Print This Page

Specifications

System

Model STAGEPAS 400i STAGEPAS 600i
System Type Powered mixer with 2 passive speakers
Maximum SPL (*Maximum SPL) 125dB SPL / speaker 129dB SPL / speaker
Frequency Range (-10 dB) 55Hz - 20kHz 55Hz - 20kHz
Power Consumption 30W (Idle), 70W (1/8 Power) 35W (Idle), 100W (1/8 Power)
Power Requirements 100V - 240V 50Hz/60Hz
Dimentions (W x H x D) Speaker 289x472x275mm, Mixer 308x180x116mm Speaker 335x545x319mm, Mixer 348x197x135mm
Net Weight 17.8kg / 39.2lbs (2 x Speaker 7.5kg + Mixer 2.8kg) 25.4kg / 56lbs (2 x Speaker 10.8kg + Mixer 3.8kg)

Powered Mixer

Model STAGEPAS 400i STAGEPAS 600i
Mixer Mixing channels 8 10
Analog inputs 4 mono mic/line + 4 mono / 2 stereo line 4 mono mic/line + 6 mono / 3 stereo line
Digital inputs USB Audio IN: iPod/iPhone exclusive *
Channel EQ 2-band (HIGH Shelving: 8kHz, LOW Shelving: 100Hz) 3-band (HIGH Shelving: 8kHz, MID peaking: 2.5kHz, LOW Shelving: 100Hz)
Channel functions Hi-Z switch: CH4, ST/MONO switch: CH5/6-7/8 Hi-Z switch: CH4, ST/MONO switch: CH5/6-9/10
Digital effects SPX digital reverb (4 program, parameter control)
Output processing Feedback suppressor, 1-Knob Master EQ™
Phantom power +30V (CH1, 2)
Outputs SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF
Control and others Reverb foot switch
Built-in Amplifiers Power Rating (Dynamic) 400W (200W + 200W) 680W (340W + 340W)
Power Rating (Continuous) 360W (180W + 180W) 560W (280W + 280W)

* Supported iPod/iPhone models.
iPod classic/ iPod touch (1st generation or later)/ iPod nano (2nd generation or later)/ iPhone (1st generation or later)


Speaker

Model STAGEPAS 400i STAGEPAS 600i
Type Two-way bass-relfex speakers
Transducers LF: 8” (20cm) cone, HF: 1” (2.54cm) voice coil compression driver LF: 10” (25cm) cone, HF: 1.4” (3.56cm) voice coil compression driver
Coverage Angle (Horizontal x Vertical) 90° x 60°
Floor Monitor Angle 50°
Handle 1 x Top
Pole socket 34.8-35.2mm pole socket with StageLok™

Accessories

Model STAGEPAS 400i STAGEPAS 600i
Included Accessories Cover panel, Power cord (2m), 2xSpeaker cables (6m), 12xNon-skid pads
Optional Accessories Yamaha BMS10A (mic stand adaptor) for mixer mount, FC5 (foot switch) for reverb ON/OFF

Input Characteristics

STAGEPAS400i

Input Terminals MIC/LINE Input
Impedance
Source
Impedance
Input Level Connector
Type
Sensitivity Nominal Max. before
Clipping
CH IN 1-2 XLR MIC 3 kΩ 150 Ω Mics -56 dBu
-35 dBu
-10 dBu
XLR-3-31
LINE -30 dBu -9 dBu +16 dBu
CH IN 3-4 XLR MIC 3 kΩ 150 Ω Mics -56 dBu
-35 dBu
-10 dBu
XLR Combo
LINE -30 dBu -9 dBu +16 dBu
Phone MIC 10 kΩ
(Hi-Z 1 MΩ)
150 Ω Lines
(Hi-Z 10 kΩ)
-50 dBu
-29 dBu
-4 dBu
LINE -24 dBu -3 dBu +22 dBu
CH IN 5/6 Phone - 10 kΩ 150 Ω Lines -24 dBu
-3 dBu
+22 dBu
Phone*
Pin - 10 kΩ 150 Ω Lines -24 dBu -3 dBu +22 dBu
RCA Pin
CH IN 7/8 Phone - 10 kΩ 150 Ω Lines -24 dBu
-3 dBu
+22 dBu
Phone*
Mini - 10 kΩ 150 Ω Lines -24 dBu -3 dBu +22 dBu
Stereo Mini

STAGEPAS600i

Input Terminals MIC/LINE Input
Impedance
Source
Impedance
Input Level Connector
Type
Sensitivity Nominal Max. before
Clipping
CH IN 1-2 XLR MIC 3 kΩ 150 Ω Mics -56 dBu
-35 dBu
-10 dBu
XLR-3-31
LINE -30 dBu -9 dBu +16 dBu
CH IN 3-4 XLR MIC 3 kΩ 150 Ω Mics -56 dBu
-35 dBu
-10 dBu
XLR Combo
LINE -30 dBu -9 dBu +16 dBu
Phone MIC 10 kΩ
(Hi-Z 1 MΩ)
150 Ω Lines
(Hi-Z 10 kΩ)
-50 dBu
-29 dBu
-4 dBu
LINE -24 dBu -3 dBu +22 dBu
CH IN 5/6 Phone - 10 kΩ 150 Ω Lines -24 dBu
-3 dBu
+22 dBu
Phone*
CH IN 7/8 Phone - 10 kΩ 150 Ω Lines -24 dBu
-3 dBu
+22 dBu
Phone*
Pin - 10 kΩ 150 Ω Lines -24 dBu -3 dBu +22 dBu
RCA Pin
CH IN 9/10 Phone - 10 kΩ 150 Ω Lines -24 dBu
-3 dBu
+22 dBu
Phone*
Mini - 10 kΩ 150 Ω Lines -24 dBu -3 dBu +22 dBu
Stereo Mini

0 dBu=0.775 Vrms, 0 dBV=1 Vrms Phone*: Unbalanced

Output Characteristics

STAGEPAS400i

Output Terminals Output
Impedance
Load
Impedance
Output Level Connector
Type
Nominal Max. before
Clipping
Typ at
THD+N 10%
Dynamic
SPEAKERS OUT [L,R] <0.1 Ω 4Ω Speakers - -
180 W
200 W
Phone*
MONITOR OUT [L,R] 600 Ω 10 kΩ Lines +4 dBu +20 dBu - -
Phone*
SUBWOOFER OUT 150 Ω 10 kΩ Lines -3 dBu +17 dBu - -
Phone*

STAGEPAS600i

Output Terminals Output
Impedance
Load
Impedance
Output Level Connector
Type
Nominal Max. before
Clipping
Typ at
THD+N 10%
Dynamic
SPEAKERS OUT [L,R] <0.1 Ω 4Ω Speakers - -
280 W
340 W
Phone*
MONITOR OUT [L,R] 600 Ω 10 kΩ Lines +4 dBu +20 dBu - -
Phone*
SUBWOOFER OUT 150 Ω 10 kΩ Lines -3 dBu +17 dBu - -
Phone*

0 dBu=0.775 Vrms, 0 dBV=1 Vrms Phone*: Unbalanced

Return to Top