Print This Page

DME8i-C, DME8o-C, DME4io-C, DME8i-ES, DME8o-ES, DME4io-ES

Please select 3 products to compare.

  • DME8i-C
  • DME8o-C
  • DME4io-C
  • DME8i-ES
  • DME8o-ES
  • DME4io-ES
OutlineDME8i-CDME8o-CDME4io-CDME8i-ESDME8o-ESDME4io-ES
I/OMic inputs8 (Remote HA)-4 (Remote HA)8 (Remote HA)-4 (Remote HA)
Phantom power+48V DC; ON/OFF: per channel-+48V DC; ON/OFF: per channel+48V DC; ON/OFF: per channel-+48V DC; ON/OFF: per channel
AD converter24-bit; 128-time over sampling-24-bit; 128-time over sampling24-bit; 128-time over sampling-24-bit; 128-time over sampling
Digital I/OCobraNet (16-in/16-out)CobraNet (16-in/16-out)CobraNet (16-in/16-out)EtherSound (16-in/16-out)EtherSound (16-in/16-out)EtherSound (16-in/16-out)
Line outputs-84-84
DA converter-24-bit; 128-time over sampling24-bit; 128-time over sampling-24-bit; 128-time over sampling24-bit; 128-time over sampling
General specificationsDME8i-CDME8o-CDME4io-CDME8i-ESDME8o-ESDME4io-ES
Internal processing32bit32bit32bit32bit32bit32bit
Sampling frequency rateExternal48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer)48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer)48kHz, 96kHz (±37ppm for conductor; ±50ppm for performer)44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)
Internal---48kHz (±50ppm), 96kHz (±50ppm)48kHz (±50ppm), 96kHz (±50ppm)48kHz (±50ppm), 96kHz (±50ppm)
Total harmonic distortionLess than 0.05% (20Hz-40kHz)Less than 0.05% (20Hz-40kHz)Less than 0.05% (20Hz-40kHz)Less than 0.05% (20Hz-40kHz)Less than 0.05% (20Hz-40kHz)Less than 0.05% (20Hz-40kHz)
Frequency response0, +0.5, -1.5dB 20Hz-40kHz0, +0.5, -1.5dB 20Hz-40kHz0, +0.5, -1.5dB 20Hz-40kHz0, +0.5, -1.5dB 20Hz-40kHz0, +0.5, -1.5dB 20Hz-40kHz0, +0.5, -1.5dB 20Hz-40kHz
Dynamic rangeDA: 106dB; AD+DA: 106dBDA: 106dB; AD+DA: 106dBDA: 106dB; AD+DA: 106dBDA: 106dB; AD+DA: 106dBDA: 106dB; AD+DA: 106dBDA: 106dB; AD+DA: 106dB
Hum & noise levelEquivalent input noise-128dBu-128dBu-128dBu-128dBu-128dBu-128dBu
Residual output noise-82dBu-82dBu-82dBu-82dBu-82dBu-82dBu
Crosstalk-80 dB-80 dB-80 dB-80 dB-80 dB-80 dB
Power requirementsAC100-240V 50/60HzAC100-240V 50/60HzAC100-240V 50/60HzAC100-240V 50/60HzAC100-240V 50/60HzAC100-240V 50/60Hz
Power consumption40W40W40W40W40W40W
DimensionsW480mm; 18-7/8in480mm; 18-7/8in480mm; 18-7/8in480mm; 18-7/8in480mm; 18-7/8in480mm; 18-7/8in
H44mm; 1-3/4in (1U)44mm; 1-3/4in (1U)44mm; 1-3/4in (1U)44mm; 1-3/4in (1U)44mm; 1-3/4in (1U)44mm; 1-3/4in (1U)
D361mm; 14-1/4in361mm; 14-1/4in361mm; 14-1/4in361mm; 14-1/4in361mm; 14-1/4in361mm; 14-1/4in
Net weight4.4kg; 9.7lbs4.4kg; 9.7lbs4.4kg; 9.7lbs4.5kg; 9.9lbs4.5kg; 9.9lbs4.5kg; 9.9lbs
AccessoriesOwner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber footOwner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber footOwner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber footOwner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber footOwner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber footOwner's manual, DME Designer Installation Guide, AC power cord, 1x Mini Euro plug (16P), 8x Euro plug (3P), 4x Rubber foot

Input characteristics

Input terminals Gain Actual load impedance For use with nominal Input terminals Connectors
Nominal Max. before Clip
CH INPUT -60dB 3kohms 50-600 ohm Mics*
& 600ohm Lines
-60dBu -40dBu Euroblock
connector
+10dB +10dBu +30dBu

* Mic inputs can supply +48V phantom power

Output Characteristics

Output terminals Impedance For use with nominal Output Level Connectors
Nominal Max. before Clip
CH OUTPUT 75ohms 600ohms +4dBu +24dBu Euroblock connector

Control I/O Characteristics

Terminals Format Latency Level Connector
CobraNet* CobraNet Fixed: 1.33/2.67/5.33 msec 100Base-TX RJ-45 x2 (Primary/Secondary)
EtherSound** EtherSound Calculable: 125μsec (SSI OUT to SSI IN) 100Base-TX RJ-45 x2 (In/Out)

* DME8i-C, DME8o-C and DME4io-C
** DME8i-ES, DME8o-ES and DME4io-ES

Terminals Format Level Connector
GPI * IN - 0-5V Euroblock (3.5mm Pitch)
OUT - TTL
+V - 5V
Ethernet IEEE802.3 10Base-T/100Base-TX RJ-45
USB USB1.1 - Type B
REMOTE RS232C/RS422 RS232C/RS422 D-sub 9pin (male)

*8IN / 4OUT
Inputs: Doesn't apply 2 wire Fader mode
Outputs: Imax/pin = 16mA
Outputs: VH = 2.5V(min.), VL = 0.6V(max.)

Return to Top