Print This Page

RIVAGE PM10

General Specifications

Mixing Capacity

44.1/48/88.2/96 kHz
144 input channels, 72 Mix buses, 36 Matrix buses
Stereo buses A and B (or Mono bus), Cue A/B, Monitor A/B

Input Channel

A/B, Gain Compensation, Digital Gain, HPF, LPF, 4-band PEQ, 2 Dynamics, Delay, 2 insert points (x4 daisy-chain), Direct Out

Output Channel

HPF, LPF, 8-band PEQ, Dynamics, Delay (on channel and port), 2 insert points (x4 daisy-chain)

Scene Memory

Number of scenes: 1000
Functions: Recall Safe, Focus Recall, Fade Time, Preview, Overlay Filter, Isolate

DCA/Mute Group

24 DCAs, 12 Mute Groups

Plug-ins

384 plug-in slots (The maximum number of plug-ins used at a time varies depending on the plug-in types)
45 types of plug-ins

GEQ/PEQ

48 racks (96 for Flex15GEQ and 8-band PEQ)
31-band GEQ, Flex15GEQ, 8-band PEQ

Recording

2-track USB recording (MP3 and WAV)
Multitrack recording and Virtual Soundcheck via Dante (option)

I/O Network (TWINLANe)

400 channels @ 44.1/48/88.2/96 kHz, 32-bit
Network latency: 11 samples at 44.1/48 kHz, 12 samples at 88.2/96 kHz
Topology: ring for network redundancy
Recommended cable: Neutrik opticalCON DUO multimode fiber (HY256-TL) or Neutrik opticalCON DUO singlemode fiber (HY256-TL-SMF)

Console Network

Topology: ring for network redundancy
Cable: CAT5e or better (etherCON)

Products Specifications

CS-R10 Control Surface

The control surface with two large touch panel displays and 38 faders enables you to perform general operations on the RIVAGE PM10 system.

  • Display: 15" touch panel x 2
  • Faders: 38 (12+12+12+2)
  • Selected Channel section: Comprehensive channel parameters
  • Custom Fader banks: 6 x 2 on each bay
  • User Defined keys: 12 x 4 banks
  • User Defined knobs: 4 x 4 banks
  • Touch and Turn knobs: 2
  • Analog I/O: 8 in / 8 out
  • Slot: 2 MY slots
  • AES/EBU: 4 in / 4 out (with SRC)
  • Ports: GPI (8 in / 8 out), Word Clock Out, MIDI In/Out, 5 USB (1 for 2-track recording), Video Out (DVI-D)
  • Power supply: Dual redundant power supply built-in

CS-R10-S Control Surface

The control surface with single large touch panel display and 26 faders enables you to perform general operations on the RIVAGE PM10 system.

  • Display: 15" touch panel x 1
  • Faders: 26 (12+12+2)
  • Selected Channel section: Comprehensive channel parameters
  • Custom Fader banks: 6 x 2 on each bay
  • User Defined keys: 12 x 4 banks
  • User Defined knobs: 4 x 4 banks
  • Touch and Turn knobs: 1
  • Analog I/O: 8 in / 8 out
  • Slot: 2 MY slots
  • AES/EBU: 4 in / 4 out (with SRC)
  • Ports: GPI (8 in / 8 out), Word Clock Out, MIDI In/Out, 5 USB (1 for 2-track recording), Video Out (DVI-D)
  • Power supply: Dual redundant power supply built-in

DSP-R10 DSP Engine

The DSP-R10 is a powerful DSP engine that serves as the core for signal processing and system control required for the RIVAGE PM10 system.

  • Superior capability of processing digital audio signals of up to 144 input, 72 MIX, 36 MATRIX, and two STEREO channels.
  • Four HY card slots that are capable of transmitting/receiving up to 256 ins/outs of digital audio signals/control signals.
  • Two Mini-YGDAI slots to support various audio formats.
  • Dual redundant power supply built-in.

RPio622 I/O Rack

The RPio622 is an audio interface that enables you to flexibly configure and expand I/Os for the RIVAGE PM10 system as required by your application or the scale of your system.

  • Six RY card slots that enable you to expand analog inputs and outputs, and/or digital inputs and outputs.
  • Two HY card slots that are capable of transmitting/receiving up to 256 ins/outs of digital audio signals/control signals.
  • HY card slot 1 features 256 ins/outs, and HY card slot 2 features 128 ins/outs.
  • Two mini-YGDAI slots to support various audio formats.
  • Dual redundant power supply built-in.

RPio222 I/O Rack

The RPio222 is an audio interface that enables you to flexibly configure and expand I/Os for the RIVAGE PM10 system as required by your application or the scale of your system.

  • Two RY card slots that enable you to expand analog inputs and outputs, and/or digital inputs and outputs.
  • Two HY card slots that are capable of transmitting/receiving up to 256 ins/outs of digital audio signals/control signals.
  • HY card slot 1 features 256 ins/outs, and HY card slot 2 features 128 ins/outs.
  • Two mini-YGDAI slots to support various audio formats.
  • Dual redundant power supply built-in.

RY16-ML-SILK Audio Interface Card

The RY16-ML-SILK is a 16-channel mic/line input card that supports a 96 kHz sampling rate. It features a new revolutionary analog mic preamp combined with Silk processing from Rupert Neve Designs, which allows you to freely control depth and perspective through modeling in the digital domain. Each input connector can supply phantom power (+48V DC).

  • 16-channel mic/line input.
  • SILK digital processing technology that has been co-developed by Rupert Neve Designs and Yamaha.

RY16-DA Audio Interface Card

The RY16-DA is a 16-channel analog output card that supports a 96 kHz sampling rate. You can use the switches on the board to set maximum output level to +15dBu, +18dBu, or +24dBu. The factory setting is +24dBu.

  • 16-channel analog outputs.

RY16-AE Audio Interface Card

The RY16-AE is a 16-channel digital I/O card that supports the AES/EBU format. Sampling rate converters (SRC) are provided for each of the 16 input channels and 16 output channels.

  • AES/EBU 16-channel digital I/Os.
  • Sampling rate converter for both inputs and outputs.

HY256-TL Audio Interface Card

The HY256-TL is a digital I/O card for HY card slots, and compatible with Yamaha’s TWINLANe audio network protocol. The card supports multi-mode fiber connections for reliable operation.

  • Can send/receive uncompressed digital audio signals of 32-bit 96 kHz quality, with a maximum of 256 inputs/256 outputs.
  • Redundant connections are supported with ring topology.
  • Indicators show communication status useful for troubleshooting.
  • Recommended cable: Neutrik opticalCON DUO multi-mode fiber

HY256-TL-SMF Audio Interface Card

The HY256-TL-SMF is a digital I/O card for HY card slots, and compatible with Yamaha’s TWINLANe audio network protocol. The card supports single-mode fiber connections for reliable operation over long distances.

  • Can send/receive uncompressed digital audio signals of 32-bit 96 kHz quality, with a maximum of 256 inputs/256 outputs.
  • Redundant connections are supported with ring topology.
  • Indicators show communication status useful for troubleshooting.
  • Recommended cable: Neutrik opticalCON DUO single-mode fiber

HY144-D Audio Interface Card

The HY144-D is a digital I/O card for HY card slots, and is compatible with the Dante digital audio network over Gigabit Ethernet connections.

  • Can send and receive uncompressed digital audio signals of 32-bit 96 kHz quality, with a maximum of 144 inputs/144 outputs.
  • Redundant connections are supported with primary and secondary connectors. Daisy chain connections are also supported.
  • Indicators show communication status useful for troubleshooting.

Return to TopReturn to Top