Print This Page

SP2060 firmware V1.30 for Win (Previous version)

Important Notice

  • The hardware specification for DME Firmware V3.5x or earlier differs from the one for Firmware V3.8x or later. Therefore firmware V3.5x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.5x or earlier. (This does not apply to the SP2060 or ICP1.)
    If you need to upgrade your DME from V3.55 or earlier to V3.81 or later, please contact your Yamaha dealer.
  • Save an up-to-date DME project file (*.daf). Don't update unless an up-to-date &quote;.daf&quote; file has already been saved on your computer. Without the &quote;.daf&quote; file, you will not be able to restore DME operation.
  • When DME64N/24N units running firmware version 3.5x or earlier and DME64N/24N or DME Satellite units running firmware versions 3.81 or later are combined in the same device group, DME64N/24N units running firmware version 3.5x or earlier cannot be designated as the group master.

DME Designer/Firmware compatibility

DME Designer Version Firmware Version
  DME-N, ICP1 DME Satellite SP2060
3.8.0 3.86, 3.85, 3.84, 3.83, 3.82, 3.81*, 3.60, 3.59, 3.58, 3.57, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01 3.86, 3.85, 3.84, 3.83, 3.82, 3.81*, 3.60, 3.59, 3.58, 3.57, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01 1.32, 1.31, 1.30, 1.24, 1.23, 1.22, 1.21
3.5.1, 3.0.2, 3.0.1, 3.0.0 3.60, 3.59, 3.58, 3.57, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.02, 3.01 3.60, 3.59, 3.58, 3.57, 3.56, 3.55, 3.52, 3.51, 3.11, 3.10, 3.09, 3.06, 3.04, 3.03, 3.01 1.32, 1.31, 1.30, 1.24, 1.23, 1.22, 1.21

If the Program Ducker component is used, both DME firmware and DME Designer versions must be V3.5x or greater.

* Firmware version 3.81 is not available for download.

Main Revisions and Enhancements

New Features

  • The User Lock function now enables you not only to lock the entire panel operation but also to lock each key.
  • If a password has been set for the User Lock function, the same password now applies to switching scene protection on or off.
  • The SP2060 Backup function has been added to the DME Designer, enabling you to back up the SP2060 data to a computer and to restore the data on multiple SP2060 units.
  • The following speaker processor libraries have been added.
    - IS1112
    - IS1112+IF2108 (Settings for combination of IS1112 and IF2108)
    - IS1112+IF2208 (Settings for combination of IS1112 and IF2208)

You also need to download these files.

Return to Top