02R96VCM 生産完了品

主要規格

内部処理 32-bit (Accumulator 58-bit)
シーンメモリー数 99
サンプリング周波数 Internal : 44.1kHz, 48kHz, 88.2kHz, 96kHz External: Normal rate 44.1kHz (-10%) to 48kHz (+6%) Double rate 88.2kHz (-10%) to 96kHz (+6%)
フェーダー motorized, touch sensitive : 100mm x 25
フェーダー解像度 0 ~ -96 ~ -∞dB(256 steps / 100mm ) master faders
+10 ~ -72 ~ -∞dB(256 steps / 100mm) other faders
0 ~ -96 ~ -∞dB(256 steps / 100mm) stereo fader
全高調波歪率 *
 Input Gain=Min.
Less than 0.05%, 20Hz to 20 kHz @+14dB into 600Ω
Less than 0.01%, 1kHz @+18dB into 600Ω
CH INPUT to STEREO OUT
(@Sampling frequency = 96 kHz)
周波数特性 0.5, -1.5dB, 20Hz to 20 kHz @+4dB into 600Ω
(@Sampling frequency = 48 kHz)
0.5, -1.5dB, 20Hz to 40 kHz @+4dB into 600Ω
(@Sampling frequency = 96 kHz)
ダイナミックレンジ
(maximum level to noise level)
110dB typ. DA Converter (STEREO OUT)
105dB typ. AD+DA (to STEREO OUT)
ハム&ノイズレベル **
 (20Hz~20kHz)
 Rs=150Ω
 Input Gain=Max
 Input Pad=0dB
 Input Sensitivity=-60dB
-128dB Equivalent Input Noise.(20Hz to 20 kHz)
-92dB residual output noise. STEREO OUT
STEREO OUT off.
-92dB(98dB S/N) STEREO OUT,
STEREO fader at nominal level and all CH INPUT faders at minimum level.
-64dB(68dB S/N) STEREO OUT
STEREO fader at nominal level and one CH INPUT fader at nominal level
クロストーク(@1kHz)
 Input Gain=Min
-80dB adjacent input channels (CH1 to 24)
-80dB input to output
消費電力(電源・電圧) 190W(100V 50/60Hz)(with MB02R96)
寸法 (W x H x D) 02R96VCM: 667 x 239 x 697 mm
With MB and SP: 700 x 352 x 762 mm
質量 02R96VCM: 34kg
With MB and SP: 39.4kg

* 全高調波歪率の」設定は80kHz,18dB/Octのフィルターを用いています。
 ハム&ノイズレベルの測定には20kHz,18dB/Octに相当する、12.7kHz,6dB/Octのフィルターを用いています。

ライブラリー

Effect libraries
(EFFECT1-4)
factory presets
user libraries
52(EFFECT3-4 :44)
76
Compressor libraries factory presets
user libraries
36
92
Gate libraries factory presets
user libraries
4
124
EQ libraries factory presets
user libraries
40
160
Channel libraries factory presets
user libraries
2
127
Surround Monitor libraries factory presets
user libraries
1
32
Input patch libraries factory presets
user libraries
1
32
Output patch libraries factory presets
user libraries
1
32
Bus to stereo libraries factory presets
user libraries
1
32

アナログ入力規格

入力端子 PAD GAIN 入力インピーダンス ソースインピーダンス 入力レベル コネクター
感度 *1 規定レベル 最大ノンクリップレベル
CH INPUT
A/B 1-16
0 -60dB 3kΩ 50-600Ω Mics & 600Ω Lines -70dBu -60dBu -46dBu A:XLR3-31 type *2(Balanced)
B:Phone Jack *3
(TRS)(Balanced)
-16dB -26dBu -16dBu -2dBu
26 0dBu +10dBu +24dBu
CH INPUT
17-24
-34dB 4kΩ 600Ω Lines -44dBu -34dBu -20dBu Phone Jack *3
(TRS)(Balanced)
+10dB 0dBu +10dBu +24dBu
CH INSERT IN 1-16 10kΩ 600Ω Lines -6dBu +4dBu +18dBu Phone Jack *4
(TRS)(Balanced)
2TR IN ANALOG1(L,R) 10kΩ 600Ω Lines +4dBu +4dBu +18dBu Phone Jack *3
(TRS)(Balanced)
2TR IN ANALOG2(L,R) 10kΩ 600Ω Lines -10dBV -10dBV +4dBV RCA pin jack (Unbalanced)

*1.Sensitivity is the lowest level that will produce an output of +4dB(1.23V) or the nominal output level when the unit is set to maximum gain.(all faders and level controls are maximum position.)
*2.XLR-3-31 type connectors are balanced.(1/Sleeve = GND, 2/Tip = HOT, 3/Ring = COLD)
*3.Phone jacks are balanced.(Tip = HOT, Ring = COLD, Sleeve = GND)
*4.CH INSERT IN/OUT phone jacks are unbalanced.(Tip=OUTPUT, Ring=INPUT, Sleeve=GND)
※In these specifications, when dB represents are specific voltage, 0dB is referenced to 0.775 Vrms
※For 2TR IN ANALOG 2 levels, 0dBV is referenced to 1.00 Vrms.
※All 24 AD converters(CH1-24) are 24 bit linear,128times oversampling.
※+48V DC(phantom power) is supplied to CH INPUT(1-24) XLR type connectors via each individual switch.

アナログ出力規格

出力端子 出力インピーダンス 負荷インピーダンス GAIN SW 出力レベル コネクター
規定レベル 最大ノンクリップレベル
STEREO OUT(L,R) 600Ω 10kΩ Lines - -10dBV +4dBV RCA pin jack
(Unbalanced)
75Ω 600kΩ Lines - +4dBu +18dBu XLR3-32 type *1
(Balanced)
STUDIO MONITOR OUT(L,R) 75Ω 10kΩ Lines - +4dBu +18dBu Phone Jack *2
(TRS)(Balanced)
C-R MONITOR OUT(L,R) 75Ω 600kΩ Lines - +4dBu +18dBu Phone Jack *2
(TRS)(Balanced)
OMNI OUT 1-8 75Ω 10kΩ Lines +18dB
(default)
+4dBu +18dBu Phone Jack *2
(TRS)(Balanced)
+4dB -10dBu +4dBu
INSERT OUT 1-16 600Ω 10kΩ Lines - +4dB +18dB Phone Jack *4
(Unbalanced)
PHONES 100Ω 8Ω Lines - 4mW 25mW Stereo Phone Jack *3
(TRS)(Unbalanced)
40Ω Lines - 12mW 75mW

*1.XLR-3-32 type connectors are balanced.(1 = GND, 2 = HOT, 3 = COLD)
*2.Phone jack are balanced.(Tip = HOT, Ring = COLD, Sleeve = GND)
*3.PHONES stereo phone jack is unbalanced.(Tip = LEFT, Ring = RIGHT, Sleeve = GND)
*4.CH INSERT IN/OUT phone jacks are unbalanced.(Tip=OUTPUT, Ring=INPUT, Sleeve=GND)
*5.+24dB、+20dB、+18dB、+15dBへの切替が可能(ヤマハサービス拠点での有償対応となります)。
*6.+4dBへの切替が可能(内部GAIN SWの切替はヤマハサービス拠点での対応となります)。
※STEREO OUT [L,R] , 0dBV is referenced to 1.00 Vrms.
※In these specifications, when dB represents are specific voltage, 0dB is referenced to 0.775 Vrms.
※All output(except INSERT OUT 1-24) DA converters are 24 bit, 128times oversampling.

デジタル入力規格

端子 フォーマット データ長 レベル コネクター
2TR IN DIGITAL 1 AES/EBU 24bit RS422 XLR3-31 type(Balanced) *1
2 IEC-60958 24bit 0.5Vpp/75Ω RCA pin jack
3 IEC-60958 24bit 0.5Vpp/75Ω RCA pin jack
CASCADE IN - - RS422 D-sub Half Pitch Connector 68P (female)

*1.XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)

デジタル出力規格

端子 フォーマット データ長 レベル コネクター
2TR OUT DIGITAL 1 AES/EBU
(Professional use) *1
24bit *3 RS422 XLR3-32 type(Balanced) *4
2 IEC-60958
(Consumer Use) *2
24bit *3 0.5Vpp/75Ω RCA pin jack
3 IEC-60958
(Consumer Use) *2
24bit *3 0.5Vpp/75Ω RCA pin jack
CASCADE OUT - - RS422 D-sub Half Pitch Connector 68P (female)

*1.channel status of 2TR OUT DIGITAL 1
type : 2 audiochannels
emphasis : NO
sampling rate : depends on the internal configuration
*2.channel status of 2TR OUT DIGITAL 2, 3
type : 2 audio channels
category code : 2 channel PCM encoder/decoder
copy prohibit : NO
emphasis : NO
clock accuracy : Level II(1000 ppm)
sampling rate : depends on the internal configuration
*3.dither : word length 16 - 24 bit
*4.XLR-3-32 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)