Print This Page

TF Editor V2.50 for Mac OS X 10.9-10.11

Important Notice

[Notice: Checking the version number]
You may check the TF main firmware version number from the version field in the About screen of the SYSTEM SETUP screen.

TF Editor/Firmware Compatibility

Please make sure to use appropriate version of TF Editor which is compatible with your TF firmware in reference to the following compatibility chart. Using an unsupported Editor/firmware combination may result in unexpected behavior.

TF Editor(Win) TF Editor(Mac) TF Firmware Tio1608-D Firmware NY64-D Firmware TF Stagemix MonitorMix
3.00 3.00 3.00*3) 1.00 3.8.0.24, 3.5.1.8, 1.28 3.0.0 1.2.0
2.50 2.50 2.50 1.00 3.8.0.24, 3.5.1.8, 1.28 2.5.0 1.1.0
2.00 2.00 2.00, 2.01 1.00 3.8.0.24, 3.5.1.8, 1.26 2.0.0 1.0.2
1.13, 1.12 1.12, 1.13 1.12 - - 1.1.0 1.0.2
1.10 - 1.10, 1.11*2) - - 1.1.0 1.0.1*1)
- - 1.01 - - - -
*1)Please use MonitorMix V1.0.2 when you useTF Firmware V1.12.or later.
If you use previous MonitorMix V1.0.1 with TF Firmware V1.12, some troubles may occur. (For example, MonitorMix is forced to stop.)
*2) TF Firmware V1.11 includes only efficiency improvement of product inspection. So it does not include new function or some improvements.
*3) First release version for TF-Rack(preinstalled version)

TF Editor V2.00 or older are not support Mac OS X 10.11.x.

Main Revisions and Enhancements

V2.00 to V2.50

Additional Function

  • Added four MATRIX busses and four MATRIX channels.
    You can now send the post ON signals from the AUX1-20, STEREO, and SUB channels to the MATRIX busses.
    The MATRIX channels have 4-band EQ and DELAY. For detailed information, refer to the TF series Reference Manual.
NOTICE

Scenes saved via the TF series V2.01 or earlier do not include the MATRIX parameters. This means that MATRIX parameters will not change even such Scenes are recalled.

  • Added the “Output Delay” effect type which simply has only a delay time parameter.

Specification Changes

  • When executing the Default menu in the EFFECT screen, the default parameter values of the selected effect type will be set.

Fixed bugs

  • Solved a problem in which when connecting a TF series and TF editor/TF StageMix, the setting in the TF series and the setting in the TF Editor/TF StageMix did not match after executing the Compare menu or the Paste menu in GEQ (Flex12).
  • Solved a problem in which executing Store and Edit menu operations to the same Library continuously over a short time in the LIBRARY screen would result in not being able to recall a Scene, or files not appearing.
  • Solved a problem in which a CH VIEW pop-up icon did not appear properly in the OVERVIEW screen.
  • Solved some minor bugs.

System Requirements

OS Mac OS X 10.9.x/10.10.x/ 10.11.x
CPU Intel Core family processor
Memory 2GB or more
HDD 100 MB or more
Display 1280 x 768 or higher resolution, 16-bit or higher color depth
Other Pointing devaice(mouse, trackpad, etc), Ethernet connection (1000BASE-T/100BASE-TX)

*V2.00 or older are not support Mac OS X 10.11.x.

former version information.

V2.50

Additional Function

  • Added four MATRIX busses and four MATRIX channels.
    You can now send the post ON signals from the AUX1-20, STEREO, and SUB channels to the MATRIX busses.
    The MATRIX channels have 4-band EQ and DELAY. For detailed information, refer to the TF series Reference Manual.
NOTICE

Scenes saved via the TF series V2.01 or earlier do not include the MATRIX parameters. This means that MATRIX parameters will not change even such Scenes are recalled.

  • Added the “Output Delay” effect type which simply has only a delay time parameter.

Specification Changes

  • When executing the Default menu in the EFFECT screen, the default parameter values of the selected effect type will be set.

Fixed bugs

  • Solved a problem in which when connecting a TF series and TF editor/TF StageMix, the setting in the TF series and the setting in the TF Editor/TF StageMix did not match after executing the Compare menu or the Paste menu in GEQ (Flex12).
  • Solved a problem in which executing Store and Edit menu operations to the same Library continuously over a short time in the LIBRARY screen would result in not being able to recall a Scene, or files not appearing.
  • Solved a problem in which a CH VIEW pop-up icon did not appear properly in the OVERVIEW screen.
  • Solved some minor bugs.
V2.00 (Win)

Additional Function

  • Added “Ping Pong Delay” and “Dual Pitch” effect types.
  • Added the “Manage Library/Scene” window to manage Libraries and Scenes.
  • Added the menu to open the website for downloading Channel Libraries (QuickPro Presets).
  • Added the “All Nominal” function to set the send level settings of all AUX busses or SUB bus to nominal (0 dB) in the menu of each SEND FROM screen.
  • Added the “Dup. STEREO” function to set the send level settings of AUX busses or SUB bus to the same settings of the channel faders in the menu of each SEND FROM screen.
  • Added the function to send to the SUB bus from ST IN1/2 or FX RTN 1/2.
NOTE

When recalling a Scene, or a Channel Library stored via the V1.xx version, these send parameters are not changed.

  • Added some default Presets in the Channel Library. Some Preset data have been modified.
    This change will be reflected when executing the “Initialize All Memory” function after updating to V2.00.

Specification Changes

  • Changed the specification in which the channel names of each stereo-linked mono channel are not linked. However, the channel names link in the permanent stereo channels such as ST IN, AUX9/10, etc.
  • The reverb/ER effects are now available in all FX/InsFX.

Improvements

  • Improved the Library screen.
    • Unrecallable Libraries are not listed.
    • You could recall each module such as EQ, COMP, FX, etc from a Preset with different channel types.
  • Network setting is now available when no devices are connected to the Network connector.
  • The data transfer for Meters is now available between the TF series and the TF Editor even when the DHCP server does not exist with the network setting is set to DHCP.
  • When recalling or storing a Scene via the TF Editor, or StageMix, the Scene number and name displays in the TF series are also follow them.

Fixed bugs

  • Solved a problem in which when operating the analog gain when the input source setting has been set to “INPUT” and channel link has been set to the channel, the analog gain of the channel using the same input signal of the INPUT port (TF5: CH1-8 and CH33-40, TF3: CH1-16 and CH25-40, TF1: CH1-16 and CH17-32) will link regardless of the input source selection.
  • Solved the problem in which the meter could not hold the peak of the OVER level.
  • Solved the problem in which some meters would not work properly when loading the setting file with a different meter point setting.
  • Solved some minor bugs.
V2.00 (Mac)

This version is not support Mac OS X 10.11.x.

Additional Function

  • Added “Ping Pong Delay” and “Dual Pitch” effect types.
  • Added the “Manage Library/Scene” window to manage Libraries and Scenes.
  • Added the menu to open the website for downloading Channel Libraries (QuickPro Presets).
  • Added the “All Nominal” function to set the send level settings of all AUX busses or SUB bus to nominal (0 dB) in the menu of each SEND FROM screen.
  • Added the “Dup. STEREO” function to set the send level settings of AUX busses or SUB bus to the same settings of the channel faders in the menu of each SEND FROM screen.
  • Added the function to send to the SUB bus from ST IN1/2 or FX RTN 1/2.
NOTE

When recalling a Scene, or a Channel Library stored via the V1.xx version, these send parameters are not changed.

  • Added some default Presets in the Channel Library. Some Preset data have been modified.
    This change will be reflected when executing the “Initialize All Memory” function after updating to V2.00.

Specification Changes

  • Changed the specification in which the channel names of each stereo-linked mono channel are not linked. However, the channel names link in the permanent stereo channels such as ST IN, AUX9/10, etc.
  • The reverb/ER effects are now available in all FX/InsFX.

Improvements

  • Improved the Library screen.
    • Unrecallable Libraries are not listed.
    • You could recall each module such as EQ, COMP, FX, etc from a Preset with different channel types.
  • Network setting is now available when no devices are connected to the Network connector.
  • The data transfer for Meters is now available between the TF series and the TF Editor even when the DHCP server does not exist with the network setting is set to DHCP.
  • When recalling or storing a Scene via the TF Editor, or StageMix, the Scene number and name displays in the TF series are also follow them.

Fixed bugs

  • Solved a problem in which when operating the analog gain when the input source setting has been set to “INPUT” and channel link has been set to the channel, the analog gain of the channel using the same input signal of the INPUT port (TF5: CH1-8 and CH33-40, TF3: CH1-16 and CH25-40, TF1: CH1-16 and CH17-32) will link regardless of the input source selection.
  • Solved the problem in which the meter could not hold the peak of the OVER level.
  • Solved the problem in which some meters would not work properly when loading the setting file with a different meter point setting.
  • Solved some minor bugs.
V1.13 (Win)

Improvements

  • Improved the lighting/flashing/off function of the ON button in the Channel Strip area for more intuitive understanding of muted channels, specifically when turning on the INPUT button or FX button in the MUTE area, or when operating the ON buttons of DCA1 – 8.
  • Improved the function in which an operation in the SENDS ON FADER area is related with an AUX channel to CUE when the CUE function for an AUX channel is set to on.

Fixed bugs

  • Solved a problem in which when you zoom up/down the display size via the Zoom function in the Window menu, the previous zoom size could not be restored even if it was set.
  • Solved a problem in which when you export a Preset in the LIBRARY window via a touch operation, the application will slow down in action.

Known Issue

  • A problem would occur in which some level meters are not displayed at the correct meter point after loading a console data file (.tff) which uses a different meter point.
    Changing the meter point in the meter display solves the problem.

V1.13 (Mac)

Specification Changes

  • The function of the green button at the upper left of the window has been changed from "full screen" to "maximization."

Improvements

  • Improved the lighting/flashing/off function of the ON button in the Channel Strip area for more intuitive understanding of muted channels, specifically when turning on the INPUT button or FX button in the MUTE area, or when operating the ON buttons of DCA1 – 8.
  • Improved the function in which an operation in the SENDS ON FADER area is related with an AUX channel to CUE when the CUE function for an AUX channel is set to on.

Fixed bug

  • Solved a problem in which when you zoom up/down the display size via the Zoom function in the Window menu, the previous zoom size could not be restored even if it was set.

Known Issues

  • The application will slow down in action when you zoom up the display via the Zoom function in a Mac with Retina display.
  • A problem would occur in which some level meters are not displayed at the correct meter point after loading a console data file (.tff) which uses a different meter point.
    Changing the meter point in the meter display solves the problem.
V1.12 (Win)

Additional Function

  • Add a Zoom function (100%, 150%, and 200%) to the Window menu.

Specification Changes

  • Changed the About menu to the Help menu. (Windows)
  • The default Presets are now set to read-only. In addition, some Presets have been modified. To apply these changes, execute “Initialize All Memories” after updating the TF Editor to V1.12.

Fixed bugs

  • Solved some minor bugs.

Known Issue

  • We found a problem that some level meters are not displayed at the correct meter point after loading a console data file (.tff) which uses a different meter point.
    Changing the meter point in the meter display solves the problem.

V1.10

  • The initial release version.

License agreement and software

TF Editor V2.50 for Mac OS X 10.9-10.11

Return to Top