Print This Page

TXn Firmware V1.11 for Win (Previous version)

Important Notice

  • Use the Editor with the supported firmware listed in the following table.

Amp Editor/XMV Firmware/TXn Firmware/ACD1 Firmware Compatibility

Amp Editor XMV Firmware TXn Firmware ACD1 Firmware
1.3.1 1.20, 1.12 1.30, 1.11(*), 1.10(*) 1.13, 1.12, 1.11, 1.10
1.3.0 1.12
1.2.1 -
1.2.0, 1.1.0 - 1.11, 1.10
1.0.1, 1.0.0 - 1.02, 1.01, 1.00 -

(*) When Partial Lock is selected on the Amp Editor, the TXn is set to Full Lock.

Main Revisions and Enhancements

Fixed Bugs

  • Fixed a problem in which the alert message "FAN Failed" would very occasionally appear, even though the fan was working properly, when the power was turned on or switched from Standby to On.
  • Fixed a problem in which measuring of the impedance may not have been possible when "Calibration" of "Calibration by Pilot Tone" was executed in the Signal Chain Check function.

System Requirements

OS Windows 7 (64 or 32 bit) Windows Vista (64 or 32 bit) Windows XP (Professional / Home Edition; SP2 or later)
CPU 32bit: 2GHz or higher Intel Core/Pentium/Celeron family processor;
64bit: Intel 64 compatible processor
2GHz or higher Intel Core/Pentium/Celeron family processor 1.5GHz or higher Intel Core/Pentium/Celeron family processor
Memory 32bit: 1GB or more;
64bit: 2GB or more
1GB or more 512MB or more
HDD 300 MB or more
Display 1024 x 768 pixels or higher; High Color 16-bit or higher
Other Ethernet (100Base-TX/10Base-T) port

License agreement and software

TXn Firmware V1.11 for Win (Previous version)

You also need to download these files.

Return to Top