Print This Page

Important Notice

  • Use the Editor with the supported firmware listed in the following table.
  • If you have already installed older version, please un-install it first and then install the new version.

Amp Editor/Firmware Compatibility

Amp Editor TXn Firmware ACD1 Firmware
1.2.1 1.30, 1.11(*), 1.10(*) 1.12, 1.11, 1.10
1.2.0, 1.1.0 1.11, 1.10
1.0.1, 1.0.0 1.02, 1.01, 1.00 -

(*) When Partial Lock is selected on the Amp Editor, the TXn is set to Full Lock.

Version Information

New Features

  • (TXn only) Added Partial Lock in the “Utility” dialog box -> [Setup] tab -> [Front Panel Operation] -> [Panel], enabling locking of panel operations other than mute, attenuation, and library recall.

Improvement

  • The library items for the third-party speakers are now available in the Speaker Processor component library.

Fixed Bugs

  • Fixed a problem in which the IP address for the device(s) may not have been assigned, when "IP Address Mode" was repeated and changed using the [DHCP] button and the [MANUAL] button of the "Network Setup" dialog box.
  • Fixed a problem in which the project could not be saved (over written) when the project file icon was double-clicked and the Amp Editor was started.
  • Fixed a problem in which the Amp Editor was terminated in a situation when the power of the device was quickly turned off and on when the Amp Editor was online.
  • Fixed a problem in which the ID may be displayed with "the right value+1" in the scene list of the "Scene Link Manager" dialog box.
  • Fixed a problem in which the short-cut key [Ctrl]+[N] was active when online.
  • Fixed a problem in which parameters of the controls in a custom control panel may not reflect a scene recall.
  • Fixed a problem in which the Amp Editor was frozen when the power of all devices were turned on again after being turned off while the “Device Information” dialog box was displayed.

System Requirements

OSWindows 7 (64 or 32 bit)Windows Vista (64 or 32 bit)Windows XP (Professional / Home Edition; SP2 or later)
CPU32bit: 2GHz or higher Intel Core/Pentium/Celeron family processor;
64bit: Intel 64 compatible processor		2GHz or higher Intel Core/Pentium/Celeron family processor1.5GHz or higher Intel Core/Pentium/Celeron family processor
Memory32bit: 1GB or more;
64bit: 2GB or more		1GB or more512MB or more
HDD300 MB or more
Display1024 x 768 pixels or higher; High Color 16-bit or higher
OtherEthernet (100Base-TX/10Base-T) port

License agreement and software

Amp Editor V1.2.1 for Win

Upgrade Instruction

Related Downloads

Return to Top