01V96i Specifications
| Outline | 01V96i | |
|---|---|---|
| Mixing capability | Mixing channels | 32 Mono + 4 Stereo |
| GROUP | 8 | |
| AUX | 8 | |
| MAIN | Stereo | |
| Input channel functions | Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan | |
| Output channel functions | Attenuator, 4-band PEQ, Compressor, Delay | |
| On-board processors | 4x SPX multi effectors | |
| I/O | Mic inputs | 12 |
| Phantom power | +48V DC; ON/OFF per 4ch | |
| Line inputs | 2x Stereo, 2x 2tr in | |
| AD converter | 24-bit; 128-time over sampling | |
| Line outputs | Stereo output, Monitor output, 4x Omni output | |
| DA converter | 24-bit; 128-time over sampling | |
| Digital I/O | ADAT (8-in/8-out), 2tr in/out | |
| Expansion slots | Mini-YGDAI (16-in/16-out) | |
| Control and others | To Host(USB), MIDI, Word clock I/O | |
| General specifications | 01V96i | |
| Internal processing | 32bit, Accumulator: 58bit | |
| Sampling frequency rate | Internal | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| External | 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) | |
| Signal delay | Less than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz) | |
| Total harmonic distortion | CH INPUT to STEREO OUT: Less than 0.05%, 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / Less than 0.05%, 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz) | |
| Frequency response | CH INPUT to STEREO OUT: 0.5, -1.5dB, 20Hz - 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5, -1.5dB, 20Hz - 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz) | |
| Dynamic range | 110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz | |
| Hum & noise level | Equivalent input noise | -128dBu Equivalent Input Noise. |
| Residual output noise | -86dBu residual output noise. STEREO OUT: STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT: STEREO fader at nominal level and all CH INPUT faders at minimum level. / -64dBu (68dB S/N) STEREO OUT: STEREO fader at nominal level and one CH INPUT fader at nominal level | |
| Crosstalk | -80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output | |
| Power requirements | AC100V, 120V, 220-240V 50/60 Hz | |
| Power consumption | 90W | |
| Dimensions | W | 436mm; 17-1/8in |
| H | 148mm; 5-7/8in | |
| D | 548mm; 21-5/8in | |
| Net weight | 14kg; 30.86lbs | |
| Others | Fader: 100mm motorized x17 | |
Analog input characteristics
| Input terminal | PAD | GAIN | Actual load impedance | For use with nominal | Input level | Connector | ||
|---|---|---|---|---|---|---|---|---|
| Sensitivity | Nominal | Max. before clip | ||||||
| CH INPUT 1 to 12 |
0 | -60dB | 3kohms | 50-600ohm Mics & 600ohm Lines | -70dBu | -60dBu | -40dBu | A:XLR-3-31 type (Balanced) B:TRS phone jack (Balanced) |
| -16dB | -26dBu | -16dBu | +4dBu | |||||
| 20 | -6dBu | +4dBu | +24dBu | |||||
| CH INPUT 13 to 16 |
-26dB | 10kohms | 600ohm Lines | -36dBu | -26dBu | -6dBu | TRS phone jack (Balanced) | |
| +4dB | -6dBu | +4dBu | +24dBu | |||||
| CH INSERT IN 1 to 12 | 10kohms | 600ohm Lines | -12dBu | -2dBu | +18dBu | TRS phone jack (Unbalanced) | ||
| 2TR IN [L,R] | 10kohms | 600ohm Lines | -10dBV | -10dBV | +10dBV | RCA pin jack (Unbalanced) | ||
Analog output characteristics
| Output terminal | Actual source impedance | For use with nominal | Output level | Connector | |
|---|---|---|---|---|---|
| Nominal | Max. before clip | ||||
| STEREO OUT L,R | 75ohms | 600ohm Lines | +4dBu | +24dBu | XLR-3-32 type (Balanced) |
| OMNI OUT 1 to 4 | 150ohms | 10kohm Lines | +4dBu | +24dBu | TRS phone jack (Balanced) |
| MONITOR OUT L,R | 150ohms | 10kohm Lines | +4dBu | +24dBu | TRS phone jack (Balanced) |
| CH INSERT OUT 1 to 12 | 600ohms | 10kohm Lines | -2dBu | +18dBu | TRS phone jack (Unbalanced) |
| 2TR OUT [L,R] | 600ohms | 10ohm Lines | -10dBV | +10dBV | RCA pin jack (Unbalanced) |
| PHONES | 100ohms | 8ohm Lines | 4mW | 25mW | ST phone jack (Unbalanced) |
| 40ohm Lines | 12mW | 75mW | |||
Digital input characteristics
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| 2TR IN DIGITAL | IEC-60958 | 24bit | 0.5Vpp/75ohms | RCA pin jack |
| ADAT IN | ADAT | 24bit | - | OPTICAL |
Digital output characteristics
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| 2TR OUT DIGITAL | IEC-60958 Consumer use |
24bit | 0.5Vpp/75ohms | RCA pin jack |
| ADAT OUT | ADAT | 24bit | - | OPTICAL |
Digital input/output characteristics
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| USB | USB2.0 | 24bit | - | B type USB connector |
Control I/O characteristics
| Terminal | Format | Level | Connector | |
|---|---|---|---|---|
| TO HOST USB | USB | 0V - 3.3V | B type USB connector | |
| MIDI | IN | MIDI | - | DIN Connector 5P |
| OUT | MIDI | - | DIN Connector 5P | |
| THRU | MIDI | - | DIN Connector 5P | |
| WORD CLOCK | IN | - | TTL/75ohms | BNC Connector |
| OUT | - | TTL/75ohms | BNC Connector | |
Installation Case
Satellite broadcaster Sky TV continues to expand, thanks to its wide broadcasting remit and, in particular, it’s high quality sports coverage. This has recently seen the company boost its already impressive collection of Yamaha digital mixing consoles to a remarkable 46.
