Print This Page

MGP32X / MGP24X Specifications

OutlineMGP32XMGP24X
Mixing capabilityMixing channels32 Line Inputs (24 mono and 4 stereo)24 Line Inputs (16 mono and 4 stereo)
GROUP4 GROUP Buses + ST Bus4 GROUP Buses + ST Bus
AUX6 AUX Sends + 2 FX Sends6 AUX Sends + 2 FX Sends
MATRIX1 Matrix out1 Matrix out
On-board processorsFX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)
I/OMic inputsMIC: 24 (INPUTS HPF: 100Hz 12dB/oct)MIC: 16 (INPUTS HPF: 100Hz 12dB/oct)
Phantom power48V phantom power per channel48V phantom power per channel
Line inputsLINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereoLINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo
Digital I/OUSB Device, iPod / iPhoneUSB Device, iPod / iPhone
General specificationsMGP32XMGP24X
Total harmonic distortion0.02% (20Hz-20kHz@ +14dBu)0.02% (20Hz-20kHz@ +14dBu)
Frequency response+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise levelEquivalent input noise-128 dBu Equivalent Input Noise-128 dBu Equivalent Input Noise
Residual output noise-94 dBu Residual Output Noise-94 dBu Residual Output Noise
Crosstalk-74dB @ 1kHz-74dB @ 1kHz
Power requirements100-240V 50Hz/60Hz100-240V 50Hz/60Hz
Power consumption86W max86W max
DimensionsW1,027mm (40.4")819mm (32.2")
H169mm (6.7")169mm (6.7")
D565mm (22.2")565mm (22.2")
Net weight19kg (41.9lb)15.5kg (34.2lb)

MGP16X / MGP12X Specifications

OutlineMGP16XMGP12X
Mixing capabilityMixing channels16 Line Inputs (8 mono and 4 stereo)12 Line Inputs (4 mono and 4 stereo)
GROUP4 GROUP Buses + ST Bus4 GROUP Buses + ST Bus
AUX2 AUX Sends + 2 FX Sends2 AUX Sends + 2 FX Sends
Input channel functionsCompressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelvingCompressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
On-board processorsFX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
I/OMic inputsMIC: 10MIC:6 (100Hz 12dB/oct)
Phantom power48V phantom power per channel48V phantom power per channel
Line inputsLINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereoLINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo
Digital I/OUSB Audio USB IN: iPod, iPhone exclusiveUSB Audio USB IN: iPod, iPhone exclusive
General specificationsMGP16XMGP12X
Total harmonic distortion0.02% (20Hz-20kHz@ +14dBu)0.02% (20Hz-20kHz@ +14dBu)
Frequency response+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise levelEquivalent input noise-128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)-128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Residual output noise-102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)-102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Crosstalk-74dB @ 1kHz-74dB @ 1kHz
Power requirements100-240V 50Hz/60Hz100-240V 50Hz/60Hz
Power consumption55W max45W max
DimensionsW447mm348mm
H143mm143mm
D495mm495mm
Net weight9.0kg7.5kg

Analog input specifications

Input terminal Actual source
impedance
For use with
nominal
Input level Connector
  PAD GAIN Sensitivity*1 Nominal Max.
before clip
MONO CH INPUT
MGP32X: 1–24
MGP24X: 1–16
0 -60dB 3kΩ 50-600Ω
Mics
-80 dBu
(0.078 mV)
-60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
XLR-3-31 type*2
Phone jack*4
-16dB -36 dBu
(12.3 mV)
-16 dBu
(123 mV)
+4 dBu
(1.23 V)
26dB -34dB 600Ω
Lines
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
Phone jack*3
+10dB -10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
STEREO CH INPUT
MGP32X: 25–32
MGP24X: 17–24
-34dB 10kΩ 600Ω
Lines
-54 dBu
(1.55 mV)
-34 dBu
(15.5 mV)
-14 dBu
(155 mV)
Phone jack*4
RCA Pin Jack
+10dB -10 dBu
(245 mV)
+10 dBu
(2.45 V)
+30 dBu
(24.5 V)
MONO CH INSERT INPUT
MGP32X: 1–24
MGP24X: 1–16
10kΩ 600Ω
Lines
-20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone Jack*5
ST CH INSERT INPUT L,R 10kΩ 600Ω
Lines
-20 dBu
(77.5 mV)
0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone Jack*5
TALKBACK INPUT 10kΩ 50-600Ω
Mics
-66 dBu
(0.389 mV)
-50 dBu
(2.45 mV)
-30 dBu
(24.5 mV)
XLR-3-31 type*6

0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.

Analog output specifications

Output terminal Actual source
impedance
For use with
nominal
Output level Connector
Nominal Max. before clip
ST OUT [L,R] 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type*1
Phone jack*4
MONO OUT 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type*1
GROUP OUT (1-4) 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack*2
AUX SEND (1-6) 75Ω 600Ω Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR3-32 type*1
MATRIX OUT (1, 2) 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack*2
MONO CH INSERT OUT
MGP32X: 1–24
MGP24X: 1–16
75Ω 10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack*3
ST CH INSERT OUT [L,R] 75Ω 10kΩ Lines 0 dBu
(0.775 V)
+20 dBu
(7.75 V)
Phone jack*3
MONITOR OUT [L,R] 150Ω 10kΩ Lines +4 dBu
(1.23 V)
+20 dBu
(7.75 V)
Phone jack*2
PHONES OUT 150Ω 40Ω Phones 3mW 75mW ST Phone Jack

0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)

Return to Top

MGP Editor

MGP Editor is a free software application that gives you additional control of your MGP mixer's DSP settings via your iPhone, iPod touch, and iPad.

Yamaha Design "Synapases"

Yamaha Design site "Synapses" describes connections between products and concept keywords.