Print This Page

SWP1 Firmware Rev.2.01.03 (Previous version)

Important Notice

How to update the firmware

For details, refer to the "Yamaha Audio Network Monitor User Guide." and the help menu in Web GUI.

  1. Connect the SWP1, the Dante devices, and the computer with LAN cables.
    Connect with the port of the SWP1 set to VLAN 1.
  2. Start the Yamaha Audio Network Monitor.
  3. Select the SWP1 for update in the tree view.
  4. Click the [Web GUI] button on the device detail view.
    Under the factory settings, the user name is set to “administrator” and the password is blank.
  5. Select [Management] → [Maintenance] → [Update firmware], then click the [Next] button in "Update firmware from PC."
  6. Click the [Select a file] button, and then select the firmware file with the extension “.bin” that you’ve downloaded and expanded.
  7. Click the [OK] button.
  8. Click the [Execute] button.

Wait until the update is completed. SWP1 automatically restarts and is ready to use.

Main Revisions and Enhancements

Changed specifications

  • Changed the combination of the link aggregation of the trunk line of VLAN PRESET B, allowing you to use two trunk lines.
    [SWP1-8 / SWP1-8MMF]
    (Old) Ports 7, 8, 9, 10 = Trunk 1
    (New) Ports 7, 8 = Trunk 1
    Ports 9, 10 = Trunk 2
    (Old) Ports 15, 16, 17, 18 = Trunk 1
    (New) Ports 15, 16 = Trunk 1
    Ports 17, 18 = Trunk 2
  • Now allows access from a host belonging to a network segment different than the segment of the SNMP-enabled VLAN.

Fixed bugs

  • Fixed a problem in which two or more devices of SWP1 in the network, when the IGMP snooping function was in effect, depending on the order of starting or timing of devices, multicast communication might not have been transmitted between switches.
    Through this, the following conditions have been eliminated or minimized:
    • Two or more PTP masters of Dante appeared, and noise was added to the sound.
    • The multicasting sound of Dante was cut off.
    • In addition, the control communication using multicasting did not function.The above-mentioned faults had occurred due to the following compound factors:
    • In the IGMP Snooping function, when a multicasting receiving terminal ended reception, multicast transfer to the multicasting router port might be suspended.
    • A multicast frame might not be transmitted when the number of ports of link aggregation fluctuated, while the link aggregation logical interface was using the IGMP Snooping function.
    • In the IGMP Snooping function, when a multicasting router port had a multicasting receiving terminal and the multicasting router port was changed by the path change by a spanning tree function, etc., multicasting transmission was not performed normally.
  • Fixed a problem in which immediately after starting, the CPU activity ratio might become high.
  • Fixed a problem when VLAN to which DHCP is set was deleted, the CPU activity ratio became 100%.
  • Fixed a problem in which invalid information was transmitted when an acquisition demand of "IP address settings" information was received from the Yamaha Audio Network Monitor.
  • Fixed a problem in which, on the "Create VLAN" page of Web GUI, incorrect information may have been displayed on the item of the IP address.
  • Fixed some other minor problems.

License agreement and software

SWP1 Firmware Rev.2.01.03 (Previous version)

You also need to download these files.

You are recommended to download these files.

Return to Top