Print This Page

STAGEPAS 400BT/600BT

OutlineSTAGEPAS 400BTSTAGEPAS 600BT
TypePowered mixer with 2 passive speakersPowered mixer with 2 passive speakers
Mixing capabilityMixing channels810
Input channel functionsHi-Z switch: CH4, ST/MONO switch: CH5/6-7/8Hi-Z switch: CH4, ST/MONO switch: CH5/6-9/10
Output channel functionsFeedback suppressor, 1-Knob Master EQ™Feedback suppressor, 1-Knob Master EQ™
I/OInputs4 mono mic / line + 4 mono / 2 stereo line4 mono mic / line + 6 mono / 3 stereo line
Phantom power+30V (CH1, 2)+30V (CH1, 2)
OutputsSPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPFSPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
BluetoothBluetooth Ver.4.1, A2DP v1.2, Maximum Range: Approx. 10 mBluetooth Ver.4.1, A2DP v1.2, Maximum Range: Approx. 10 m
Control and othersReverb foot switchReverb foot switch
Input Channel FunctionHi-ZCH4CH4
EQ HIGHHIGH Shelving: 8 kHzHIGH Shelving: 8 kHz
EQ LOWLOW Shelving: 100 HzLOW Shelving: 100 Hz
EQ MID-MID peaking: 2.5 kHz
On-board processorsDSPSPX digital reverb (4 program, parameter control)SPX digital reverb (4 program, parameter control)
On-board amplifiersMaximum output power @4ohms400W (200 W + 200 W) (Dynamic), 360W (180W + 180W) (Continuous)680W (340 W + 340 W) (Dynamic), 560W (280W + 280W) (Continuous)
General specificationsSTAGEPAS 400BTSTAGEPAS 600BT
Speaker typeTwo-way bass-relfex speakersTwo-way bass-relfex speakers
Frequency range (-10dB)55 Hz - 20 kHz55 Hz - 20 kHz
Nominal coverageH90°90°
V60°60°
Floor Monitor Angle50°50°
ComponentsLF8" (20 cm) cone10" (25 cm) cone
HF1" (2.54 cm) voice coil compression driver1.4" (3.56 cm) voice coil compression driver
Maximum output level (1m; on axis)125 dB SPL / speaker129 dB SPL / speaker
Power requirements100 V - 240 V 50 Hz/60 Hz100 V - 240 V 50 Hz/60 Hz
Power consumption30 W (Idle), 70 W (1/8 Power)35 W (Idle), 100 W (1/8 Power)
Pole socket34.8-35.2 mm pole socket with StageLok™34.8-35.2 mm pole socket with StageLok™
AccessoriesCover panel, Power cord (2m), 2 x Speaker cables (6m), 12 x Non-skid pads, 2 x Ferrite Cores, 2 x Cable tiesCover panel, Power cord (2m), 2 x Speaker cables (6m), 12 x Non-skid pads, 2 x Ferrite Cores, 2 x Cable ties
OptionsYamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFFYamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFF
OthersHandle: 1 x TopHandle: 1 x Top
Dimensions (W x H x D)Speaker 289 x 472 x 275 mm, Mixer 308 x 180 x 116 mmSpeaker 335 x 545 x 319 mm, Mixer 348 x 197 x 135 mm
Weight18.3 kg (40.3 lbs) (2 x Speaker 7.7kg + Mixer 2.9kg)25.6 kg (56.4lbs) (2 x Speaker 10.9 kg + Mixer 3.8 kg)

Return to Top