Print This Page

SPX2000

OutlineSPX2000
I/OLine inputs2
AD converter24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling
Line outputs2
DA converter24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling
Digital I/O1x AES/EBU (2-in/2-out)
General specificationsSPX2000
Internal processing32bit
Sampling frequency rateInternal44.1kHz, 48kHz, 88.2kHz, 96kHz
External44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delayLess than 426 micro sec
Total harmonic distortionLess than 0.05% (20Hz-40kHz)
Frequency response0, +1, -3dB 20Hz-40kHz
Dynamic rangeAD+DA: 106dB
Hum & noise levelResidual output noise-80dBu
Crosstalk-80 dB
Power requirementsDepend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Power consumption25W
DimensionsW480mm; 18-7/8in
H45mm; 1-3/4in (1U)
D372.5mm; 14-5/8in
Net weight4kg; 8.8lbs
AccessoriesOwner’s manual, AC power cord

Analog input and output characteristics

Terminal LEVEL SW Impedance For use with nominal Level Connector
Nominal Max before clip
INPUT[L,R] +4dBu 10kohms 600ohm Lines +4dBu +24dBu XLR-3-31 type
TRS phone jack (Balanced)
-10dBu -10dBu +10dBu
OUTPUT[L,R] +4dBu 75ohms 600ohm Lines +4dBu +24dBu XLR-3-32
TRS phone jack
-10dBu -10dBu +10dBu

Digital input and output characteristics

Terminal Format Data length Level Connector
AES/EBU (IN) AES/EBU 24bit RS422 XLR-3-31 type (Balanced)
AES/EBU (OUT) AES/EBU 24bit RS422 XLR-3-32 type (Balanced)

Control I/O characteristics

Terminal Format Level Connector
TO HOST USB USB 1.1 0 to 3.3V B type USB Connector
MIDI IN MIDI - DIN Connector 5P
OUT/THRU MIDI - DIN Connector 5P
WORD CLOCK IN - TTL/75ohms BNC Connector

Return to Top