Digital Control Panel - DCP Series
All three models are available in either US or EU standardized sizes, built to meet the specifications of most regions around the globe.
DCP1V4S
- 1 Volume & 4 Switch equipped Wall Mount Control panel for MTX/MRX Series.
- Easy connection by CAT5 carrying RS485 + power.
- Maximum 8 DCPs can be connected to 1 MTX/MRX Series.
DCP4S
- 4 Switch equipped Wall Mount Control panel for MTX/MRX Series.
- Easy connection by CAT5 carrying RS485 + power.
- Maximum 8 DCPs can be connected to 1 MTX/MRX Series.
DCP4V4S
- 4 Volume & 4 Switch equipped Wall Mount Control panel for MTX/MRX Series.
- Easy connection by CAT5 carrying RS485 + power.
- Maximum 8 DCPs can be connected to 1 MTX/MRX Series.
Digital Controller Hub
- DCH8
-
Divides the control line from host devices such as the Yamaha MTX/MRX series into up to 8 lines.
Paging Station
PGM1
The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.
- Dante network support
- 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
- Up to 4 units can be connected per system
- PoE powered
- Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
- Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)
PGX1
The PGX1 is a paging station extension that can be used with the PGM1.
- Function expansion for the PGM1
- 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
- Up to 2 units can be connected to each PGM1
- Dimensions: 132(W) × 56(H) × 154(D) mm
- Weight: 0.9 kg (excluding connecting bracket)
Wall-Mount Controller
MCP1
Wall-Mount Controller
- 6 buttons can be assigned to any functions * MTX/MRX series functions (components) are specified via the MTX-MRX Editor
- Multi-language displays supported
- Four user levels for access management
- Up to 16 units can be connected per system
- PoE powered
- Back can adapter supplied
- Dimensions: 149(W) x 125(H) x 18(D) mm
- Weight: 0.5 kg
L2 Switch
SWR2100P-10G
The SWR2100P series network switch equipped with ten RJ45 ports.
- Ports available for PoE power supply: 1-9 / Up link port: 10
- Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)
SWR2100P-5G
The SWR2100P series network switch equipped with five RJ45 ports.
- Ports available for PoE power supply: 1-4 / Up link port: 5 port
- Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)
SWR2311P-10G
Recommended settings for stable operation of a Dante network (such as QoS, EEE, and IGMP Snooping) can be made easily
- LAN ports equipped with PoE supply: 8(1-8)
- LAN/SFP combo ports: 2(9, 10) (The LAN port and SFP slot are exclusively used)
- PoE supply is compliant with IEEE 802.3at, and can supply up to 30W to all PoE ports
Input Expander/Output Expander
- EXi8
-
EXi8 input expanders convert analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be controlled remotely from MTX/MRX series processor via Ethernet cable.
- EXo8
-
EXo8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX/MRX series processors via YDIF.
Exi8/ Exo8 Specifications
| EXi8 | EXo8 | |
|---|---|---|
| Sampling frequency | 48kHz/44.1kH | |
| Signal delay | Less than 2.5ms | |
| Total harmonic distortion | Less than 0.05% (+4dBu , Gain:-6dB); less than 0.1% (+4dBu , Gain:+66dB) | |
| Frequency response | 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max | |
| Dynamic range | 107dB (Gain:-6dB) | |
| Equivalent input noise (EIN) | -126dBu (Gain: +66dB) | |
| Phantom power | +48V (per channel; individually settable) | |
| Crosstalk | -100dB (@1kHz) | |
| Heat dissipation (per hour) | 21.5 kcal max. | |
| Power supply voltage | 100V 50/60Hz | |
| Power consumption | 25 W max. | |
| Dimensions (W x H x D) | 480(W) x 44(H) x 351(D)mm, 1U | 480(W) x 44(H) x 351(D)mm, 1U |
| Included items | Power cord, Euroblock plugs (3-pin, tabbed) x8 | |
EXi8 Analog Input Specifications
| Input terminal | GAIN | Actual load
impedance |
For use with
nominal |
Input Level | Connector | |
|---|---|---|---|---|---|---|
| Nominal | Max. before clip | |||||
| INPUT 1-8 | +66dB | 10kΩ | 50-600Ω Mics
& 600ΩLines |
-62dBu | -42dBu | Euroblock |
| -6dB | +10dBu | +30dBu | ||||
EXi8 Digital Input Specifications
| Terminal | Format | Level | IN/OUT | Connector |
|---|---|---|---|---|
| YDIF In | YDIF | RS-422 | 16IN | RJ45 |
EXo8 Analog Output Specifications
| Output terminal | Actual Source
impedance |
For use with
nominal |
Output Level | Connector | |
|---|---|---|---|---|---|
| Nominal | Max. before clip | ||||
| OUTPUT 1-8 | 75Ω | 10kΩLines | +4dBu | +24dBu | Euroblock |
EXo8 Digital Output Specifications
| Terminal | Format | Level | IN/OUT | Connector |
|---|---|---|---|---|
| YDIF Out | YDIF | RS-422 | 16OUT | RJ45 |
Exi8 / Exo8 Control I/O Specifications
| Terminal | Format | Level | Connector |
|---|---|---|---|
| Network | Ethernet 100Base-TX | - | RJ-45 |
ProVisionaire Control
This Windows software based control and display interface creation tool for customized remote control. It allows you to control a wide range of Yamaha PA equipment such as MTX/MRX, XMV, CL/QL/TF and so on.
ProVisionaire Touch
This iPad control and display interface creation tool for customized remote control of Yamaha PA equipment such as MTX/MRX, XMV, TF-RACK and so on.
Wireless DCP
Wireless DCP is an application for Android and Apple iOS devices that provides remote control of Yamaha MTX series Matrix Processors and Yamaha Siginal Processor MRX7-D.
