Print This Page

NUAGE FADER (Ncs500-FD)

General Specifications

Fader Stroke 100mm
Fader Resolution (+12 to -∞dB) 1024steps
Power Requirements 40W
Power Consumption US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
Operating Temperature Range 0℃ ~ 40℃
Storage Temperature Range -20℃ ~ 60℃
Dimensions (W x D x H) 581 x 720 x 156mm (22-7/8" x 28-3/8" x 6-1/8")
Net Weight 17.8kg (39.2lb)
Included Accessories Power cable, Brackets (2), Getting Started Guide
* All level controls are the nominal position. Output impedance of signal generator:150ohms

Control I/O Characteristics

Terminal Format Connector in Console
Network IEEE802.3 (10Base-T/100Base-TX) RJ-45
REMOTE RS-232C D-SUB Connector 9P (Male)

NUAGE MASTER (Ncs500-CT)

General Specifications

Power Requirements

30W
Power Consumption US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
Operating Temperature Range 0℃ ~ 40℃
Storage Temperature Range -20℃ ~ 60℃
Dimensions (W x D x H) 354 x 720 x 161mm (13-7/8" x 28-3/8" x 6-3/8")
Net Weight 10.0kg (22.0lb)
Included Accessories Jog wheel, Power cable, Brackets (2), Getting Started Guide

Electrical Characteristics

All level controls are the nominal position. Output impedance of signal generator:150ohms. 0dBu = 0.775Vrms

Input Output RL Conditions
Frequency Response TO PHONES Phones A or B Phones level control max,
Input level +4dBu(typ),
20Hz-20kHz, ref to the nominal
output level @1kHz
+0.5, -3dB
Total Harmonic Distortion *1 TO PHONES Phones A or B +4dB@20Hz-20kHz, Phones level control max 0.04%
Hum&Noise *2 TO PHONES Phones A or B Residual output noise, Phones level control min -100dBu
Crosstalk@1kHz *3 CH L Phones out CH R - L/R, adjacent inputs -80dB
CH R Phones out CH L -

Analog Input Characteristics

Input Terminals Actual Load Impedance For Use With Nominal GAIN Input level Connector in Console
Nominal Max. before clip
TO PHONES 20KΩ (BAL) 150Ω Lines 0dB +4dBu
(1.23 V)
+30dBu
(24.56 V)
XLR3-31type connectors *4

Analog Output Characteristics

Output Terminals Actual Source Impedance For Use With Nominal Output level Connector in Console
Nominal Max. before clip
PHONES A 100Ω 8Ω Phones 4mW 25mW Stereo Phone Jack (TRS)
(Unbalanced) *5
40Ω Phones 12mW 75mW
PHONES B 100Ω 8Ω Phones 4mW 25mW Stereo Phone Mini Jack (TRS)
(Unbalanced) *5
40Ω Phones 12mW 75mW
TALKBACK OUT 75Ω 600Ω Lines +4dBu
(1.23 V)
+24dBu
(12.3 V)
XLR-3-32 type (Balanced) *4

Control I/O Characteristics

Terminal Format Connector in Console
NETWORK IEEE802.3 (10Base-T/100Base-TX) RJ-45
REMOTE RS-232C D-SUB Connector 9P (Male)

Appendix
*1 Total Harmonic Distortion is measured with 80kHz LPF.
*2 Hum & Noise are measured with A-weighting filter and 30kHz LPF.
*3 Crosstalk is measured with a -30dB/octave filter @22kHz.
*4 XLR-3-31 and XLR-3-32 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)
*5 PHONES stereo phone jack is unbalanced. (Tip=LEFT, Ring=RIGHT, Sleeve=GND)


NUAGE I/O (Nio500-D16/Nio500-A16/Nio500-A8D8)

General Specifications

Sampling Frequency Internal 44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz
External 44.1kHz
+4.1667%/+0.1%/-0.1%/-4.0%
±200ppm
48kHz
+4.1667%/+0.1%/-0.1%/-4.0%
±200ppm
88.2kHz
+4.1667%/+0.1%/-0.1%/-4.0%
±200ppm
96kHz
+4.1667%/+0.1%/-0.1%/-4.0%
±200ppm
176.4kHz
+4.1667%/+0.1%/-0.1%/-4.0%
±200ppm
192kHz
+4.1667%/+0.1%/-0.1%/-4.0%
±200ppm
Frequency Response ±0.5dB, 20Hz-20kHz,ref to the nominal output level @1kHz, Input&Output Gain:0dB, Input level +4dBu(typ)
THD+N *1 Less than 0.005%, input to output, GAIN:0dB
Dynamic Range 120dB typ.,ADC
120dB typ.,DAC
Crosstalk@1kHz -100dB, CH1-16 , adjacent inputs
Power Requirements (wattage) NUAGE I/O 16D: 51W
NUAGE I/O 16A: 51W
NUAGE I/O 8A8D: 51W
Power Requirements
(voltage and hertz)
US/Canada: 120V 60Hz
Japan: 100V 50/60Hz
China: 110-240V 50/60Hz
Korea: 220V 60Hz
Other: 110-240V 50/60Hz
Dimensions (W x D x H) 480 x 369 x 88 mm (18-7/8" x 14-1/2" x 3-1/2")
Net Weight NUAGE I/O 16D: 6.4kg(14.1lb)
NUAGE I/O 16A: 6.7kg(14.1lb)
NUAGE I/O 8A8D: 6.7kg(14.8lb)
Included Accessories Power cable, Ferrite core, Ruber stoppers (4), Operation Manual
*1 These characteristics are measured with A-weighting filter and/or 30kHz LPF.

Analog Input Characteristics

Input Terminal Actual Load
Impedance
For Use With
Nominal
GAIN Input level Connector in Console
Nominal Max.before clip
ANALOG INPUT 20kΩ (BAL) 150Ω Lines 0dB +4dBu (1.23 V) +24dBu (12.28V) D-SUB Connector 25P (Female)
+12dB -10dBV (0.32 V) +10dBV (3.16V)
10kΩ (UNBAL) 600Ω Lines 0dB +4dBu (1.23 V) +24dBu (12.28V) D-SUB Connector 25P (Female)
+12 dB -10dBV (0.32 V +10dBV (3.16V)

Analog Output Characteristics

Output Terminal Actual Source Impedance For Use With
Nominal
GAIN SW Output level Connector in Console
Nominal Max.before clip
ANALOG OUTPUT 75Ω(BAL) 10kΩ Lines 0dB +4dBu (1.23 V) +24dBu (12.28V) D-SUB Connector 25P (Female)
-6dB +18dBu (6.16 V)

Digital I/O Characteristics

Terminal Format Data length Level Connector in Console
AES/EBU AES/EBU Professional use 24bit RS422 D-SUB Connector 25P (Female)
Primary/Secondary Dante 24bit 1000Base-T RJ-45 x 2
Cascade - 32bit LVDS*2 RJ-45 x 2

Control I/O Characteristics

Terminal Level Connector in Console
WORD CLOCK IN TTL/75Ω terminated BNC Connector
OUT TTL/75Ω BNC Connector
System Link Out 1.0±0.2Vp-p/75Ω*3 BNC Connector
※2 Hi Speed CML ※3 AES-3id

DANTE Accelerator (AIC128-D)

General Specifications

PCI Express card Compatible with PCI Express x4 slots v1.0 and above
Audio Interface ASIO (Windows 7 / 8.1 / 10)*1 or Core Audio (OS X 10.7.5/ 10.8*2/ 10.9/ 10.10/ 10.11)*1
Audio channels 256 channels (128 in/128 out @ 96 kHz or less)
128 channels (64 in/64 out @ 176.4 kHz or more)
Supported Sample Rates 44.1, 48, 88.2, 96, 176.4, and 192kHz
Pull-up/Pull-down +4.1667, +0.1, -0.1, and - 4.0 %
Sample bit-depth 24 bit
Dante Network interface Gigabit (1000Mbps; 1Gbps) Ethernet RJ45 port x2

*1 When using latest Dante Accelerator Driver
*2 Pull up/down function for the audio sample rate is not supported in OS X 10.8. Noise may occur when pull up/down function is used.

Return to Top

Yamaha Design "Synapses"

Yamaha Design site "Synapses" describes connections between products and concept keywords.

Installation Case

John Penn is an independent film/music composer, 3D sound designer, producer, media-tech entrepreneur, and owner of Undercurrent Labs, the company he founded in 2011.

Installation Case

Bing Bang Boom! In Spokane, WA specializes in integrated music and sound design for film, television, advertising, video games, and the Internet. Their award-winning work can be heard on projects for CBS, ABC, NBC, Spike TV, HBO, Warner Bros. Films, and many blockbuster theatrical trailers.