Print This Page

XMV4280, XMV4140, XMV4280-D, XMV4140-D

Model XMV4280 XMV4140 XMV4280-D XMV4140-D
Output Power 1kHz, THD+N = 1% (20 ms Burst) 280W x 4 140W x 4 280W x 4 140W x 4
280W x 4 140W x 4 280W x 4 140W x 4
4Ω/ Double Power Mode 560W x 2 280W x 2 560W x 2 280W x 2
8Ω/ Double Power Mode 560W x 2 280W x 2 560W x 2 280W x 2
High impedance 100V line 250W x 4 / 40 Ω 125W x 4 / 80 Ω 250W x 4 / 40 Ω 125W x 4 / 80 Ω
70V line 250W x 4 / 20 Ω 125W x 4 / 40 Ω 250W x 4 / 20 Ω 125W x 4 / 40 Ω
Voltage Gain RL=8Ω 31.7dB 28.7dB 31.7dB 28.7dB
RL=8Ω / Double Power Mode 34.7dB 31.7dB 34.7dB 31.7dB
100V 38.2dB 38.2dB 38.2dB 38.2dB
70V 35.2dB 35.2dB 35.2dB 35.2dB
Input Sensitivity RL=8Ω +4dBu
S/N Ratio A-weighted ≥ 100dB
Power Consumption 1/8 power (4 Ω pink noise) 250W 150W 250W 150W
Idle (4 Ω) 37W 37W 37W 37W
Standby 18.5W 18.5W 18.5W 18.5W
THD+N 1kHz, half power ≤ 0.2%
Frequency Response RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz 0dB, ±1.0dB
Crosstalk 1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt ≤ -60dB
Maximum Input Level +24dBu
Input Impedance 20kΩ (balanced), 10k Ω (unbalanced)
Connectors Analog Input Euroblock x 2 (6P, balanced)
Digital Input / Output RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY)
Speaker Output Barrier strip x 4 pairs
Network RJ45 x 1 Shared with Dante ports
Remote, Fault Output Euroblock (3P) x 1
AC IN AC Inlet x 1
Protection circuit Load Protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier Protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically),
Low load impedance: Output mute (Restored automatically)
Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) ,
Integrated power: Gain reduction (Restored automatically)
Cooling Fan 3-Speed fan x 2, front-to-back airflow
Power Requirements 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions W 480mm (18.9")
H 88mm (3.5")
D 422mm (16.6")
Weight 8.1kg (17.9lbs)

XMV8280, XMV8140, XMV8280-D, XMV8140-D

Model XMV8280 XMV8140 XMV8280-D XMV8140-D
Output Power 1kHz, THD+N = 1% (20 ms Burst) 280W x 8 140W x 8 280W x 8 140W x 8
280W x 8 140W x 8 280W x 8 140W x 8
4Ω/ Double Power Mode 560W x 4 280W x 4 560W x 4 280W x 4
8Ω/ Double Power Mode 560W x 4 280W x 4 560W x 4 280W x 4
High impedance 100V line 250W x 8 / 40 Ω 125W x 8 / 80 Ω 250W x 8 / 40 Ω 125W x 8 / 80 Ω
70V line 250W x 8 / 20 Ω 125W x 8 / 40 Ω 250W x 8 / 20 Ω 125W x 8 / 40 Ω
Voltage Gain RL=8Ω 31.7dB 28.7dB 31.7dB 28.7dB
RL=8Ω / Double Power Mode 34.7dB 31.7dB 34.7dB 31.7dB
100V 38.2dB 38.2dB 38.2dB 38.2dB
70V 35.2dB 35.2dB 35.2dB 35.2dB
Input Sensitivity RL=8Ω +4dBu
S/N Ratio A-weighted ≥ 100dB
Power Consumption 1/8 power (4 Ω pink noise) 450W 250W 450W 250W
Idle (4 Ω) 73W 73W 73W 73W
Standby 23W 23W 23W 23W
THD+N 1kHz, half power ≤ 0.2%
Frequency Response RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz 0dB, ±1.0dB
Crosstalk 1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt ≤ -60dB
Maximum Input Level +24dBu
Input Impedance 20kΩ (balanced), 10k Ω (unbalanced)
Connectors Analog Input Euroblock x 2 (6P, balanced)
Digital Input / Output RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY)
Speaker Output Barrier strip x 8 pairs
Network RJ45 x 1 Shared with Dante ports
Remote, Fault Output Euroblock (3P) x 1
AC IN AC Inlet x 1
Protection circuit Load Protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Amplifier Protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically),
Low load impedance: Output mute (Restored automatically)
Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) ,
Integrated power: Gain reduction (Restored automatically)
Cooling Fan 3-Speed fan x 2, front-to-back airflow
Power Requirements 100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions W 480mm (18.9")
H 88mm (3.5")
D 422mm (16.6")
Weight 10.1kg (22.3lbs)

Return to Top

Installation Case

Intec Systems recently completed major upgrades to the audio systems of two of New Zealand’s largest churches. Both installations were required to be easily re-configured depending on the requirements of each service with Dante providing the ideal connectivity solution.

Installation Case

As one of the UK’s major trade distributors of professional audio, lighting, video and special effects, Leighton Buzzard-based Leisuretec invests considerable time in training, seminars, product demonstrations and meetings with both clients and suppliers. The company has recently opened the TecZone, a new in-house space to facilitate all these and more, with Yamaha’s CIS series chosen for its 7.1 surround system.