|
||||
 |
 |
 |
 |
 |
 |
 |
| Internal processing | 32bit (Accumulator 58bit) | ||
| Number of scene memories | 99 | ||
| Sampling frequency | Internal | 44.1kHz, 48kHz, 88.2kHz, 96kHz | |
| External | Normal rate: 44.1kHz-10% - 48kHz+6% Double rate: 88.2kHz-10% - 96kHz+6% |
||
| Signal delay | Less than 1.6ms CH INPUT to STEREO OUT (@Sampling frequency = 48kHz) Less than 0.8ms CH INPUT to STEREO OUT (@Sampling frequency = 96kHz) |
||
| Fader resolution | 100mm motorized x17 | ||
| Total harmonic distortion * Input GAIN=Min. |
CH INPUT to STEREO OUT Less than 0.05%, 20Hz to 20kHz @+14dB into 600ohms Less than 0.01%, 1kHz @+24dB into 600ohms (@Sampling frequency = 48kHz) Less than 0.05%, 20Hz to 40kHz @+14dB into 600ohms Less than 0.01%, 1kHz @+24dB into 600ohms (@Sampling frequency = 96kHz) |
||
| Frequency response | CH INPUT to STEREO OUT 0.5, -1.5dB, 20Hz - 20kHz @+4dB into 600ohms (@Sampling frequency = 48kHz) 0.5, -1.5dB, 20Hz - 40kHz @+4dB into 600ohms (@Sampling frequency = 96kHz) |
||
| Dynamic range (maximum level to noise level) |
110dB typ. DA Converter (STEREO OUT) 106dB typ. AD+DA (to STEREO OUT) @fs=48kHz 106dB typ. AD+DA (to STEREO OUT) @fs=96kHz |
||
| Hum & noise level ** (20Hz-20kHz) Rs=150ohms Input GAIN=Max Input PAD=0dB Input PAD=0dB Input sensitivity=-60dB |
-128dB Equivalent Input Noise. -86dB residual output noise. STEREO OUT STEREO OUT off. -86dB (90dB S/N)STEREO OUT STEREO fader at nominal level and all CH INPUT faders at minimum level. -64dB (68dB S/N) STEREO OUT STEREO fader at nominal level andone CH INPUT fader at nominal level |
||
| Maximum voltage gain | 74dB CH INPUT (CH1-12) to STEREO OUT/OMNI (BUS) OUT 40dB CH INPUT (CH13-16) to STEREO OUT 74dB CH INPUT (CH1-12) to OMNI (AUX) OUT (via pre input fader) 74dB CH INPUT (CH1-12) to MONITOR OUT (via STEREO BUS) |
||
| Crosstalk(@1kHz) Input GAIN=min |
80dB adjacent input channels (CH1-12) 80dB adjacent input channels (CH13-16) 80dB input to output |
||
* Total Harmonic Distortion is measured with a 6dB/octave filter @80kHz.
** Hum & Noise are measured with a 6dB/ octave filter @12.7kHz;equivalent to a 20kHz filter with infinite dB/octave attenuation.
| Power requirements | Japan: | AC100V 50/60Hz, 90W |
| North America: | AC120V, 60Hz, 90W | |
| Other Areas: | AC220-240V, 50/60Hz, 90W | |
| Dimensions (W x H x D) |
436 x 150 x 548 mm / 17.2 x 5.9 x 21.3 in | |
| Weight | 15kg / 33.1lbs | |
| Input terminal | PAD | GAIN | Actual load impedance | For use with nominal | Input level | Connector | ||
|---|---|---|---|---|---|---|---|---|
| Sensitivity | Nominal | Max. before clip | ||||||
| CH INPUT 1 to 12 |
0 | -60dB | 3kohms | 50-600ohm Mics & 600ohm Lines | -70dB | -60dB | -40dB | A:XLR-3-31 type (Balanced) B:TRS phone jack (Balanced) |
| -16dB | -26dB | -16dB | +4dB | |||||
| 20 | -6dB | +4dB | +24dB | |||||
| CH INPUT 13 to 16 |
-26dB | 10kohms | 600ohm Lines | -36dB | -26dB | -6dB | TRS phone jack (Balanced) | |
| +4dB | -6dBV | +4dB | +24dB | |||||
| CH INSERT IN 1 to 12 | 10kohms | 600ohm Lines | -6dB | +4dB | +24dB | TRS phone jack (Unbalanced) | ||
| 2TR IN [L,R] | 10kohms | 600ohm Lines | -10dB | -10dB | +10dB | RCA pin jack (Unbalanced) | ||
| Output terminal | Actual source impedance | For use with nominal | Output level | Connector | |
|---|---|---|---|---|---|
| Nominal | Max. before clip | ||||
| STEREO OUT L,R | 150ohms | 600ohm Lines | +4dB | +24dB | XLR-3-32 type (Balanced) |
| OMNI OUT 1 to 4 | 150ohms | 10kohm Lines | +4dB | +24dB | TRS phone jack (Balanced) |
| MONITOR OUT L,R | 150ohms | 10kohm Lines | +4dB | +24dB | TRS phone jack (Balanced) |
| CH INSERT OUT 1 to 12 | 600ohms | 10kohm Lines | +4dB | +24dB | TRS phone jack (Unbalanced) |
| 2TR OUT [L,R] | 10Kohms | 600ohm Lines | -10dBV | +10dBV | RCA pin jack (Unbalanced) |
| PHONES | 100ohms | 8ohm Lines | 4mW | 25mW | ST phone jack (Unbalanced) |
| 40ohm Lines | 12mW | 75mW | |||
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| 2TR IN DIGITAL | IEC-60958 | 24bit | 0.5Vpp/75ohms | RCA pin jack |
| ADAT IN | ADAT *1 | 24bit | - | OPTICAL |
| Terminal | Format | Data length | Level | Connector |
|---|---|---|---|---|
| 2TR OUT DIGITAL | IEC-60958 Consumer use |
24bit | 0.5Vpp/75ohms | RCA pin jack |
| ADAT OUT | ADAT | 24bit | - | OPTICAL |
| Terminal | Format | Level | Connector | |
|---|---|---|---|---|
| TO HOST USB | USB | 0V - 3.3V | B type USB connector | |
| MIDI | IN *1 | MIDI | - | DIN Connector 5P |
| OUT | MIDI | - | DIN Connector 5P | |
| THRU | MIDI | - | DIN Connector 5P | |
| WORD CLOCK | IN | - | TTL/75ohms | BNC Connector |
| OUT | - | TTL/75ohms | BNC Connector | |
*1. MIDI IN can use as TIME CODE IN MTC.
