Print This Page

Dante Accelerator Driver V2.0.2 for Win (Previous version)

Important Notice

  • You need to update the Dante Accelerator Firmware to V2.5.0

・On Windows 10, please refer to the following contents.



On Windows10, the following services may affect the playback and recording performance.
If necessary, please stop those services.


- Print Spooler
- SSDP Discovery
- Superfetch
- Windows Search
- Intel HD Graphics Control Panel Service
- Diagnostic Policy Service
- Diagnostic Service Host
- Diagnostics Tracking Service
- Background Intelligent Transfer Service
- Skype Click to Call PNR Service
- Skype Click to Call Updater

Dante Accelerator Firmware/Driver Compatibility

Firmware Driver
Win Mac
2.5.0-3 2.0.3/2.0.2 2.5.1/2.5.0
2.0.0-2 2.0.1 2.0.0
1.0.1-2 1.0.1 1.0.1
1.0.0 1.0.1 1.0.0

Main Revisions and Enhancements

Fixed Bug

V2.0.2

  • Solved some minor problems.

Known Issue

  • When opening the control panel of Dante Accelerator Driver, a warning message ".NET Framework" may appear and the control panel does not open.
    In such a case, please download and install the latest ".NET Framework3.5".
  • If a Dante Accelerator is installed, an error may occur when recovering from the sleep mode. Please turn off the sleep mode.
  • During installation of the driver on Windows 10, a message “Setup Failed” might be displayed. In such a case, exit the installer once, and start the installer again to complete the installation.

System Requirements

OS Windows 10/8.1/8/7 (SP1)
CPU 32-bit : Intel Core i5 / Intel Core i7 (2nd Generation "Sandy Bridge" Core i7 or later recommended) 
64-bit : Intel Core i5 / Intel Core i7 (2nd Generation "Sandy Bridge" Core i7 or later recommended) 
RAM 8GB
HDD 64M Cache (recommended) 7200rpm
PCIe SLOT x4 lane or above
*Please refer to system requirements of NUAGE

former version information.

V2.0.2

Fixed Bug
  • Solved some minor problems.
Known Issue
  • When opening the control panel of Dante Accelerator Driver, a warning message ".NET Framework" may appear and the control panel does not open.
    In such a case, please download and install the latest ".NET Framework3.5".
  • If a Dante Accelerator is installed, an error may occur when recovering from the sleep mode. Please turn off the sleep mode.
  • During installation of the driver on Windows 10, a message “Setup Failed” might be displayed. In such a case, exit the installer once, and start the installer again to complete the installation.

V2.0.1

Fixed Bug
  • Solved a problem in which an error message was displayed and the Dante Accelerator Driver could not be installed. Updating to V2.0.1 is not necessary if you are already using V2.0.0 since only the installer was fixed and the driver was not changed.

V2.0.0

Specification Changes
  • Now supports Dante Redundancy. (The secondary port became available.)

V1.0.0

  • 1st. Release Version.

License agreement and software

Dante Accelerator Driver V2.0.2 for Win (Previous version)

Return to Top