6.3.0 - 3.4.1.0 - 1.0.4

RMio64-D

Firmware Set Main Dante
3.11 3.11 3.8.0.24 - 3.5.1.8 - 1.2.2
3.10 3.10
3.00 3.00
1.00 1.00 3.7.1.10 - 3.4.9.3 - 1.2.1

RSio64-D

Firmware Set Main Dante
4.10 4.10 3.10.0.19 - 4.0.3.1 - 1.3.2
3.10 3.10 3.8.0.24 - 3.5.1.8 - 1.2.2
1.00 1.00

Main Revisions and Enhancements

New Features

  • Now supports Tio1608-D.

System Requirements

In order to use R Remote, you'll need the following items.
  • A computer equipped with the following conditions
OS Mac OS X 10.9.5, 10.10.x
CPU Intel Core i3/i5 or higher
HDD 120MB or more
Connector An Ethernet connector (1000BASE-T or higher recommended.)
Other Dante Controller must be installed, Ethernet cable (CAT5e or better), Network switch (with gigabit Ethernet support)

License agreement and software

R Remote V3.1.1 for Mac (Previous version)

You also need to download these files.

You are recommended to download these files.

Return to Top