01V96VCM Specifications
| Outline | 01V96VCM | |
|---|---|---|
| Mixing capability | Mixing channels | 32 Mono + 4 Stereo |
| GROUP | 8 | |
| AUX | 8 | |
| MAIN | Stereo | |
| Input channel functions | Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan | |
| Output channel functions | Attenuator, 4-band PEQ, Compressor, Delay | |
| On-board processors | 4x SPX multi effectors | |
| I/O | Mic inputs | 12 |
| Phantom power | +48V DC; ON/OFF per 4ch | |
| Line inputs | 2x Stereo, 2x 2tr in | |
| AD converter | 24-bit; 128-time over sampling | |
| Line outputs | Stereo output, Monitor output, 4x Omni output | |
| DA converter | 24-bit; 128-time over sampling | |
| Digital I/O | ADAT (8-in/8-out), 2tr in/out | |
| Expansion slots | Mini-YGDAI (16-in/16-out) | |
| Control and others | To Host(USB), MIDI, Word clock I/O | |
| General specifications | 01V96VCM | |
| Internal processing | 32bit, Accumulator: 58bit | |
| Sampling frequency rate | Internal | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| External | 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) | |
| Signal delay | Less than 1.6ms (@48kHz), Less than 0.8ms (@96kHz) | |
| Total harmonic distortion | Less than 0.05% (20Hz-40kHz) | |
| Frequency response | 0, +0.5, -1.5dB 20Hz-40kHz | |
| Dynamic range | DA: 110dB; AD+DA: 105dB | |
| Hum & noise level | Equivalent input noise | -128dBu |
| Residual output noise | -86dBu | |
| Crosstalk | -80dB | |
| Power requirements | AC100V, 120V, 220-240V 50/60 Hz | |
| Power consumption | 90W | |
| Dimensions | W | 436mm; 17-3/16in |
| H | 150mm; 5-7/8in | |
| D | 548mm; 21-9/16in | |
| Net weight | 15kg; 33.1lbs | |
| Accessories | Owner’s Manual, Studio Manager Installation Guide, AC power cord | |
Analog input characteristics
| Input terminal | PAD | GAIN | Actual load impedance | For use with nominal | Input level | Connector | ||
|---|---|---|---|---|---|---|---|---|
| Sensitivity | Nominal | Max. before clip | ||||||
| CH INPUT 1 to 12 |
0 | -60dB | 3kohms | 50-600ohm Mics & 600ohm Lines | -70dB | -60dB | -40dB | A:XLR-3-31 type (Balanced) B:TRS phone jack (Balanced) |
| -16dB | -26dB | -16dB | +4dB | |||||
| 20 | -6dB | +4dB | +24dB | |||||
| CH INPUT 13 to 16 |
-26dB | 10kohms | 600ohm Lines | -36dB | -26dB | -6dB | TRS phone jack (Balanced) | |
| +4dB | -6dBV | +4dB | +24dB | |||||
| CH INSERT IN 1 to 12 | 10kohms | 600ohm Lines | -6dB | +4dB | +24dB | TRS phone jack (Unbalanced) | ||
| 2TR IN [L,R] | 10kohms | 600ohm Lines | -10dB | -10dB | +10dB | RCA pin jack (Unbalanced) | ||
Analog output characteristics
| Output terminal | Actual source impedance | For use with nominal | Output level | Connector | |
|---|---|---|---|---|---|
| Nominal | Max. before clip | ||||
| STEREO OUT L,R | 75ohms | 600ohm Lines | +4dB | +24dB | XLR-3-32 type (Balanced) |
| OMNI OUT 1 to 4 | 150ohms | 10kohm Lines | +4dB | +24dB | TRS phone jack (Balanced) |
| MONITOR OUT L,R | 150ohms | 10kohm Lines | +4dB | +24dB | TRS phone jack (Balanced) |
| CH INSERT OUT 1 to 12 | 600ohms | 10kohm Lines | +4dB | +24dB | TRS phone jack (Unbalanced) |
| 2TR OUT [L,R] | 10Kohms | 600ohm Lines | -10dBV | +10dBV | RCA pin jack (Unbalanced) |
| PHONES | 100ohms | 8ohm Lines | 4mW | 25mW | ST phone jack (Unbalanced) |
| 40ohm Lines | 12mW | 75mW | |||
Digital input characteristics
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| 2TR IN DIGITAL | IEC-60958 | 24bit | 0.5Vpp/75ohms | RCA pin jack |
| ADAT IN | ADAT *1 | 24bit | - | OPTICAL |
Analog input characteristics
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| 2TR OUT DIGITAL | IEC-60958 Consumer use |
24bit | 0.5Vpp/75ohms | RCA pin jack |
| ADAT OUT | ADAT | 24bit | - | OPTICAL |
Control I/O characteristics
| Terminal | Format | Level | Connector | |
|---|---|---|---|---|
| TO HOST USB | USB | 0V - 3.3V | B type USB connector | |
| MIDI | IN *1 | MIDI | - | DIN Connector 5P |
| OUT | MIDI | - | DIN Connector 5P | |
| THRU | MIDI | - | DIN Connector 5P | |
| WORD CLOCK | IN | - | TTL/75ohms | BNC Connector |
| OUT | - | TTL/75ohms | BNC Connector | |
*1. MIDI IN can use as TIME CODE IN MTC.








